Eiki Lc-Xs31 Multimedia Projector Owners Manual

Network Supported 
Refer to the Owner's Manuals below for 
details about network function.
□		 Network Set-up and Operation
□		 PJ Network Manager
Multimedia Projector
Owner's Manual
LC-XS31MODEL 



Features and Design
This Multimedia Projector is designed with the most advanced technology \
for portability, durability, and ease of use. 
This projector utilizes built-in multimedia features, a palette of 16.77\
 million colors, and matrix liquid crystal display 
(LCD) technology.
♦ Compatibility
 T h e  p r o j e c t o r  w i d e l y  a c c e p t s  v a r i o u s  v i d e o  a n d 
computer  input  signals  including:  Computers,  6  Color 
systems  (PAL,  SECAM,  NTSC,  NTSC4.43,  PAL-M, 
a...

3

Table of Contents
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its  respective 
corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Table of Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
To the Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  ....

4

To the Owner
CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR 
BACK) . NO USER-SERVICEABLE PARTS 
INSIDE EXCEPT LAMP REPLACEMENT  . 
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL .
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before...

5

Safety Instructions
All  the  safety  and  operating  instructions  should  be  read 
before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them 
for  later  use.  Unplug  this  projector  from AC  power  supply 
before  cleaning.  Do  not  use  liquid  or  aerosol  cleaners. 
Use a damp cloth for cleaning.
F o l l o w  a l l  w a r n i n g s  a n d  i n s t r u c t i o n s  m a r k e d  o n  t h e 
projector.
For  added  protection  to  the  projector  during  a...

6

Safety Instructions
Openings  in  the  cabinet  are  provided  for  ventilation.  To 
ensure  reliable  operation  of  the  product  and  to  protect  it 
from  overheating,  these  openings  must  not  be  blocked 
or covered. 
 CAUTION
Hot  air  is  exhausted  from  the  exhaust  vent.  When  using 
or  installing  the  projector,  the  following  precautions 
should be taken. 
– Do not put any flammable object or spray can near the 
projector, hot air is exhausted from the air vents.
– Keep the...

7

Compliance
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful 
interference  in  a  residential  installation.  This  equipment  generates,  uses,  and  can  radiate  radio  frequency 
energy,  and  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause...

8

Part Names and Functions
①⑤⑥③②
Front
Back
④
① Air Intake Vent
② Power Cord Connector
③ Infrared Remote Receiver
④ Focus Ring (front)
⑤ Lens and Lens cover
⑥ Zoom Ring (rear)
⑦ Slide Shutter
⑧ Exhaust Vent
  CAUTION
Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
⑨ Lamp Cover
⑩ Speaker
⑪ Top Controls and Indicators
⑫ Terminals and Connectors
⑬ Filter Cover
⑭ Adjustable feet
 Kensington Security Slot
This slot is for a Kensington lock used to deter theft...

9

Part Names and Functions
②③①④⑥
⑩⑦⑨⑧
⑤
⑩ S-VIDEO IN
 Connect the S-VIDEO output signal from video 
equipment to this jack (p.15).
⑧ AUDIO IN
 Connect the audio output signal from video 
equipment connected to ⑨ or ⑩ to this jack. 
For a mono audio signal (a single audio jack), 
connect it to the L (MONO) jack (p.15).
⑦ COMPUTER1  COMPONENT/  COMPUTER  
AUDIO IN
 Connect the audio output (stereo) from a 
computer or video equipment connected to ② 
or ④ to this jack. (pp.14, 16)
⑨ VIDEO IN
 Connect...

10

Part Names and Functions
⑤ POINT ▲▼ buttons
 – Select an item or adjust the value in the 
        On-Screen Menu. (p.21)
 – Pan the image in Digital zoom + mode. (p.36)
③ wARNING TEMP  . indicator
 – Lights red when the projector detects an abnormal 
condition. 
  – Blinks red when the internal temperature of the projector 
exceeds the operating range (pp.59, 72-73).
⑪ ON/STAND–By  button
Turn the projector on or off (pp.18, 20).
① POwER indicator
 – Lights red when the projector is in stand-by...