Eiki Projector Eip S200 User Manual
Here you can view all the pages of manual Eiki Projector Eip S200 User Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
EN-30 Appendix LED Indicator Messages ProjectorStatus Standby Lamp ignition failure Power on Lamp lifewarning Power off Over temperatureLED Type Power LED Lamp LED Color Status Color Status Meaning Green Amber Amber Amber Amber Amber Flashing Solid Solid Solid Solid Solid Off Off Green Amber Green Amber - - Solid Solid Flashing Flashing The projector is powered and ready. The projector system has some problems with its fan, so the projector cannot start up. The projector is operating normally. The...
Page 32
EN-31 Compatibility Modes Computer: ModeResolution fH (kHz) fV (Hz) Timing 480P640 x 480 31.46 59.9 60Hz VGA 640 x 480 37.86 72.860Hz VGA 640 x 480 37.5 75.075Hz VGA 640 x 480 43.2 85.085Hz VGA 720 x 400 31.5 70.060Hz VGA 720 x 400 37.9 85.085Hz SVGA 800 x 600 35.1 56.256Hz SVGA 800 x 600 37.8 60.360Hz SVGA 800 x 600 48.0 72.172Hz SVGA 800 x 600 46.8 75.075Hz XGA 1024 x 768 48.3 60.060Hz XGA 1024 x 768 56.4 70.070Hz XGA 1024 x 768 60.0 75.075Hz XGA 1024 x 768 68.8 84.985Hz Mac16”832 x 624 49.7 74.5...
Page 33
EN-32 Troubleshooting Refer to the symptoms and measures listed below before sending the projector for repairs. If the problem persists, contact your dealer or service center. Please refer to “LED Indicator Messages” (p.30) as well.Symptom No power. Power goes out during use. No image appears on screen. Partial, scrolling or incorrectly displayed image. Image is unstable or flickering. Image has vertical flickering bar. Image is out of focus. Cause The AC power cord is not plugged in. The AC power cord...
Page 34
EN-33 Symptom Remote control doesn’t work.Cause The battery could be weak. The remote control is not being used within the effective range. There are some obstructions between the remote control and projector. There are some fluorescent or other bright lights shining at the projector’s infrared remote sensor. Solution Replace with a new battery. Use the remote control within the effective range. Check that there are not obstructions between the remote control and projector. Check that there are not any...
Page 35
U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] China EIKI (Shanghai) Co.,LTD 1. Dapu Road, Golden Magnolia Plaza #2109 Shanghai, 200023 China Tel : 86-21-5396-0088 Fax : 86-21-5396-031 E-Mail : [email protected]...