Eiki Projector Lc Wnb3000n User Manual

							49
EZ Suite(Setting&Configuration)
3.3 Photo Setting    
►Note :
1. Display ratio
    Original: Projected the image of original size.
    Full Screen : Change the aspect ratio to be displayed at full screen size.
2. SlideShow 
    OFF : Turns SlideShow function off.
    ON : Turns SlideShow function on.
3. Slidesshow Duration: Set the Photo Slideshow duration time as 10 seconds, 30 seconds 
                                          or 1 minutes.
3.4 Audio Setting
►Note:
Repeat mode
Signal : Play the selected audio file once.
Sequence : To play the playlist in sequence. 
						

							50
EZ Suite(Setting&Configuration)
3.5 WiFi Setting    
Please plug in the WIFI USB Dongle first; otherwise the projector would examine and 
project “No device” message on the screen.
There are AP mode, Client mode at the WiFi setting. 
						

							51
EZ Suite(Setting&Configuration)
AP mode(Ad Hoc) :    
Select the  button, then press the ENTER button on the remote control to go to set 
some parameters for being enabled under AP mode.
► These settings are only for basic wireless parameters. If you are going \
to modify these 
wireless parameters, the visual keyboard will pop-up on the screen. Pres\
s the   
, ,  or  buttons to select a character on the visual keyboard, and press the 
ENTER button to keyin the character. Press ESC button to quit the setting, it can help 
you to configure your setting. 
						

							52
EZ Suite(Setting&Configuration)
SSID (Service Set Identification) : The same name of SSID must be assigned to wireless 
                                                           devices in yo\
ur network. Considering your wireless 
                                                           network secur\
ity, the default SSID is set to be “rtwap”.
Security : you can configure the security settings of your wireless network.
                 There are three wireless security modes supported by the Router : Open, \
WPA2 
                 and WPA.
                 Open – it means no security settings of this wireles\
s network. 
                 The default setting is automatic that based on the wireless station's ca\
pability 
                 and request.
                 WPA(default) and WPA2 – It’s the WPA/WPA2 authentication type.
PSK (Pass-Key) : You can enter a key-code.  
Channel : This field determines which operating frequency will be used. It is not 
                  necessary to change the wireless channel unless you no\
tice interference 
                  problems with another nearby access point.
Auto : The default setting is automatic, which can adjust the channel width for\
 your 
            clients automatically.
V : press the ENTER button to enable AP mode, and then press the ESC button on the 
      remote control to quit AP mode setting page. 
X : abort the setting, or you can press the ESC button on the remote control\
 to quit setting. 
						

							53
EZ Suite(Setting&Configuration)
Client mode :    
When wireless clients survey the local area for wireless networks to ass\
ociate with, they 
will detect the SSID broadcast by the Router. The SSID of the AP your Router is going to 
connect to as a client.
Select the  button and press ENTER button on the remote control for starting Client 
mode.
Press the  button on the remote control to go to the items of SSID. The visual 
keyboard will pop-up on the screen if select a SSID name and ask you PSK\
(pass-key) for 
connecting. Press the  , ,  or  ENTER buttons on the visual keyboard to 
key-in the PSK entry that should be chosen according to the AP's security configuration. 
						

							54
EZ Suite(Setting&Configuration)
Press the  to connect to as a client. 
						

							55
EZ Suite(Setting&Configuration)
Connect successfully.
Select the , then press the ENTER button on the remote control to detect the SSID 
broadcast with the Router again. 
						

							56
EZ Suite(Setting&Configuration)
EZ Display :
Main functions : 
- View MS-Office files(Word, Excel, PowerPoint), Adobe PDF,
   Apple iWorks(Pages, Numbers, Keynote),
   and it also supports Sketch function and save to photo roll.
- View local photo gallery and do sketch
- Display Web pages and support sketch function as well
- Link your Dropbox storage and view the documents stored on it.
1.Open App store to download the app which is EZ display.
2.Configuring the Projector's Wi-Fi:
EZ Display can support AP mode and Client mode.
AP mode :
Set the AP mode parameters at  \..\settings\WiFi\AP mode\. 
See ‘WiFi settings’ (Page50) for more information to set parameters.
Connects directly to a projector. 
						

							57
EZ Suite(Setting&Configuration)
Client mode :
Set the client mode parameters at  \..\settings\WiFi\Client mode\. 
See ‘WiFi settings’ (Page52) for more information to set parameters.   
Connects through a wireless LAN router..
►Note :
Compatible Devices :  
ApplicationCompatible OS version
EZ display- iOS 5.1.1 or later 
- Android 4.0 or above. 
						

							58
MENU (PC Mode)
3.6 Connect PC Setting
Connect PC for accessing internal memory.
1.Connect the computer's USB port to the projector's USB (mini-USB) po\
rt via the 
     USB cable.
2.Computer’s system will examines newly discovered removable media and devices.
3.Projector will display the connecting message on the screen.
4. Click and execute"Open folder to view files",it can access the internal memory from 
    projector.
Remove connecting Internal Memory. 
Press the “ESC” button on the remote control to exit communication\
 process with 
computer, and then remove mini-USB cable from the projector and computer.
58
EZ Suite(Setting&Configuration)