Eiki Projector Lc Wul100 User Manual

Computer Input
Image adjust Menu
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button.
1
2Use the Point ▲▼ buttons to select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value.
Note:
  When	White	balance	Red,	Green	or	Blue	is	adjusted,	Color temp.	will	change	to	Adj..
Press the Point ◄ button to decrease the contrast;...

Select the desired screen size that conforms to the input signal source.
SCREEN MENU
Provide the image within a screen size keeping its original aspect ratio.
Note:
		•	The	projector	cannot	display	any	resolution	higher	than	1920	x	1200.	If	your	computer’s	screen	resolution	is	higher	than	1920	x	1200,	lower	the	resolution	before	connecting	the	projector.
	 •	The	image	data	other	than	1920	x	1200	is	modified	 to	fit	the	 screen	 size	in	initial	mode.
	 •	Full,	Zoom, True, Custom adj. and	Digital zoom +/–...

Computer Input
Adjust the screen scale and position manually with this function.Press the Point ► button or the SELECT button at Custom adj . and Custom adj . is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust. Scale H/V ........  Adjust the Horizontal/Vertical screen scale. H&V .................  When set to On, the aspect ratio is fixed. Scale V appears dim and becomes unavailable. Adjust Scale H, and then the screen scale is automatically modified based...

Computer Input
This function is used to adjust keystone distortion of the  projected image. Use the Point ▲▼ buttons to choose the item you want to adjust.Keystone
This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at ye s.
Ceiling 
Rear 
When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a...

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PA L, SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.When the Video System is 1035i, 1080i or 1080p, select the system manually.
If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i, and 1080p....

Normal picture level preset on the projector. 
Picture level adjusted with fine tone.
User preset picture adjustment in the Image adjust Menu. (p.48)
Video Input
Image select Menu
1
2
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image select and then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired item and then press the SELECT button.
Image Level Selection
Menu Operation
Standard
Cinema
Image 1–10
For viewing pictures in a...

1
2
Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63).
Press the Point ◄ button to lighten red tone; press the Point ► button to deepen red tone (from 0 to 63).
Press the Point ◄ button to lighten green tone; press the Point ► button to deepen green tone (from 0 to 63).
Press the Point ◄ button to lighten blue tone;...

Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 31).
An interlaced video signal can be displayed in progressive mode. Press the Point ◄► buttons to change the progressive scan mode. Off .............Progressive scan mode is Off. On  .............Progressive scan mode is On . Film ........... 
For watching a...

Note:
	 •		
When	no	signal	is	detected,	Normal	is	set	automatically	and	the	Aspect	dialog	box	disappears.	 •		
The	adjustable	range	for	Scale	H/V	and	Position	H/V	are	limited	depending	on	the	input	signal.	 •		Natural wide	cannot	be	selected	when	720p,	1035i,	1080i	or	1080p is	selected	on	 AV	System	Menu	(p.45).
Video Input
Custom adj .
1
2
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or the SELECT button.
Use the Point ▲▼...

Video Input
This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at ye s.
Ceiling 
Rear 
When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.
When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the...