Eiki Lc-Xs31 Multimedia Projector Owners Manual

31

Computer Input
PC adjust Menu
Some  computers  employ  special  signal  formats  which  may  not  be  tuned  by  Multi-scan  system  of  this  projector.  
Manual  PC Adjustment  enables  you  to  precisely  adjust  several  parameters  to  match  those  signal  formats.  The 
projector  has  five  independent  memory  areas  to  store  those  parameters  manually  adjusted.  It  allows  you  to 
recall the setting for a specific computer. 
1

Use the Point ◄► buttons to adjust the value,...

3

Computer Input
To store the adjusted data, select Store and then press the 
Point ► or the SELECT button. Move the highlight to one of 
the Modes 1 to 5 in which you want to store, and then press 
the SELECT button.
To clear the stored data, select Mode free and then press 
the Point ► or the SELECT button. Move the highlight to the 
Mode that you want to clear and then press the SELECT 
button.
Note:
 • Display  area  (H/V) cannot  be  selected  when 480i, 575i, 480p, 575p, 70p, 1035i  or...

33

Computer InputComputer Input
Image select Menu
IMAGE button
Dynamic
Real
Image 1
Image 
Blackboard(Green)
Standard
Remote Control
IMAGE button
Select the desired image mode among Dynamic, Standard, 
Real, Blackboard (Green), Colorboard, Image 1, Image , 
Image 3 and Image 4 by pressing the IMAGE button on the 
remote control.
Picture mode with improved halftone for graphics.
For the image projected on a blackboard.
This mode helps enhance the image projected on a 
blackboard. This is...

34

Computer Input
Image Adjust MenuPress the MENU button to display the On-Screen 
Menu. Use the Point ▲▼ buttons to select Image 
adjust and then press the Point ►or the SELECT 
button.
1
Use the Point ▲▼ buttons select the desired item 
and then press the SELECT button to display the 
adjustment dialog box. Use the Point ◄► buttons to 
adjust the setting value.
Note:
• When White balance Red, Green or Blue is  
  adjusted, Color temp . will change to User.
• When Blackboard(Green) or Colorboard...

35

Computer Input
This projector has the picture screen resize function, which 
enables you to customize the image size.
Screen Menu
Provide the image to fit the screen size.
Provide the image in its original size. When the original  
image size is larger or smaller than the screen size 
(1024 x  768), the projector enters to the panning  mode  
automatically. Use the Point ▲▼◄►buttons to pan the 
image. When adjusted, the arrows will turn red. When 
reached to the correction limits, the arrows will...

36

Computer Input
Select Digital  zoom  +.  The  On-Screen  Menu  disappears 
and D .  zoom  +  appears.  Press  the  SELECT  button  to 
expand  the  image  size.  Use  the  Point ▲▼◄►  buttons  to 
pan  the  image.  The  Panning  function  can  work  only  when 
the image is larger than the screen size.
A  projected  image  can  be  also  expanded  by  pressing  the 
D.ZOOM ▲ or the SELECT button on the remote control. 
To exit the Digital zoom +/– mode, press any button except 
the D.ZOOM  ▲▼...

37

Choose Video  or S-video  by  pressing  the  INPUT  button  on 
the top control or the VIDEO button or the S-video button on 
the remote control.
1

Input Menu
Video Input
When  video  input  signal  is  connected  to  the 
VIDEO jack, select Video.Video
When  video  input  signal  is  connected  to  the  S-
VIDEO jack, select S-video.S-video
Note:
   When  the  Input  Search  function  is  set  to On1  or On  in 
the Auto setup function, the input signal will be searched 
automatically...

38

Video Input
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or 
press the COMPONENT button or the COMPUTER 1 on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation \
as described 
below.
1
Input Menu
Use the Point ▲▼ buttons to select Computer 1 and 
then press the Point ► button.
When the input source is coming from video 
equipment connected to the COMPUTER 
IN 1/COMPONENT IN terminal...

39

Video Input
1AV System Menu (Video or S-video)
AV System Menu (Component)

If  the  projector  cannot  reproduce  proper  video  image, 
select  a  specific  broadcast  signal  format  from  among PAL, 
SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
The  projector  automatically  detects  an  incoming  video 
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select 
a specific component video signal format from among 480i, 
575i, 480p,...

40

Video Input
Image select Menu
Select the desired image mode among Dynamic, Standard, 
Cinema, Blackboard (Green), Colorboard, Image 1, 
Image , Image 3 and Image 4 by pressing the IMAGE 
button on the remote control.
Picture mode adjusted with fine tone.
IMAGE button
For the image projected on a blackboard.
This mode help enhance the image projected on a 
blackboard. This is mainly effective on a green colored 
board, not truly effective on a black colored board.
Remote Control
IMAGE button
For...