Eiki Projector Lc Xb22 User Manual

31
Computer Input
Computer Input
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Screen Menu icon.
When the Digital zoom + is selected, the On-Screen Menu
disappears and the message “D. Zoom +” is displayed.  Press the
SELECT button to expand the image size.  And press the Point
e ed
d
7 8buttons to pan the image.  The Panning function...

32
Choose Video by pressing the INPUT button on the top control or
the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Input Menu icon.
Press the Point d dbutton to move the red arrow pointer to
Video. Then press the SELECT button to display the Source
Select Menu. 
1
2Move the pointer to...

33
Video Input
Video Input
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Input Menu icon.1
Press the Point d dbutton to move the red arrow pointer to
Computer 1, and then press the SELECT button to display
the Source Select Menu.   2
Move the pointer to the correct input source and then press
the SELECT button.3
Move the pointer (red arrow)
to Computer 1 and press the
SELECT button.
Move the pointer to
Component or RGB (Scart)
and...

34
Video Input
AV System Menu (Video or S-Video)
AV System Menu (Component)
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the AV System Menu icon.
Press the Point d dbutton to move the red arrow pointer to
the system that you want to select and then press the
SELECT button.
1
2
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC4.43, PAL-M, and...

35
Video Input
Video Input
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Image Select Menu icon.1
2Press the Point d dbutton to move the red frame pointer to
the level that you want to set and then press the SELECT
button.
The level being selected.
Image Select Menu
Normal picture level preset on this projector.Standard
Picture level adjusted for the picture with fine tone.Cinema
Blackboard(Green)
User preset image in the Image...

36
Video Input
Press the Point 7 8buttons to
adjust value.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Image Adjust Menu icon.1
2Press the Point d dbutton to move the red frame pointer to
the item that you want to adjust and then press the SELECT
button.  The level of each item is displayed.  Adjust each
level by pressing the Point 
7 8buttons.Move the red frame pointer to
the item you want to adjust
and then press the SELECT...

37
Video Input
Video Input
To store the adjustment data, move the red frame pointer to the
Store icon and press the SELECT button to display the Image
Level Menu.  Move the red frame pointer to the Image Level 1 to
4 and then press the SELECT button.
Image Level Menu
Move the red frame pointer
to an image icon to be set
and then press the SELECT
button.
Reset all adjustments to their previous figure.
Reset
Store
Close the Image Adjust Menu.
Quit
Interlaced video signal can be displayed in a progressive...

38
Video Input
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Screen Menu icon.
Press the Point d dbutton and move the red frame pointer to
the function that you want to select and then press the
SELECT button.
1
2
Move the red frame to a function and
press the SELECT button.
Screen Menu
Screen Menu icon
Provide image at a wide screen...

39
Keystone
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
Display
This function decides whether to display On-Screen Displays.
On  . . . . . . . shows all the On-Screen Displays.
Off  . . . . . . . does not show On-Screen Displays except;...

40
Setting
Capture
This function enables you to capture the image being projected
and use it for a start-up display or interval of presentations.  
After capturing the projected image, go to the Logo function and
set it to “User”.  Then the captured image can be displayed when
turning on the projector next time or pressing the NO SHOW
button.  (p23) 
To capture the image, select [Yes].  To cancel the Capture
function, select [No].  
✔Note:
• Before capturing an image, select Standard in the Image Select...