Eiki Projector Lc Xb22 User Manual

21
Basic Operation
Basic Operation
Menu Bar
PC System Menu
Used to select
computer system.
(p25)
Image Adjust Menu
Used to adjust computer image. [Contrast / Brightness / Color
temp. / 
White balance (R/G/B) /Sharpness / Gamma](p30)
Setting Menu
Used to change
settings of the
projector or reset  lamp
replace counter. 
(p39-44)
Sound Menu
Used to adjust
volume or mute
sound.  (p23)
Image Select Menu
Used to select  an
image level among
Standard, Real,
Blackboard(Green),
and Image 1 ~ 4.
(p29)
For computer...

22
Press the FREEZE button on the remote control to freeze the
picture on the screen.  To cancel the Freeze function, press the
FREEZE button again or press any other button.  (p11)
If a projected picture has keystone distortion, correct the image with Keystone adjustment.
Basic Operation
•The arrows are white when there is no correction.
•The arrows disappear at the maximum correction.
•The direction of the arrow being corrected turns red.
•If you press the KEYSTONE button on the top control
or on the...

23
Basic Operation
Basic Operation
Press the NO SHOW button on the remote control to black out the
image.  To restore to normal, press the NO SHOW button again or
press any other button.  When a projected image is captured and
set as “User” in the Logo item in the Setting Menu (p40), the
screen changes each time you press the NO SHOW button as
follows.
The message disappears after 4 seconds.
Press the P-TIMER button on the remote control.  The timer
display “00 : 00” appears on the screen and the timer...

24
Choose either Computer 1 or Computer 2 by pressing the INPUT
button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Input Menu icon.1
Computer
1
Input Menu
Press the Point d d 
 button to move the red arrow pointer to
either Computer 1 or Computer 2, and...

25
Computer Input
Computer Input
The Auto PC Adjustment
function operates to adjust the
projector. 
PC System Menu
The PC System Menu icon 
displays the system being
selected.
The systems on this dialog
box can be selected.Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the PC System Menu icon.
Press the Point d d 
 button to move the red arrow pointer to
the system that you want to set, and then press the 
SELECT
button.  
1
2
PC System...

26
Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to
your computer.  Auto PC Adjustment function can be operated as follows.
Move the red frame pointer to
the Auto PC Adj. icon and
press the SELECT button.
PC Adjust Menu
PC Adjust Menu icon
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector.  Once parameters are memorized, the
setting can be done just by...

27
Computer Input
Computer Input
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.  Manual PC
Adjustment enables you to precisely adjust several parameters to match those signal formats.  The projector has 5
independent memory areas to memorize those parameters manually adjusted.  It allows you to recall the setting for a
specific computer. 
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame...

28
Computer Input
Select the resolution at the Display area dialog box.Display area
Adjust the horizontal area displayed by this projector.  Press the
Point 
7 8buttons to decrease/increase value and then press the
SELECT button.Display area H
Adjust the vertical area displayed by this projector.  Press the Point
7 8buttons to decrease/increase value and then press the
SELECT button.Display area V
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio.  It is displayed at 5 : 4 aspect...

29
Computer Input
Computer Input
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Image Select Menu icon.1
2Press the Point d dbutton to move the red frame pointer to
the level that you want to set and then press the SELECT
button.Move the red frame pointer to
the level and press the
SELECT button.
The level being selected.
Image Select Menu
Normal picture level preset on this projector.Standard
Picture level with improved halftone for...

30
Computer Input
Press the Point 7 8 buttons to
adjust value.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Image Adjust Menu icon.1
2Press the Point d dbutton to move the red frame pointer to
the item that you want to adjust, and then press the SELECT
button.  The level of each item is displayed.  Adjust each
level by pressing the Point 
7 8buttons.Move the red frame pointer to
the item to be selected and
then press the SELECT...