Eiki Projector Lc Wnb3000n User Manual

							79
Network Control Software Application
 
ADMINISTRATOR MODE
User name: admin
Password:  (Default password  setting is 
disabled.)
 
Home (Status):Show current projector status and network configuration settings. 
						

							80
Network Control Software Application
ITEMITEM SETTINGDESCRIPTION
StatusProjector NameShow projector name.
System StatusShow if projector is Power On or Inactive .
Input SourceShow current input source.
Lamp HoursShow lamp used hours on current projector.
Filter HoursShow filter used hours on current projector.
Wired LANIP AddressShow current IP address of wired LAN.
Subnet MaskShow current Subnet Mask of wired LAN.
GatewayShow current Gateway of wired LAN.
MAC AddressShow current MAC Address of wired LAN.
Wireless LANModeAccess Point Mode.
SSIDSSID  (Service  Set  Identification)  is  the  wireless  network  name, it must be assigned to wireless devices in your network.
ChannelThis  field  determines  which  operating  frequency  will  be  used. The  default  channel  is  set  to Auto,  so  the AP  will  choose  the best channel automatically.
IP AddressShow current IP address of Wireless LAN.
Subnet MaskShow current Subnet Mask of Wireless LAN.
GatewayShow current Gateway of Wireless LAN.
MAC AddressShow current MAC Address of Wireless LAN.
Download ToolWindowsTo  download  the  application  program  of  EZ  WiFi_LAN.        The file is Windows OS only for EZ Display used.
MACTo  download  the  application  program  of  EZ  WiFi_LAN.        The file is MAC OS only for EZ Display used.
Control Panel:Select projector’s detailed setting from this page. 
						

							81
Network Control Software Application
ITEM SETTINGDESCRIPTIONBasicProjector NameShow projector name on the current projector.
PowerPower On or Power Off the projector via network.Input SourceSelect input source.PictureBrightnessAdjust the image brightness level.ContrastAdjust the image contrast level.SharpnessAdjust the image sharpness.ColorAdjust the strength of whole color.This  function  can  only  be  used  under  Video  signal,  S-Video  signal,  or  component video signal input.TintAdjust the image tint.This function can be used under Video signal, S-Video signal, or component video signal.Display ModeAdjust Natural/Cinema/Daylight/Green Board/White Board/Black/User Mode.AudioVolumeAdjust the volume.MuteMute the volume OFF / ON.SettingKeystone Manually correct vertical keystone distortion in image.Auto SyncSet all of the above setting automatically. (This function can only be used under PC mode)Auto SearchSearch signal source manually or automatically.AdvancedBlankBlank the current image on the screenBlank Power OffNo / 15 / 30 / 60 (minutes)FreezeFreeze the current image on the screen.Resize 4:3,16:9, 1:1, 16:10Reset AllReset all menu function to their factory default values.PresentationProjectionSelect Front/Ceiling/Rear/Celing and RearLamp ModeSwitch lamp mode between Powerful or Normal mode. 
						

							82
Network Control Software Application
Network :Set up network configuration and password from this page.
ITEM SETTINGDESCRIPTION
Network
DHCPAssign an IP address to the projector from the DHCP server automatically.
IP AddressSet up IP Address when DHCP is disabled.
Subnet MaskSet up Subnet Mask when DHCP is disabled.
GatewaySet up Gateway when DHCP is disabled.
DNS ServerSet up DNS Server address when DHCP is disabled.
Group NameCreate projector group. (Max length: 14 characters)
Projector NameCreate projector naming of the current projector. (Max length: 14 characters)
Password
AdministratorTurn  ON/OFF  administrative  password  function.Administrator  mode  can control the conditions on web.
New PasswordEnter administrative password.(Max length: 15 characters)
Confirm PasswordRe-enter administrative password. 
						

							83
Network Control Software Application
Alert:Show and setup Alert configurations.
When problem occurs to the projector, it will automatically send e-mail to remind user.
How to opearte:
1. Enter Email Setting columns.
2. Enter SMTP Setting columns.
3. Select Alert Condition. Multiple choices are fine.
4. Press Submit to confirm.
5.  
After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to 
see if the attendees can receive the e-mail.  If the attendees cannot receive the e-mail, please check if 
the setting is correct or not.  If you have questions with the Alert Setting, please contact your network 
service provider.
ITEM SETTINGDESCRIPTIONEmail SettingToSet up the mail alert attendee. (Max length: 40 characters)CcSet up the backup mail alert attendee. (Max length: 40 characters)SubjectSet up the subject of the alert e-mail. (Max length: 40 characters)FromSet up the sender e-mail address. (Max length: 40 characters)SMTP SettingServerTo  enter  the  SMTP  server  (Mail  server)  name  of  the  company  or  IP address.(Max length: 40 characters)User NameEnter the sender’s e-mail address. (Max length: 40 characters)For example: [email protected] password of the sender’s e-mail account. (Max length: 15 characters)Alert ConditionFan LockThe cooling fan is not operating.Over TemperatureThe projector internal is over heated.Lamp failThe lamp does not light up.
Lamp Time Alert Lamp has reached its life time. Suggest changing the lamp.Lamp Cover OpenedLamp Cover does not close well.Filter Time AlertFilter has reached its life time. Suggest cleaning the filter. 
						

							84
Network Control Software Application
Schedule :Show and set up Schedule, including Weekly Schedule and Specific Day.
Weekly Schedule
To power on and power off projector based on Weekly Schedule.
How to set up:
1. Choose week days.2. Set up power-on or power-off time.    ( Please be sure that the interval between power-on and off setting is more than 5 minutes.)3. Enter Input Source and select input source.4. After completing setting, press ADD to confirm.5. To cancel items, select the item and press "Cancel" button.
Specific Day
Based on Specific Day to set up power-on and power-off time.
How to set up:
1. Choose power-on days and time.2. Choose power-off days and time.    ( Please be sure the setting period between power-on time and off time is greater than 5 minutes.)3. Enter Input Source and select input source.4. After completing setting, press ADD to confirm.5. To cancel items, select the item and press "Cancel" button. 
						

							85
Before Use 
85
Network Control Software Application
Time :
1. Current System Time Setting : Refresh the date/time on the webpage if you click   
                                                      “Refresh” bu\
tton.
2.System Time Setting : To set the date/time manually
                                        Enter the Date in Month/Day/Year format. 
                                        Enter the Time in Hour/Minute/Second format. 
3. Click the “Submit” button to save your setting.
Crestron : Projector's detailed setting from Crestron. 
						

							86
Before Use
86
Network Control Software Application 
ITEM SETTINGDESCRIPTION
PowerPower On or Power Off the projector via network.
Vol + (Volume +)Adjust the volume up.
Vol + (Volume -)Adjust the volume down.
MuteMute the volume OFF / ON.
Source ListSelect input source.RGB1RGB2HDMI/DVIVIDEOS-VIDEOUSB
BrightnessAdjust the image brightness level.
ContrastAdjust the image contrast level.
ColorAdjust the strength of whole color.This  function  can  only  be  used  under  Video  signal,  S-Video  signal,  or component video signal input.
SharpnessAdjust the image sharpness.
ZOOMZoom in/Zoom out and Pan.
MenuDisplay or hide the OSD main menu.
UP/Down buttonsUse UP/Down buttons to select an items.
Left/Right buttonsUse left/right buttons to select an items or adjust the value.
SourceRGB1->RGB2->HDMI->USB->Video->S-Video->RGB1.
EnterUse Enter buttons to select an item.
AutoAutomatically adjust the setting to match the current input.
BlankBlank the projected image. The time of Blank mode can be set in 15 minutes, 30  minutes  or  60  minutes.  The  projector  will  shut  down  automatically  after passing each set time.
About the Tools button :     Set  up  network  configuration,  projector  network  web  browser  login  password  and  set  projector  name 
from this page. 
						

							87
Before Use 
87
Network Control Software Application
1. Click  button to leave this page. 2.Crestron Control
Projector Name :
Displays the projector name used to identify the projector when connecte\
d to a network.
When editing, you can enter up to 14 single-byte alphanumeric characters\
.
Location : 
Show  the  location  where  the  projector  is. When  editing,  you  can  enter  up  to  14  single-
byte alphanumeric characters.
Assigned To :
Displays  the  name  used  to  identify  the  projector  is  assigned  to  someone  who  can 
manage a network.
When editing, you can enter up to 14 single-byte alphanumeric characters\
.
Click   button to send and save the setting that you modify.
Projector’s Network Configuration
DHCP EnabledA s s i g n   a n   I P  a d d r e s s   t o   t h e   p r o j e c t o r   f r o m   t h e   D H C P  s e r v e r 
automatically.
IP AddressSet up IP Address when DHCP is disabled.
Subnet MaskSet up Subnet Mask when DHCP is disabled.
GatewaySet up Gateway when DHCP is disabled.
DNS ServerSet up DNS Server address when DHCP is disabled.
Click   button to send and save the setting that you modify.
Admin Password
EnabledTurn ON administrative password function if selected.
New PasswordEnter administrative password. (Max length: 15 characters).
Confirm 
Password
Re-enter administrative password.
Click   button to send and save the setting that you modify.
User Password
EnabledTurn ON User password function if selected.
New PasswordEnter administrative password. (Max length: 15 characters).
Confirm 
Password
Re-enter administrative password.
Click   button to send and save the setting that you modify. 
						

							88
Before Use
88
Network Control Software Application 
About the “Info” button :   Show current projector status from this page. Press exit button to lea\
ve this page.
Click  button to leave this page. 
About the “Contact IT Help”  : 
Click  to close Contact IT Help window dialog.
Click   to send the message to Crestron’s device and projector.
Logout : logging out of the projector network control.