Eiki Projector Lc Wul100 User Manual

Setting
Key lockKey lock
PIN code lock
This function locks the side control and remote control buttons to prevent operation by unauthorized persons.
…Unlocked.
…Lock the operation of the side control.   To unlock, use the remote control.… Lock the operation of the remote control.    To unlock, use the side control.
If the side control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the...

Setting
Use the Point ▲▼ buttons to select Off, On 1 or On 2. Press the SELECT button to close the dialog box.
Change the PIN code lock setting
Enter a PIN code
When using side control
Use the Point ▲▼ buttons on the side control to select a number. Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to . If you fix an incorrect number, use the Point ◄ button to move the pointer to the number you want to correct, and then enter the correct...

Setting
Shutter
Note:
	 		
With	 the	Shutter	 closed	up,	if	the 	power	 is	turned	 off	and	 the	Shutter 	management	 is	shut	 down	 when	is	being	 set	the	 Shutter 	key, 	the	 Shutter 	function	 is	still	 available	 after	the	power	is	on.	 (When	 the	Shutter	 is	closed,	 the	last	operation	cannot	be	stored.)
Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters.
Prohibit the shutter operation from the remote control and the...

When you want to make a digital processing of a projected image faster, set this function.Use the Point ▲▼ buttons, select an item of Off/Low/Mid/High.Digital processing speed becomes fast by order of Low → Mid → High. High is the fastest.
Video delay control
Fig .1
Note:
		-	The	following	functions	are	not	available	respectively	when	Video	delay	control	is	set	to	Low/Mid/High.Low	...		Keystone	can	not	be	selected.Mid	...			Progressive	and	Noise reduction	can	not	be	selected.High	...		Keystone,...

This function returns all setting values except for User logo, PIN code lock, Logo PIN code lock and Filter counter to the factory default settings.
Various test pattern are available for use when setting up the projector: Color, Gradation1-4, All white, All black and Cross.
Filter replacement icon appears on the screen at a set time.
Note:
	 •	Do	not	reset	the	counter	when	the	filter	or	the	filter	cartridge	is	not	replaced.	 •	Timer	setting	notifies	that	the	filter	needs	replacement.	To	replace	the...

Filter prevents dust from accumulating on the optical elements inside th\
e projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to replace the filter easily. The projector monitors the condition of the filter at all time and repla\
ces a filter with a new one automatically when it detects the...

Turn off the projector, and unplug the AC power cord from the AC outlet.
First, clean up the dust on the projector and around the air vents.
1
2
Press ▼ downwards on the filter cover to release the latch and open the filter cover.3
Put the new one back into the position and close the filter cover. Make sure that the filter cartridge is properly and fully inserted.
5
CAUTIONMake sure the filter cartridge is inserted in the projector. If the filter cartridge is not inserted, the projector cannot be turned...

Be sure to reset the Scroll counter after replacing the filter cartridge. 
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Setting and then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select Filter counter and then press the SELECT button. Use the Point ▲▼ buttons to select Scroll counter reset and then press the SELECT button. Scroll counter Reset? appears. Select ye s to continue.
1
2
Scroll counter
3Another confirmation dialog box...

Turn off the projector and unplug the AC power cord. Let the projector cool for at least 45 minutes.
Loosen the screws and open the lamp cover. Loosen 3 screws of the lamp and pull out the lamp by using the built in handle.
1
3Replace the lamp with a new one. Make sure that the lamp is properly and fully inserted. 
4
2
Connect the AC power cord to the projector and turn on the projector.
Follow these steps to replace the lamp.
5
Note:
	 Be	sure	to	insert	the	lamp	in	the	correct	direction.
For continued...

ORDER REPLACEMENT LAMP
Replacement  lamp  can  be  ordered  through  your  dealer.  When  ordering,  give  the  following information to the dealer.
 ●   Model No . of your projector  : LC-WUL100, LC-WUL100L
 ●   Replacement Lamp Type No .  : POA-LMP136                  (Service Parts No.610 346 9607)
Maintenance and Care
This projector uses a high-pressure lamp which must be handled carefully\
 and properly. Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp  lifetime...