Eiki Projector Lc Wnb3000n User Manual

9
Part Names
9
8
7
3
4
52
1
6
Projector
1 Control panel
Operating system.
        Filter cover
Prevents dust and other foreign particles 
from being drawn into projector.
Remove the filter cover to clean the air 
filter.
  Foot adjust button
Lock / unlock the adjustable foot.
 Front adjustable foot
Extend and retract to adjust the projection 
angle.
 Anti-dust glass
Dustproof function.
 Gate Plate
Dustproof function.
 Zoom ring
Use the zoom ring to adjust the size of the 
projected image.
Rotate the zoom...

10
Part Names
Control Panel
10
1111
12
1318 17
151416LAMP INDICATORPOWER INDICATOR
11 0 KEYSTONE
Adjust the vertical keystone. 
1 1 VOLUME + / -
Sound louder or lower.
11 2 INPUT
Select input source:
Note : 
If the projector can not be captured the 
signals within 15 minutes, it will be shut 
down automatically.
11 3 BLANK
Blank the projected image. The time of 
Blank mode can be set in 15 minutes, 30 
minutes or 60 minutes. The projector will 
shut down automatically after passing each 
set time.
11 4...

11
Part Names
Rear
A RS-232C
Serial data port for controlling the projector with 
a computer or other RS-232 control device.
B  
AUDIO IN 1 & N AUDIO IN 2
Mini jack port corresponds to computer input. (RGB IN 1→AUDIO IN 1, RGB IN 2→AUDIO 
IN 2)
C RGB IN 1
Input analog RGB signal from a computer.
D HDMI
Input digital HDMI signal from a Computer & 
Video source.
E USB Port (USB-A Type)
1. Supports USB Storage Device and USB compatible hard disks.2. Supports wireless (WiFi) USB dongle for 
wirelessly...

12
Setting Up
When in against at wall, leave about 20cm (7.9in.) between the project\
or and the wall.
8.74~10.52
5.80~7.00
4.33~5.24
2.87~3.48
2.28~2.77
1.69~2.07
1.10~1.36
5‘
5’
Distance(M)
Image size(inch)8.74~10.52
5.80~7.00
4.33~5.24
2.87~3.48
2.28~2.77
1.69~2.07
1.10~1.36
5‘ 5’
Image size(inch)
Distance(M)
Arrangement
1. 
Before installation, make sure that the projector is turned off and the power cord is disconnected.
2. Do not set up and move the projector, while it is hot.
3.   The distance...

13
Setting Up
1.18~1.461.81~2.21
2.44~2.96 3.06~3.714.63~5.6
6.2~7.48 9.34~11.24
5‘ 5’1.18~1.461.81~2.21
2.44~2.96
3.06~3.71 4.63~5.66.2~7.489.34~11.245‘
5’
When in against at wall, leave about 20cm (7.9in.) between the project\
or and the wall.
Distance(M)
Image size(inch)
Image size(inch)
Distance(M)
LC-WNB3000 (16:10)
Screen size (diagonal))Distance (m)Distance (feet)
inchmTeleWideTeleWide
401.01.461.184.783.88
601.52.211.817.255.94
701.82.592.128.486.96
802.02.962.449.727.99
1002.53.713.0612.1810.05...

14
Setting Up
Power ON / OFF
Turning On The Power
1.  Make sure that power cord is firmly and 
correctly connected to the projector.
2. The green Power indicator blinks slowly.
3. Remove the lens cover. 
4.  Press POWER button on the control panel or 
the remote control to turn on the projector.
5.  Rotate the zoom ring to adjust the screen size.
6. Rotate the focus ring to adjust the focus.
Turning Off The Power
1.  Press the POWER button on the control 
panel or the remote control. The "power...

15
Setting Up
Setting Up The Projector
The projector supports the following four different projection methods. 
1. Front projection
2. Rear projection
3. Rear ceiling projection
4. Front ceiling projection
Special installation is required in order to suspend the projector from \
the ceiling. Please ask your 
dealer for details. 
0˚180˚
270˚ 90˚The projector can be installed pitched by any 
angle (360 degree) without any setting in fan 
mode. As for rolling it must be within 10 degree. 

16
Setting Up
Ceiling Mounted Installation Guide 
Attach ceiling mount at four-suspension bracket fixing points when suspending from a ceiling. 
Special installation is required in order to suspend the projector from \
the ceiling. Please ask your 
dealer for detals.
Security Anchor
The product is equipped with security 
anchor and PIN LOCK functions to help 
prevent unauthorized removal projector.
MAX M4x8 mm For Mounting.
 WARNING
►Do not grasp the security anchor to carry projector, since it is not...

17
Setting Up
Adjusting The Projector’s Elevation
Use the adjustable foot at the front of the projector to set the image h\
eight.
1   Holding the projector, push the foot adjust 
buttons to loosen the front adjustable foot.
12   Position the front side of the projector to the 
desired height.
3   Release the foot adjust buttons in order to 
lock the front adjustable feet.
14   Please make sure that the front adjustable 
feet are locked.
15   Please rotate the adjustable feet when fine 
adjustment of...

18
Setting Up
How To Connect
Laptop or desktop computer
Before starting, make sure that the projector and computer are both turn\
ed off.
Connect the computer
Connect the computer cable from the computer to the projector's RGB IN.
Connect a computer cable from the MONITOR OUT to an external monitor to view the 
signal on RGB IN. Tighten the screw on all connectors.
Connect the audio 
1.  Please connect the audio cable to the AUDIO IN 1 if the computer cable connected to 
the projector's RGB IN....