Eiki Projector Lc Wb42na User Manual

	 Network	Supported	
□ Wireless LAN
   IEEE802.11b/g/n
□ Wired LAN
   100-Base-TX/10-Base-T
	 Memory	Viewer	
□  USB Memory Viewer 
 
* Refer to the owner’s manuals below for details 
about network and memory viewer function.
   ■   Network Set-up and Operation
   ■   Memory viewer function
Multimedia	ProjectorOwner's	Manual
LC-WB42NAMODEL 

2

Features	and	Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. 
This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display 
(LCD) technology.
♦	Compact	Design
 This projector is designed compact in size and weight. 
It is easy to carry and installed anywhere you wish to 
use.
♦	Capable	of	360-degree	Projection
 This projector is capable of 360-degree projection....

3

Table	of	Contents
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its  respective 
corporation.
Features	and	Design	 .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Table	of	Contents  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
3
To	the	Owner  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
4
Safety	Instructions  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  ....

4

To	the	Owner
CAUTION:	 TO	REDUCE	THE	RISK	OF	ELECTRIC	SHOCK,	DO	NOT	REMOVE	COVER	(OR	
BACK) .	NO	USER-SERVICEABLE	PARTS	
INSIDE	EXCEPT	LAMP 	REPLACEMENT .	
REFER	SERVICING	TO	QUALIFIED	
SERVICE	PERSONNEL .
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.
CAUTION
RISK	OF	ELECTRIC	SHOCK DO	NOT	OPEN
Before...

5

Safety	Instructions
All  the  safety  and  operating  instructions  should  be  read 
before the product is operated.
Read all of the instructions given here and retain them 
for later use. Unplug this projector from AC power supply 
before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the 
projector.
For added protection to the projector during a lightning 
storm, or when it is left unattended and unused for long...

6

Safety	Instructions
Openings  in  the  cabinet  are  provided  for  ventilation.  To 
ensure  reliable  operation  of  the  product  and  to  protect  it 
from  overheating,  these  openings  must  not  be  blocked 
or covered. 
 CAUTION
Hot  air  is  exhausted  from  the  exhaust  vent.  When  using 
or  installing  the  projector,  the  following  precautions 
should be taken. 
– Do not put any flammable object or spray can near the 
projector, hot air is exhausted from the air vents.
–  Keep the...

7

Safety	Instructions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe 
accident or fire hazard.
This projector can project the picture upward, downward or backward, perpendicular to the plane of the screen as 
shown in the figure below.
Bottom	
Downward
(Usual)
Front	
Downward
Bottom	
Upward
Front	
Upward
Installing	the	Projector	in	Proper	Directions
Avoid positioning the projector as described below when installing.
Positioning...

8

Compliance
Federal	Communications	Commission	Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful 
interference  in  a  residential  installation.  This  equipment  generates,  uses,  and  can  radiate  radio  frequency 
energy,  and  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause...

9

Part	Names	and	Functions
Bottom
Back
⑯
⑮⑭⑬⑪⑫
⑰
⑨
⑩
⑪
⑱
 Kensington	Security	Slot
 This slot is for a Kensington lock used to deter theft of the projector. *  Kensington is a registered trademark of ACCO Brands Corporation.
① Infrared	Remote	Receiver
②	 WIRELESS	Indicator
③  Focus	Ring	
④  Projection	Lens 　
⑤	Zoom	Lever
⑥  Slide	Shutter
⑦	 Top	Controls	and	Indicators
⑧	Air	Intake	Vent
⑨	 Exhaust	vent	
⑩	Speaker
⑪		 Air	Intake	Vent	(back	and	bottom)
⑫		 Terminals	and	Connectors
⑬		Power	Cord...

10

Part	Names	and	Functions
Rear	Terminal	
⑨ S-VIDEO	IN
  Connect the S-VIDEO output signal from video 
equipment to this jack (p.18).
⑫ AUDIO	IN
  Connect the audio output signal from video 
equipment connected to ⑨ or ⑬ to this jack. 
For a mono audio signal (a single audio jack), 
connect it to the L (MONO) jack (p.18).
⑪ COMPUTER	 1	COMPONENT	 /	COMPUTER	 2	
AUDIO	IN
  Connect the audio output (stereo) from a 
computer or video equipment connected to ④, 
⑤ or ⑥ to this jack. (pp17, 19)
⑬ VIDEO	IN...