Eiki Projector EIP-UJT100 User Manual
Have a look at the manual Eiki Projector EIP-UJT100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
66
Projector Control via LAN
The projector supports to control the projector through the network. Before using this
function, please set up the network configuration of your personal computer .
1. Set up network configuration.
The default IP address of the projector is 192.168.0.100, please follow below steps to\
set the network configuration.
Connect RJ-45 cable from PC to the LAN connector on the projector.
HDMI IN VGA ING/YB/Pb R/Pr DVI-D IN
H V
RS-232C
1
2R/C IN
12V Trigger OUT
YPb Pr INOUT...](http://img.usermanuals.tech/thumb/1702/99974/w64_projector_manual_8841_d-65.png "Page 66
66
Projector Control via LAN
The projector supports to control the projector through the network. Before using this
function, please set up the network configuration of your personal computer .
1. Set up network configuration.
The default IP address of the projector is 192.168.0.100, please follow below steps to\
set the network configuration.
Connect RJ-45 cable from PC to the LAN connector on the projector.
HDMI IN VGA ING/YB/Pb R/Pr DVI-D IN
H V
RS-232C
1
2R/C IN
12V Trigger OUT
YPb Pr INOUT...")
![Page 68
68
Using Projector Web Control
■ Source/General
Use this page to control the general settings of the projector such as p\
ower on/off,
source….etc.
Note:
If projector control option is selected to RS232, the web control will be interrupt. Network control has
to be enabled from the projector’s OSD menu before connecting to projector web control.
■ Image Setting
Click arrows to adjust the image settings such as Brightness, Sharpness…\
etc. on the
web page.](http://img.usermanuals.tech/thumb/1702/99974/w64_projector_manual_8841_d-67.png "Page 68
68
Using Projector Web Control
■ Source/General
Use this page to control the general settings of the projector such as p\
ower on/off,
source….etc.
Note:
If projector control option is selected to RS232, the web control will be interrupt. Network control has
to be enabled from the projector’s OSD menu before connecting to projector web control.
■ Image Setting
Click arrows to adjust the image settings such as Brightness, Sharpness…\
etc. on the
web page.")
![Page 69
69
■ Lens Adjustments
This page allows you to adjust Zoom, Focus and Lens shift. The operation is similar to
control the projector by the remote control or control panel on the proj\
ector, click arrows
to adjust the settings.
■ Geometry Adjust
Click the arrow buttons to adjust Blanking, Warp, Four Corner, and click the option
to select the aspect ratio setting. Click Reset option to reset Blanking\
or Warp to the
default setting.](http://img.usermanuals.tech/thumb/1702/99974/w64_projector_manual_8841_d-68.png "Page 69
69
■ Lens Adjustments
This page allows you to adjust Zoom, Focus and Lens shift. The operation is similar to
control the projector by the remote control or control panel on the proj\
ector, click arrows
to adjust the settings.
■ Geometry Adjust
Click the arrow buttons to adjust Blanking, Warp, Four Corner, and click the option
to select the aspect ratio setting. Click Reset option to reset Blanking\
or Warp to the
default setting.")
![Page 70
70
■ Edge Blend
Click Status option to enable or disable Edge Blend function. When Edge \
Blend is
disabled, the other options are unavailable and N/A is shown on the column. The other
options are available only when Edge Blend is enabled.
■ Advance Control
This page allows you to select color temperature or adjust black balance\
or white
balance. Click the option to select Color Temp. or arrow button to adjust the setting.](http://img.usermanuals.tech/thumb/1702/99974/w64_projector_manual_8841_d-69.png "Page 70
70
■ Edge Blend
Click Status option to enable or disable Edge Blend function. When Edge \
Blend is
disabled, the other options are unavailable and N/A is shown on the column. The other
options are available only when Edge Blend is enabled.
■ Advance Control
This page allows you to select color temperature or adjust black balance\
or white
balance. Click the option to select Color Temp. or arrow button to adjust the setting.")
![Page 72
72
■ About
This page shows the product, input source, lamp, installation informatio\
n…etc
■ Remote Emulator
Operate the projector with the remote control illustrated in the browser\
as actual one.](http://img.usermanuals.tech/thumb/1702/99974/w64_projector_manual_8841_d-71.png "Page 72
72
■ About
This page shows the product, input source, lamp, installation informatio\
n…etc
■ Remote Emulator
Operate the projector with the remote control illustrated in the browser\
as actual one.")
71 ■ Configuration Use this page to modify the networking setting such as IP address, Subnet, Gateway and DHCP. Make sure the IP address of the projector and PC are in the same network group. For example, 192.168.0.X. Whereas X must contain a different value. If the network provides DHCP service, you can enable DHCP client. IP Address, Subnet, and Gateway will be assigned by DHCP service. Please contact with your network administration for more details. ■ Diagnostics Advance Diagnostics This page is to diagnose the projector. Okay is displayed under normal condition. Error code is displayed if there is an error in the projector. If any abnormal code, please contact with the service center.
72 ■ About This page shows the product, input source, lamp, installation informatio\ n…etc ■ Remote Emulator Operate the projector with the remote control illustrated in the browser\ as actual one.
73 Configurations of Terminals ■ Analog (Mini D-sub 15 pin) 1514131211 910876 54321 Input 1 Red Input 9P5V 2 Green Input 10GND 3 Blue Input 11GND 4 N.C 12VGA_SDA 5 N.C 13H-Sync 6 GND 14V-Sync 7 GND 15VGA_SCL 8 GND 16GND ■ HDMI(19 pin Type A) 135791113151719 24681012141618 1 T.M.D.S. Data 2+ Input 11Ground 2 Ground 12T.M.D.S. Clock C- Input 3 T.M.D.S. Data 2- Input 13CEC 4 T.M.D.S. Data 1+ Input 14N.C 5 Ground 15SCL 6 T.M.D.S. Data 1- Input 16SDA 7 T.M.D.S. Data 0+ Input 17Ground 8 Ground 18P5V 9 T.M.D.S. Data 0- Input 19HPD 10 T.M.D.S. Clock C+ Input ■ DVI-D 910111213141516 1819202122232417 12345678 1 T.M.D.S. Data 2- Input 13N.C 2 T.M.D.S. Data 2+ Input 14P5V 3 Ground 15Ground 4 N.C 16HPD 5 N.C 17T.M.D.S. Data 0- Input 6 SCL 18T.M.D.S. Data 0+ Input 7 SDA 19Ground 8 N.C 20N.C 9 T.M.D.S. Data 1- Input 21N.C 10 T.M.D.S. Data 1+ Input 22Ground 11 Ground 23T.M.D.S. Clock+ Input 12 N.C 24T.M.D.S. Clock- Input ■ CONTROL PORT – RS232 (D-sub 9 pin) 9876 54321 1 N.C 2 RXD 3 TXD 4 N.C 5 Ground 6 N.C 7 Short with pin8 8 Short with pin7 9 N.C
74 ■ LAN TERMINAL (RJ-45) / HDBaseT 8765432 1 1TX+ 2 TX- 3 TXC 4 Ground 5 Ground 6 RXC 7 RX+ 8 RX- ■ Screen Trigger TipSleeve Ring 1 Tip VCC(12V) 2 Sleeve- Ground 3 Ring Signal ■ Wired Remote TipSleeve Ring 1 Tip VCC(3.3V) 2 Sleeve- Ground 3 Ring Signal
EIKI (Shanghai) Co., Ltd. LAKESIDE OASIS MIDDLE RING BUSINESS CENTRE Block 1,Room 606, 1628, Jin Sha Jiang Road Shanghai, 200333, CHINA China Tel: +86 21-3251-3993 Service Hot line: +86 21-3251-3995 Fax: +86 21-3251-3997 E-mail: [email protected] U.S .A. EIKI International, Inc. 30251 Esperanza Rancho Santa M argarita CA 92688-2132, U .S .A . T el: +1 800-242-3454 +1 9 49-457-0200 Fax:+1 8 00-457-3454 +1 9 49-457-787 8 E-Mail : [email protected] Oceania EIKI AUSTRALIA PTY LTD Level 5, 11 Queens Road, Melbourne, Victoria 3004, Australia Tel: +61 03-8530-7048 Fax: +61 03-9820-5834 E-Mail: [email protected] Canada EIKI CANADA Eiki International, Inc. Canadian Branch P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel: +1 800-563-3454 +1 705-527-4084 Fax: +1 800-567-4069 +1 705-527-4087 E-Mail: [email protected] Japan & Worldwide EIKI Industrial Company Limited. 6-23 Teramoto, Itami-shi, Hyogo, 664-0026, Japan Tel: +81 72-782-7492 Fax: +81 72-781-5435 E astern Euro pe EIKI CZECH SPOL. s.r.o. Nad Cementárnou 1163/4a Praha 4, Podolí, 147 00 Czech Republic Tel: +420 241-410-928 +420 241-403-095 Fax: +420 241-409-435 E-Mail: [email protected] Deut schland & Ös terrei ch EIKI Deutschla nd GmbH A m F rauwald 12 6551 0 Idstein, Deutschland Tel: +49 6126-9371-0 Fax: +49 6126-9371-11 E-Mail: [email protected] Sout h East Asia EIKI Industrial (M) Sdn Bhd No. 11, Nouvelle Industrial Park, Lorong Teknologi B, Taman Sains Selangor 1, Kota Damansara PJU5, 47810 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60 3-6157-9330 Fax: +60 3-6157-1320 E-Mail: [email protected] Worl dWide Web sit e h ttp ://www. eiki.com