Eiki Projector Eip S200 User Manual
Here you can view all the pages of manual Eiki Projector Eip S200 User Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
MULTIMEDIA PROJECTOR MODEL EIP-S200 OWNER’S MANUAL
Page 2
![Page 2
EN-1
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can ra\
diate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications....](http://img.usermanuals.tech/thumb/1702/88673/w300_eiki-eip-s200-manual_d-1.png "Page 2
EN-1
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can ra\
diate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications....")
EN-1 Federal Communication Commission Notice Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can ra\ diate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications....
Page 3
![Page 3
EN-2
Safety Instructions
Read all of these instructions before you operate your projector and sav\
e for future
reference.
CAUTION : T O REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS...](http://img.usermanuals.tech/thumb/1702/88673/w300_eiki-eip-s200-manual_d-2.png "Page 3
EN-2
Safety Instructions
Read all of these instructions before you operate your projector and sav\
e for future
reference.
CAUTION : T O REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS...")
EN-2 Safety Instructions Read all of these instructions before you operate your projector and sav\ e for future reference. CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS...
Page 4
![Page 4
EN-3
1. Check that the operating voltage of your unit is identical with the volt\
age of yourlocal power supply.
2. Should any liquid or solid object fall into the cabinet, unplug the unit\
and have it checked by the qualified personnel before operating it further.
3. Do not attempt to service this product yourself, as opening or removing covers may damage the components inside and will void your warranty.
4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing...](http://img.usermanuals.tech/thumb/1702/88673/w300_eiki-eip-s200-manual_d-3.png "Page 4
EN-3
1. Check that the operating voltage of your unit is identical with the volt\
age of yourlocal power supply.
2. Should any liquid or solid object fall into the cabinet, unplug the unit\
and have it checked by the qualified personnel before operating it further.
3. Do not attempt to service this product yourself, as opening or removing covers may damage the components inside and will void your warranty.
4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing...")
EN-3 1. Check that the operating voltage of your unit is identical with the volt\ age of yourlocal power supply. 2. Should any liquid or solid object fall into the cabinet, unplug the unit\ and have it checked by the qualified personnel before operating it further. 3. Do not attempt to service this product yourself, as opening or removing covers may damage the components inside and will void your warranty. 4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing...
Page 5
![Page 5
EN-4
14. The projector is equipped with ventilation holes (intake) and ventilat\
ion holes(exhaust). Do not block or place anything near these slots, or internal heat build-up
may occur, causing picture degradation or damage to the projector.
15. When you replace the projector lamp, never touch the new bulb with your bare hands. The invisible residue left by the oil on your hands may shorten t\
he bulb life.
Use lint-free gloves or finger cots are recommended.
16. The product should be situated away...](http://img.usermanuals.tech/thumb/1702/88673/w300_eiki-eip-s200-manual_d-4.png "Page 5
EN-4
14. The projector is equipped with ventilation holes (intake) and ventilat\
ion holes(exhaust). Do not block or place anything near these slots, or internal heat build-up
may occur, causing picture degradation or damage to the projector.
15. When you replace the projector lamp, never touch the new bulb with your bare hands. The invisible residue left by the oil on your hands may shorten t\
he bulb life.
Use lint-free gloves or finger cots are recommended.
16. The product should be situated away...")
EN-4 14. The projector is equipped with ventilation holes (intake) and ventilat\ ion holes(exhaust). Do not block or place anything near these slots, or internal heat build-up may occur, causing picture degradation or damage to the projector. 15. When you replace the projector lamp, never touch the new bulb with your bare hands. The invisible residue left by the oil on your hands may shorten t\ he bulb life. Use lint-free gloves or finger cots are recommended. 16. The product should be situated away...
Page 6
![Page 6
EN-5
Ground
Notes on AC Power Cord
AC Power Cord must meet requirement of country where you use a projector\
. Confirm
an AC plug type with graphics below and proper AC Power Cord must be used. If
supplied AC Power Cord does not match your AC outlet, contact your sales dealer. This
projector is equipped with a grounding type AC line plug. Make sure that your outlet fits
the plug. Do not defeat the safety purpose of this grounding type plug. We highly
recommend using a video source device also equipped...](http://img.usermanuals.tech/thumb/1702/88673/w300_eiki-eip-s200-manual_d-5.png "Page 6
EN-5
Ground
Notes on AC Power Cord
AC Power Cord must meet requirement of country where you use a projector\
. Confirm
an AC plug type with graphics below and proper AC Power Cord must be used. If
supplied AC Power Cord does not match your AC outlet, contact your sales dealer. This
projector is equipped with a grounding type AC line plug. Make sure that your outlet fits
the plug. Do not defeat the safety purpose of this grounding type plug. We highly
recommend using a video source device also equipped...")
EN-5 Ground Notes on AC Power Cord AC Power Cord must meet requirement of country where you use a projector\ . Confirm an AC plug type with graphics below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. This projector is equipped with a grounding type AC line plug. Make sure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recommend using a video source device also equipped...
Page 7
![Page 7
EN-6
CONTENTS
CONTENTS CONTENTS
CONTENTS
CONTENTS
Introduction ........................................................................\
................................... 7
Projector Features ........................................................................\
..................... 7
Package Contents ........................................................................\
...................... 8
Projector Overview ........................................................................\...](http://img.usermanuals.tech/thumb/1702/88673/w300_eiki-eip-s200-manual_d-6.png "Page 7
EN-6
CONTENTS
CONTENTS CONTENTS
CONTENTS
CONTENTS
Introduction ........................................................................\
................................... 7
Projector Features ........................................................................\
..................... 7
Package Contents ........................................................................\
...................... 8
Projector Overview ........................................................................\...")
EN-6 CONTENTS CONTENTS CONTENTS CONTENTS CONTENTS Introduction ........................................................................\ ................................... 7 Projector Features ........................................................................\ ..................... 7 Package Contents ........................................................................\ ...................... 8 Projector Overview ........................................................................\...
Page 8
![Page 8
EN-7
* means compressed.
Introduction
Projector Features
The projector integrates high-performance optical engine projection and \
a user-friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
Single chip 0.55 Texas Instruments DLP® technology
SVGA (800 x 600 pixels) true resolution
1.07x manual zoom lens
Auto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scalin\
g compression
compatibility for VGA, SVGA, XGA* and SXGA*
Compatibility with...](http://img.usermanuals.tech/thumb/1702/88673/w300_eiki-eip-s200-manual_d-7.png "Page 8
EN-7
* means compressed.
Introduction
Projector Features
The projector integrates high-performance optical engine projection and \
a user-friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
Single chip 0.55 Texas Instruments DLP® technology
SVGA (800 x 600 pixels) true resolution
1.07x manual zoom lens
Auto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scalin\
g compression
compatibility for VGA, SVGA, XGA* and SXGA*
Compatibility with...")
EN-7 * means compressed. Introduction Projector Features The projector integrates high-performance optical engine projection and \ a user-friendly design to deliver high reliability and ease of use. The projector offers the following features: Single chip 0.55 Texas Instruments DLP® technology SVGA (800 x 600 pixels) true resolution 1.07x manual zoom lens Auto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scalin\ g compression compatibility for VGA, SVGA, XGA* and SXGA* Compatibility with...
Page 9
EN-8 Package Contents When you unpack the projector, make sure you have all these components: Save the original shipping carton and packing material; they will come in handy if you ever to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory. Projector with Lens Cap AC Power CordVGA Cable (D-Sub to D-Sub) Composite Video Cable Remote Control (IR) with Lithium battery Quick Start Guide Audio CableS-Video Cable Owner’s ManualProjector Carrying Case
Page 10
EN-9 Projector Over view Front View 1Ventilation holes 2Projection lens 3Front IR remote control sensor 4Lens cap 5Elevator foot 978 1123456 6Elevator button 7Zoom ring 8Focus ring 9Control panel