Eiki Lc-Xs31 Multimedia Projector Owners Manual

71

Appendix
AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard (Green)
Image 1Image 2Image 3
Normal
0–630–63
Off
Image select
System (2)
System (3)
Image AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15 0–15
Image 1
Screen
Yes/No
Image 4
LanguageSetting18 languages provided.
Blue/User/BlackOff /On/Countdown offLogo select
On/Off
On/Off
Ready
On/Off
Code 1–Code 2
KeystoneBackgroundDisplayLogo
Ceiling
Rear...

7

Check the indicators for projector condition.
The projector is operating normally .
The projector is off. (The AC power cord is unplugged.)
The  projector  is  in  stand-by  mode.  Press  the  POWER 
ON/STAND-BY button to turn on the projector.
Projector ConditionPOWER
red/green
Indicators
LAMP 
REPLACE
yellow
WARNING
TEMP. 
red
The  filter  is  scrolled  using  the  Filter  control  function  in  the 
setting menu.
When  the  filter  is  being  scrolled,  the  Filter  replacement 
icon  and...

73

Appendix
The projector has been cooled down enough and the
temperature  returns  to  normal.  When  turning  on  the 
projector,  the  WARNING  TEMP.  indicator  stops  blinking. 
Check and replace the filter.
Projector ConditionPOWER
red/green
Indicators
LAMP 
REPLACE
yellow
WARNING
TEMP. 
red
WARNING
FILTER 
orange

Any
The lamp has been used overtime. Replace the lamp
immediately and then reset the lamp counter. The indicator 
will be turned off after resetting the counter.
Any
If the Filter...

74

Appendix
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below 
and less than 140 MHz of Dot Clock.
  When selecting these modes, PC adjustment can be limited.
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC 16832 x 62449.7274.55
SXGA...

75

When the input signal is digital from DVI terminal, refer to the chart b\
elow.
Note:
    The specifications are subject to change without notice.
Appendix
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
D-VGA640 x 48031.4759.94
D-480p640 x 48031.4759.88
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
D-720p1280 x 72037.5050.00
D-1035i1920 x 1035
D-1080i1920 x 1080
D-1080i1920 x 1080
33.7560.00(Interlace)
33.7560.00(Interlace)
28.12550.00(Interlace)
D-SXGA21280 x 102460.27658.069...

76

Appendix
Mechanical Information  
 Projector Type  Multi-media Projector 
 Dimensions (W x H x D)  16.1" x  3.3" x  10.3" (410 mm x 85 mm x 262.8 mm)  (Not including protrusions) 
 Net Weight  9.0 lbs (4.1 kg) 
	 Feet	�djustment	 0˚	to	10˚	 	 	 	 	 	
              
Panel Resolution  
 LCD Panel System  0.63" TFT Active Matrix type, 3 panels  
 Panel Resolution  1,024 x 768 dots 
 Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)              
             
Signal Compatibility...

77

Appendix
         Model No.
COMPONENT~VGA Cable    :    AH-98771 
SCART~VGA Cable   :    AH-98881
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. 
to the sales dealer.
Accessories
 Owner’s Manual (CD-ROM)
   Quick Reference Guide & Safety Manual
 AC Power Cord 
 Remote Control and Batteries                     
 VGA Cable 
 PIN Code Label 
 Network Application (CD-ROM)
● The specifications are subject to change without notice.
● LCD...

78

Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is ve\
rified 
conformance with PJLink Standard Class 1.
For PJ Link password, see the owner’s manual of “Network Set-up and Operation.”
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
Projector Input
RGB
RGB (Analog)
RGB (AV HDCP)
RGB (Digital)...

79

Appendix
COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Red (R/Cr) Input/Output   
Ground (Horiz.sync.)
Green (G/Y) Input/Output
-----
Blue (B/Cb) Input/Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5

4
3
6
7
8
+5V Power/-----
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC Data/-----
Ground/-----
Vert. sync.
DDC Clock/-----
9
13
10
1
11
14
15
RX –
TX +
TX –
RX +

3
4
87654321
5
6
7
8
1
LAN...

80

Appendix
Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost 
the number and unable to operate the projector, contact the service station. 
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
Put the label below (supplied) on in a prominent place of the 
projector's body while it is locked with a PIN code.
While the projector is locked with the PIN code.
PIN Code Lock No .
Logo PIN Code Lock No .
*Should  the...