Eiki Projector Lc Wb42na User Manual

21

The preparation display will disappear 
after 30 seconds.
(See page 58 for Lamp control status.)
Turning	On	the	Projector
Connect the projector’s AC power cord into an AC 
outlet. The POWER indicator lights red. Open the slide 
shutter  (see pages 9, 66).
Press the ON/SYAND-BY button on the top control or 
on the remote control. The POWER indicator lights 
green and the cooling fans start to operate. The 
preparation display appears on the screen and the 
count down starts. 
2
3
1
4After the...

22

What	is	PIN	code?
PIN (Personal Identification Number) code is a security 
code that allows the person who knows it to operate the 
projector. Setting a PIN code prevents unauthorized use of 
the projector.
A PIN code consists of a four-digit number. Refer to the PIN 
code lock function in the Setting Menu on pages 59-60 for 
locking operation of the projector with your PIN code.
Enter	a	PIN	code
Use the Point ▲▼ buttons to enter a number. Press the 
Point ► button to fix the number and move the red...

23

TO MAINTAIN THE LIFE OF THE LAMP, ONCE 
YOU TURN THE PROJECTOR ON, WAIT AT 
LEAST FIVE MINUTES BEFORE TURNING IT 
OFF.
Power	off? disappears after 4 seconds.
Turning	Off	the	Projector
Press the ON/STAND-BY button on the top control or 
on the remote control, and Power	off? appears on the 
screen.
Press the ON/STAND-BY button again to turn off the 
projector. The POWER indicator starts to blink red, and 
the cooling fans keep running (You can select the level 
of fans’ quietness and speed. See...

24

Basic	OperationHow	to	Operate	the	On-Screen	Menu
The projector can be adjusted or set via the On-Screen 
Menu. The menus have a hierarchical structure, with 
a main menu that is divided into submenus, which are 
further divided into other submenus. For each adjustment 
and setting procedure, refer to respective sections in this 
manual.
Use the Point ▲▼ buttons to highlight or select a main 
menu item. Press the Point ►or the SELECT button 
to access the submenu items. (The selected item is...

25

Menu	Bar
For detailed functions of each menu, see “Menu Tree” on pages 73-74.
Basic	Operation








Main MenuSub-Menu


 Image	select
 For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboard 
and 	image	1	-	4 (p.36). 
      For HDMI or Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green)	, 
Colorboard	
and  Image	1-	4 (p.43).
 
Image	adjust
  For computer source, used to adjust computer...

26

Basic	Operation
Rotate the Zoom  Lever to zoom in and out.  
Rotate the Focus Ring to adjust the focus of the image.  
Zoom	and	Focus	Adjustment
If a projected picture still has keystone distortion after 
pressing the AUTO SETUP/CANCEL button on the top 
control or the AUTO SET/CANCEL button on the remote 
control, correct the image manually as follows:
Press the KEYSTONE button on the remote control. The 
Keystone dialog box appears. Use the Point ▲▼ buttons to 
correct keystone distortion. The...

27

Sound	Adjustment
1
2
Press the MENU button to display the On-Screen Menu. 
Use the Point ▲▼ buttons to select Sound. Press the 
Point ► or the SELECT button to access the submenu 
items. 
Press the VOLUME+/– buttons on the top control or on the 
remote control to adjust the volume. The volume dialog box 
appears on the screen for a few seconds.
Press the MUTE button on the remote control to select On 
to temporarily turn off the sound. To turn the sound back 
on, press the MUTE button again to...

28

Basic	OperationRemote	Control	Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons 
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the HDMI, COMPUTER, VIDEO or NETWORK button 
on the remote control to select the input source. See pages 
30-31, 40-41 for details.
Refer to the owner’s manual of “Network Set-up and 
Operation” for details about the network input.
HDMI/COMPUTER/VIDEO/NETWORK...

29

Basic	Operation
black out → the captured image → normal → • • • • •
Press the NO SHOW button on the remote control to black out 
the image. To restore to normal, press the NO SHOW button 
again or press any other button. When a projected image is 
captured and set as User in the Logo selection (see page 50), 
the screen changes each time you press the NO SHOW button 
as follows.
NO	SHOW	button
Press the P-TIMER button on the remote control. The P-Timer 
display 00:00 appears on the screen and the...

30

Choose Computer	1	by pressing the INPUT button on the top control or press the COMPUTER button on the 
remote control. 
Before using these buttons, correct input source should be selected through Menu operation as described 
below.
1
Input	Menu
2
3
Input	Source	Selection	(Computer	1:	RGB	/	Component	/	RGB(Scart)	)
Computer	Input	
Note:
   When the Input Search function is set to 	On1 or On2 in 
the Auto setup function, the input signal will be searched 
automatically (p.48).
Computer	1
Top...