Eiki Projector Lc Wnb3000n User Manual

79
Network Control Software Application
 
ADMINISTRATOR MODE
User name: admin
Password:  (Default password  setting is 
disabled.)
 
Home (Status):Show current projector status and network configuration settings. 

80
Network Control Software Application
ITEMITEM SETTINGDESCRIPTION
StatusProjector NameShow projector name.
System StatusShow if projector is Power On or Inactive .
Input SourceShow current input source.
Lamp HoursShow lamp used hours on current projector.
Filter HoursShow filter used hours on current projector.
Wired LANIP AddressShow current IP address of wired LAN.
Subnet MaskShow current Subnet Mask of wired LAN.
GatewayShow current Gateway of wired LAN.
MAC AddressShow current MAC Address of wired...

81
Network Control Software Application
ITEM SETTINGDESCRIPTIONBasicProjector NameShow projector name on the current projector.
PowerPower On or Power Off the projector via network.Input SourceSelect input source.PictureBrightnessAdjust the image brightness level.ContrastAdjust the image contrast level.SharpnessAdjust the image sharpness.ColorAdjust the strength of whole color.This  function  can  only  be  used  under  Video  signal,  S-Video  signal,  or  component video signal input.TintAdjust the...

82
Network Control Software Application
Network :Set up network configuration and password from this page.
ITEM SETTINGDESCRIPTION
Network
DHCPAssign an IP address to the projector from the DHCP server automatically.
IP AddressSet up IP Address when DHCP is disabled.
Subnet MaskSet up Subnet Mask when DHCP is disabled.
GatewaySet up Gateway when DHCP is disabled.
DNS ServerSet up DNS Server address when DHCP is disabled.
Group NameCreate projector group. (Max length: 14 characters)
Projector NameCreate...

83
Network Control Software Application
Alert:Show and setup Alert configurations.
When problem occurs to the projector, it will automatically send e-mail to remind user.
How to opearte:
1. Enter Email Setting columns.
2. Enter SMTP Setting columns.
3. Select Alert Condition. Multiple choices are fine.
4. Press Submit to confirm.
5.  
After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to 
see if the attendees can receive the e-mail.  If the attendees...

84
Network Control Software Application
Schedule :Show and set up Schedule, including Weekly Schedule and Specific Day.
Weekly Schedule
To power on and power off projector based on Weekly Schedule.
How to set up:
1. Choose week days.2. Set up power-on or power-off time.    ( Please be sure that the interval between power-on and off setting is more than 5 minutes.)3. Enter Input Source and select input source.4. After completing setting, press ADD to confirm.5. To cancel items, select the item and press...

85
Before Use 
85
Network Control Software Application
Time :
1. Current System Time Setting : Refresh the date/time on the webpage if you click   
                                                      “Refresh” bu\
tton.
2.System Time Setting : To set the date/time manually
                                        Enter the Date in Month/Day/Year format. 
                                        Enter the Time in Hour/Minute/Second format. 
3. Click the “Submit” button to save your setting.
Crestron :...

86
Before Use
86
Network Control Software Application 
ITEM SETTINGDESCRIPTION
PowerPower On or Power Off the projector via network.
Vol + (Volume +)Adjust the volume up.
Vol + (Volume -)Adjust the volume down.
MuteMute the volume OFF / ON.
Source ListSelect input source.RGB1RGB2HDMI/DVIVIDEOS-VIDEOUSB
BrightnessAdjust the image brightness level.
ContrastAdjust the image contrast level.
ColorAdjust the strength of whole color.This  function  can  only  be  used  under  Video  signal,  S-Video  signal,...

87
Before Use 
87
Network Control Software Application
1. Click  button to leave this page. 2.Crestron Control
Projector Name :
Displays the projector name used to identify the projector when connecte\
d to a network.
When editing, you can enter up to 14 single-byte alphanumeric characters\
.
Location : 
Show  the  location  where  the  projector  is. When  editing,  you  can  enter  up  to  14  single-
byte alphanumeric characters.
Assigned To :
Displays  the  name  used  to  identify  the  projector...

88
Before Use
88
Network Control Software Application 
About the “Info” button :   Show current projector status from this page. Press exit button to lea\
ve this page.
Click  button to leave this page. 
About the “Contact IT Help”  : 
Click  to close Contact IT Help window dialog.
Click   to send the message to Crestron’s device and projector.
Logout : logging out of the projector network control.