Eiki Projector Lc Wnb3000n User Manual

59
Menu Operation
How To Operate On-Screen Display
1.  You could press "Menu" button. It will be shown blue main menu. The 
first main menu is " PICTURE" menu.
2.  Choose which item you want to enter, you could press up / down /left/ 
right button of control panel or remote control to adjust item or value.\
Up / Down / Right / Left button
Menu button
007 

60
MENU (PC Mode)
Picture Menu
Step:
1. Use the ▲ /▼ buttons to 
select an item.
2. Use the ◄ / ► cursor 
buttons to select an item or 
adjust the value.
ItemSelectionDescription
BRIGHTNESS000/100Adjust the image brightness level.
CONTRAST000/100Adjust the image contrast level.
SHARPNESS000/015Adjusts the image sharpness.
DISPLAY MODE
NATURALNatural color.
CINEMAEnhance contrast ratio when displaying DVD contents.
DAYLIGHTSuitable when ambient light is strong.
GREEN BOARD
WHITE BOARD
BLACK BOARD
Adjust...

61
MENU (PC Mode)
Audio Menu
Step:
1. Use the ▲ /▼ buttons to 
select an item.
2. Use the ◄ / ► buttons 
to select an item or adjust 
the value.
ItemSelectionDescription
VOLUME00/40Adjust the volume.
MUTEOFF/ONMute the volume OFF / ON. 

62
MENU (PC Mode)
Setting Menu
Step:
1. Use the ▲ /▼buttons to 
select an item.
2. Use the ◄ / ► buttons 
to select an item or adjust 
the value.
ItemSelectionDescription
H POSITION000/100Move the image position horizontally.
This function is only selected for computer signal.
V POSITION000/100Move the image position vertically.
This function is only selected for computer signal.
PHASE000/100Adjust the image sharpness.
FREQUENCY000/200Set the horizontal scanning frequency.
AUTO
KEYSTONEOFF/ONCorrect...

63
MENU (Video Mode)
Picture Menu
Step:
1. Use the ▲ /▼ buttons to 
select an item.
2. Use the ◄ / ► cursor 
buttons to select an item or 
adjust the value.
ItemSelectionDescription
BRIGHTNESS000/100Adjust the image brightness level.
CONTRAST000/100Adjust the image contrast level.
SHARPNESS000/015Adjusts the image sharpness.
COLOR000/100
Adjust the strength of whole color.
This function can be used under video signal, S-Video 
signal, or component video signal input only. 
TINT000/100
Adjust the image...

64
MENU (Video Mode)
Audio Menu
Step:
1. Use the ▲ /▼ buttons to 
select an item.
2. Use the ◄ / ► buttons 
to select an item or 
adjust the value.
ItemSelectionDescription
VOLUME00/40Adjust the volume.
MUTEOFF/ONMute the volume OFF / ON. 

65
MENU (Video Mode)
Setting Menu
Step:
1. Use the ▲ /▼buttons to 
select an item.
2. Use the ◄ / ► buttons 
to select an item or 
adjust the value.
ItemSelectionDescription
AUTO KEYSTONEOFF/ONAutomatically Correct keystone distortion in image.
V KEYSTONE -70/+70Correct vertical keystone distortion in image manually.
AUTO SEARCHOFF/ONSearch signal source manually or automatically. 

66
MENU
Advanced Menu
Step:
1. Use the ▲ /▼buttons 
to select an item.
2. Use the ◄ / ► buttons 
to select an item or 
adjust the value.
ItemSelectionDescription
ZOOM / PANEXECUTEExecute digital zoom and pan function.
FREEZEOFF/ONFreeze the current image on the screen.
BLANKOFF/ONHide the image, display a black screen.
BLANK POWER
OFF
15/30/60 
MinuteSet power off time after blank.
RESETEXECUTEReset all menu function to their factory default values.
RESIZE 4:3,16:9 16:10,1:1
LANGUAGEENGLISH
Select the...

67
MENU
SELECT SOURCEEXECUTE
Select the input source item, it will show the sub-items on 
the screen.
Use the ▲ / ▼ buttons to change input source item. And use 
►button to select input source
.
RGB2 I/O could be turned into one of analog RGB IN 2 
input source or output the projected from MONITOR OUT 
to an external monitor by RGB 1 source.
LOGO SETTINGEXECUTE
Customize the start-up logo.
IMPORTANT:
To implement Logo setting function, please enter PIN code 
first. Without inputting the PIN code, you...

68
MENU
Advanced Menu
LOGO SETTING
This function allows you 
to customize the start-up 
logo.
IMPORTANT:
To implement Logo 
setting function, please 
enter PIN code first. 
Without inputting the PIN 
code, you cannot modify 
Logo setting function. 
ItemSelectionDescription
LOGO MODE
DEFAULT
USER
OFF
Select Mode( ► cursor button)
The factory logo.
The image you captured.
The blank image. You can select color with background 
function.
LOGO
CAPTUREEXECUTEStart to capture the image.(PC mode only)...