Eiki Projector Lc Xb22 User Manual

MULTIMEDIA PROJECTOR
OWNER’S MANUAL
MODEL   LC-XB22 

2
Features and Design
◆Compact Design
This projector is designed compact in size and weight.  It is
easy to carry and work anywhere you wish to use.
◆Compatibility
The projector widely accepts various video and computer
input signals including; Computers, 6 Color systems (PAL,
SECAM, NTSC, NTSC4.43, PAL-M, PAL-N), Component
video, S-video and RGB scart.
◆Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly.  (See page 25.)...

3
Table of Contents
Features and Design  . . . . . . . . . . . . . . . . . . .2
Table of Contents  . . . . . . . . . . . . . . . . . . . . . .3
To the Owner  . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions  . . . . . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Position 6
Moving the Projector 6
Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions  . . . . . . . . . . . . . .8
Front 8
Back 8
Bottom 8
Rear...

4
To the Owner
CAUTION : T O  REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK).  NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before operating this...

5
Safety Instructions
All the safety and operating instructions shoule be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

6
Safety Instructions
USE CAUTION IN CARRYING OR 
TRANSPORTING THE PROJECTOR
–Do not drop or bump a projector, otherwise damages or
malfunctions may result.
–When carrying a projector, use a suitable carrying case.
–Do not transport a projector by using a courier or transport
service in an unsuitable transport case.  This may cause
damage to a projector.  To transport a projector through a
courier or transport service, consult your dealer for their
information.
Moving the Projector
When moving the...

7
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug.  This is a safety feature to be sure that the plug will fit into
the power outlet.  Do not try to defeat this safety feature.  Should you be...

8
Bottom
qPower Cord Connector
wInfrared Remote Receiver
eZoom Lever
rFocus Ring
tProjection Lens
yLens Cover(See page 46 for attaching.)
uAir Intake Vent
!6Exhaust Vent
!6i
!5
!2!4!3
o
!1
!0
CAUTION
Hot air is exhausted from the exhaust vent.
Do not put heat-sensitive objects near this
side.
qwertyu
Back Front
Part Names and Functions
!2Lamp Cover
!3Air Intake Vent (back and bottom)
!4Air Filter 
!5Adjustable Feet
iTop Controls and Indicators
oAir Intake Vent
!0Terminals and Connectors
!1Speaker 

9
Part Names and Functions
A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the RESET
button with a pen, which will shut down and restart the unit.  Do not use the
RESET function excessively.
qCOMPUTER IN 1/ COMPONENT IN 
Connect output signal from a computer (Analog RGB) or
video equipment (Component or RGB Scart) to this
terminal.  Optional cables are required when using this
terminal as component input or RGB Scart...

10
Part Names and Functions
ON - OFFPOWER
KEYSTONE   INPUT
WARNING
LAMP
REPLACE
SELECT
MENUVOLUME–VOLUME+
qwerty
oiu
uLAMP REPLACE indicator
Turn yellow when the life of the projection lamp draws
to an end.  (p48, 52)
yWARNING indicator
Light red when the projector detects abnormal condition.
This also blinks red when the internal temperature of the
projector exceeds the operating range.  (p45, 52)
ePOWER ON–OFF button
Turn the projector on or off.  (p18, 19)
t
POWER indicator
Blink red until the...