Eiki Lc-Xs31 Multimedia Projector Owners Manual

							
71

Appendix
AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard (Green)
Image 1Image 2Image 3
Normal
0–630–63
Off
Image select
System (2)
System (3)
Image AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15 0–15
Image 1
Screen
Yes/No
Image 4
LanguageSetting18 languages provided.
Blue/User/BlackOff /On/Countdown offLogo select
On/Off
On/Off
Ready
On/Off
Code 1–Code 2
KeystoneBackgroundDisplayLogo
Ceiling
Rear
Power management
On start
Remote control
Shut downOff
Security
PIN code lock
Timer (1–30 Min)
L1/L2Fan
Standard
OffNoise reduction
Store/Reset
L1L2
0–630–63
Image 2Image 3Image 4
L2L1
User
OffCaptureYes/No
Off/OnLogo PIN code change
Logo PIN code lock
OffProjectorRemote control
Key lock
Default
Off/On1/On2PIN code change
Film
On/Off
Standby modeEco/NetworkColor temp.
Auto PC adj.
Auto keystoneAutoManualOff
Warning log
Hour(s)Filter counter
Yes/NoOff/400H/700H/1000H
Yes/NoFactory default
Wide
Scale
PositionCommonReset
H/V
H/VYes/NoYes/No
Custom
On/OffH&V
Colorboard
Input searchOff/On1/On2Auto setup
Closed CaptionClosed CaptionOff/CC1/CC2/CC3/CC4ColorColor/White
Lamp controlNormalEco
Lamp control
Mode 1/Mode 2Lamp life control
Filter counterTimerFilter counter reset
InformationInput Source Information Display
Red/Blue/Yellow/Green
Menu position
MidLowXLow
User
High
Yes/NoFilter control
Lamp counterLamp counter
Lamp counter resetYes/No
Yes/NoScroll(s)Scrolls remainingScroll counter reset
Video InputSetting
Information 
						

							
7

Check the indicators for projector condition.
The projector is operating normally .
The projector is off. (The AC power cord is unplugged.)
The  projector  is  in  stand-by  mode.  Press  the  POWER 
ON/STAND-BY button to turn on the projector.
Projector ConditionPOWER
red/green
Indicators
LAMP 
REPLACE
yellow
WARNING
TEMP. 
red
The  filter  is  scrolled  using  the  Filter  control  function  in  the 
setting menu.
When  the  filter  is  being  scrolled,  the  Filter  replacement 
icon  and  “Please  wait...”  message  (Fig.  1)  appear  on  the 
screen for about 30 seconds.
The projector is in the Power management mode. 
The projector is operating normally. 
WARNING
FILTER 
orange

Fig.1   Filter replacement icon and “Please wait...”


• • • off• • •  blinking slow           
     (approx. 2 seconds ON, 2 seconds OFF)
• • •  blinking fast 
      (approx. 0.5 seconds ON, 0.5 seconds OFF)
• • • red


The temperature inside the projector is elevated close to 
the abnormally high level.
The  temperature  inside  the  projector  is  abnormally  high. 
The  projector  cannot  be  turned  on.  When  the  projector 
is  cooled  down  enough  and  the  temperature  returns  to 
normal,  the  POWER  indicator  lights  red  and  the  projector 
can  be  turned  on.  (The  WARNING  TEMP.  indicator  keeps 
blinking.) Check and replace the filter.
Projector ConditionPOWER
red/green
Indicators
LAMP 
REPLACE
yellow
WARNING
FILTER 
orange


The projector is detecting abnormal condition .
• • • green / orange / yellow
blinking fast green
blinking fast red
green
green
green
WARNING
TEMP. 
red
blinking fast red
blinking fast red
The projector is preparing for stand-by or the projection 
lamp is being cooling down. The projector cannot be 
turned on until cooling is completed.
Appendix
Indicators and Projector Condition 
						

							
73

Appendix
The projector has been cooled down enough and the
temperature  returns  to  normal.  When  turning  on  the 
projector,  the  WARNING  TEMP.  indicator  stops  blinking. 
Check and replace the filter.
Projector ConditionPOWER
red/green
Indicators
LAMP 
REPLACE
yellow
WARNING
TEMP. 
red
WARNING
FILTER 
orange

Any
The lamp has been used overtime. Replace the lamp
immediately and then reset the lamp counter. The indicator 
will be turned off after resetting the counter.
Any
If the Filter counter reached a time set in the timer setting,
a  Filter  replacement  icon  (Fig.2)  appears  on  the  screen 
and  the  WARNING  FILTER  indicator  on  the  top  control 
lights  up.  Replace  the  filter  as  soon  as  possible.  If  the 
filter  is  out  of  scroll  and  the  projector  reaches  a  time  set 
in  the  timer  setting,  Fig.  3  appears  on  the  screen  and  the 
WARNING  FILTER  indicator  lights  up.  Replace  the  filter 
cartridge as soon as possible.If the filter is clogged and no 
scroll is left in the filter cartridge,
a Filter cartridge replacement icon (Fig.4) appears on the
screen  and  the  WARNING  FILTER  indicator  lights  up. 
Replace the filter cartridge as soon as possible.
Note:
  Fig.2, Fig.3 and Fig.4 icon will not appear when the 
  Display function is set to “Off” (p.46), during “Freeze” 
  (p.25), or “No show” (p.26).
Fig.2   Filter replacement icon
Fig.4   Filter cartridge replacement icon
Fig.3  Filter cartridge replacement icon
T h e   f i l t e r   c a r t r i d g e   i s   n o t   i n s t a l l e d   i n   t h e   p r o j e c t o r. 
Check  the  filter  compartment  to  see  if  the  filter  cartridge 
is  installed  in  the  projector.  When  the  filter  cartridge  is 
installed and the indicators continue to light and blink, read 
the column below.
The  projector  detects  an  abnormal  condition  and  cannot 
be  turned  on.  Unplug  the AC  power  cord  and  plug  it  again 
to  turn  on  the  projector.  If  the  projector  is  turned  off  again, 
unplug  the  AC  power  cord  and  contact  the  dealer  or  the 
service center. Do not leave the projector on. It may cause 
an electric shock or a fire hazard.
blinking fast orangeblinking fast yellow
 When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING 
FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with 
a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter\
 cartridge (p.62). 
 When  the  projection  lamp  reaches  its  end  of  life,  the  LAMP  REPLACE  indicator  lights yellow.  When  this 
indicator  lights yellow,  replace  the  projection  lamp  with  a  new  one  promptly.  Reset  the  lamp  counter  after 
replacing the lamp (p.65).



 red
orange
yellow 
						

							
74

Appendix
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below 
and less than 140 MHz of Dot Clock.
  When selecting these modes, PC adjustment can be limited.
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC 16832 x 62449.7274.55
SXGA 11152 x 86464.2070.40
SVGA 1800 x 60035.15656.25
SVGA 2800 x 60037.8860.32
SVGA 3800 x 60046.87575.00
SVGA 4800 x 60053.67485.06
SVGA 5800 x 60048.0872.19
SVGA 6800 x 60037.9061.03
SVGA 7800 x 60034.5055.38
SVGA 8800 x 60038.0060.51
SVGA 9800 x 60038.6060.31
SVGA 11800 x 60038.0060.51
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
XGA 101024 x 768
XGA 111024 x 768
XGA 121024 x 768
XGA 131024 x 768
62.0477.07
XGA 141024 x 768
61.0075.70
XGA 151024 x 768
35.52286.96(Interlace)
46.9058.20
XGA 81024 x 768
47.0058.30
XGA 91024 x 768
58.0372.00
SXGA 41280 x 1024
63.4879.35
36.0087.17(Interlace)
63.3459.98
SXGA 51280 x 1024
SXGA 61280 x 1024
SXGA 71280 x 1024
63.7460.01
71.6967.19
SXGA 101280 x 960
81.1376.107
60.0060.00
XGA 11024 x 768
XGA 41024 x 768
48.3660.00
XGA 61024 x 768
XGA 71024 x 768
56.47670.07
48.5060.02
44.0054.58
SXGA 81280 x 1024
SXGA 91280 x 1024
63.9860.02
79.97675.025
XGA 51024 x 76860.3174.92
VGA 7640 x 48043.26985.00
575i768 x 57615.62550.00(Interlace)
480i640 x 48015.73460.00(Interlace)
SXGA 121152 x 90071.4075.60
SXGA 111152 x 90061.2065.20
SVGA 10800 x 60032.7051.09
SXGA 131280 x 102450.0086.00(Interlace)
SXGA 21280 x 102462.5058.60
SXGA 31280 x 102463.9060.00
XGA 21024 x 76868.67784.997
XGA 31024 x 76860.02375.03
SXGA 181280 x 102446.4386.70(Interlace)
SXGA 191280 x 102463.7960.18
SXGA 141280 x 1024
SXGA 151280 x 1024
SXGA 161280 x 1024
SXGA 171152 x 900
50.0094.00(Interlace)
63.3760.01
76.9772.00
61.8566.00
MAC1280 x 96075.0075.08
MAC1280 x 102480.0075.08
1080i1920 x 108033.7560.00(Interlace)
720p1280 x 720
1035i1920 x 1035
45.0060.00
33.7560.00(Interlace)
1080i1920 x 108028.12550.00(Interlace)
SXGA+ 11400 x 105063.9760.19
MAC211152 x 87068.6875.06
UXGA 41600 x 120093.7575.00
WXGA 21360 x 768
WXGA 31376 x 768
WXGA 41360 x 768
UXGA 11600 x 1200
47.7060.00
UXGA 21600 x 1200
48.3660.00
UXGA 31600 x 1200
56.1672.00
75.0060.00
81.2565.00
WXGA 11366 x 768
87.570.00
48.3660.00
SXGA+ 21400 x 105065.3560.12
SXGA+ 31400 x 105065.1259.90
SXGA 201280 x 102491.14685.024
480p640 x 48031.4759.88
575p768 x 57531.2550.00
WXGA 71280 x 768
WXGA 81280 x 768
60.28974.893
68.63384.837
WXGA 61280 x 76847.77659.87
MAC 191024 x 76860.2475.08
720p1280 x 72037.5050.00
WXGA 101280 x 80041.20050.000
WXGA 91280 x 80049.60060.050
WXGA 111280 x 80049.70259.810
WUXGA 21920 x 1200
WSXGA+ 11680 x 1050
74.03859.950
65.29059.954
WUXGA 11920 x 120074.55659.885
WXGA+ 21440 x 90074.91860.000
WXGA+ 11440 x 90055.93559.887
Compatible Computer Specifications 
						

							
75

When the input signal is digital from DVI terminal, refer to the chart b\
elow.
Note:
    The specifications are subject to change without notice.
Appendix
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
D-VGA640 x 48031.4759.94
D-480p640 x 48031.4759.88
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
D-720p1280 x 72037.5050.00
D-1035i1920 x 1035
D-1080i1920 x 1080
D-1080i1920 x 1080
33.7560.00(Interlace)
33.7560.00(Interlace)
28.12550.00(Interlace)
D-SXGA21280 x 102460.27658.069
D-720p1280 x 72045.0060.00
D-SXGA31280 x 102431.6529.80D-575p768 x 57531.2550.00
D-SVGA800 x 60037.87960.32
D-XGA1024 x 76843.36360.00
D-SXGA11280 x 102463.9860.02
D-WXGA 11366 x 76848.3660.00
D-WXGA 21360 x 76847.760.00
D-WXGA 31376 x 76848.3660.00
D-WXGA 41360 x 76856.16072.000
D-WXGA 61280 x 76847.77659.870
D-WXGA 71280 x 76860.28974.893
D-WXGA 91280 x 80049.57259.870
D-WXGA 101280 x 80041.20050.000
D-WXGA 51366 x 76846.50050.000
D-WXGA +11440 x 90055.93559.887
D-SXGA+ 11400 x 105063.9760.19
D-SXGA+ 31400 x 105065.12059.900
D-WSXGA+11680 x 105065.29059.954
D-WUXGA 21920 x 120074.03859.950
D-SXGA+ 21400 x 105065.35060.120
D-WXGA 81280 x 76868.63384.837
D-WXGA 111280 x 80049.70259.810 
						

							
76

Appendix
Mechanical Information  
 Projector Type  Multi-media Projector 
 Dimensions (W x H x D)  16.1" x  3.3" x  10.3" (410 mm x 85 mm x 262.8 mm)  (Not including protrusions) 
 Net Weight  9.0 lbs (4.1 kg) 
	 Feet	�djustment	 0˚	to	10˚	 	 	 	 	 	
              
Panel Resolution  
 LCD Panel System  0.63" TFT Active Matrix type, 3 panels  
 Panel Resolution  1,024 x 768 dots 
 Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)              
             
Signal Compatibility   
 Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N 
 SD/HD TV signal  480i, 480p, 575i, 575p, 720p, 1035i and 1080i 
 Scanning Frequency  H-sync. 15 kHz ~ 100 kHz, V-sync. 50 ~100 Hz         
 
Optical Information 
 Projection Image Size (Diagonal)  Adjustable from 40” to 300” 
 Throw Distance  4.6' ~ 41.3' (1.4 m ~ 12.7 m)           
 Projection Lens  F 1.60-1.76 lens with f =22.33 mm ~ 26.80 mm with manual zoom and focus 
 Projection Lamp  220 W            
  
Interface
 Video Input Jack  RCA Type x 1  
 S-video Input Jack  Mini DIN 4 pin x 1 
 Audio Input Jacks  RCA Type x 2
 Computer 1/Component Audio Input Jack  Mini Jack x 1
 Computer 2 Audio Input Jack  Mini Jack x 1 
 Computer In 1/Component Input Terminal        Mini D-sub 15 pin x 1 
 Computer In 2/DVI-I Input                                 DVI-I Terminal x 1
   Monitor Output Terminal                                    Mini D-sub 15 pin x 1 
 Control port    D-sub 9 pin x 1 
 Audio Output Jack  Mini Jack (stereo) x 1 (variable)           
 LAN Connection Terminal                                 RJ45 
 
Audio 
 Internal Audio Amp  7.0 W RMS 
 Built-in Speaker  1 speaker, ø1.46" (37mm)  
 
Power
 Voltage and Power Consumption  AC 100–120 V (3.4A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
                                                      AC 200–240 V (1.7A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.) 
         
Operating Environment
	 Operating	Temperature	 41˚F–95˚F	(5	˚C–35	˚C) 
	 Storage	Temperature	 14˚F–140˚F	(-10˚C–60	˚C) 
 
Remote Control 
  Battery AAA or LR03 1.5V ALKALINE TYPE x 2Battery AAA or LR03 1.5V ALKALINE TYPE x 2           
	Operating Range 16.4��(5 m)��30˚Operating	Range	 16.4��	(5	m)��30˚ 
  Dimensions 2.0" (W) x 0.7" (H) x 4.3" (D) (52 mm x 18 mm x 110 mm)Dimensions 2.0" (W) x 0.7" (H) x 4.3" (D) (52 mm x 18 mm x 110 mm)       
  Net Weight 2.37 oz (67 g) (including batteries)Net Weight 2.37 oz (67 g) (including batteries) 
Technical Specifications 
						

							
77

Appendix
         Model No.
COMPONENT~VGA Cable    :    AH-98771 
SCART~VGA Cable   :    AH-98881
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. 
to the sales dealer.
Accessories
 Owner’s Manual (CD-ROM)
   Quick Reference Guide & Safety Manual
 AC Power Cord 
 Remote Control and Batteries                     
 VGA Cable 
 PIN Code Label 
 Network Application (CD-ROM)
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are 
    effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD 
    panels.
Optional Parts 
						

							
78

Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is ve\
rified 
conformance with PJLink Standard Class 1.
For PJ Link password, see the owner’s manual of “Network Set-up and Operation.”
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
Projector Input
RGB
RGB (Analog)
RGB (AV HDCP)
RGB (Digital)
Component
RGB (Scart)
PJLink Input
RGB 2
RGB 1
DIGITAL 2
DIGITAL 1
RGB 3
RGB 4
Video
S-video
VIDEO 2
VIDEO 3
Computer 2 
Computer 1
Video
Parameter
12
11
32
31
13
14
22
23
Pj Link Notice 
						

							
79

Appendix
COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Red (R/Cr) Input/Output   
Ground (Horiz.sync.)
Green (G/Y) Input/Output
-----
Blue (B/Cb) Input/Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5

4
3
6
7
8
+5V Power/-----
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC Data/-----
Ground/-----
Vert. sync.
DDC Clock/-----
9
13
10
1
11
14
15
RX –
TX +
TX –
RX +

3
4
87654321
5
6
7
8
1
LAN TERMINAL
-----
-----
----------
COMPUTER  / DVI-I TERMINAL (DIGITAL/ANALOG) 
1917
21018
31119
41220
51321
61422
71523
81624
C1C2
C3C5C4
T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No Connect
T.M.D.S. Data2 Shield
DDC Clock
DDC Data
Analog Vert. sync
1
5

4
3
6
7
8
T.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No Connect
T.M.D.S. Data1 Shield
+5V Power
Ground (for +5V)
Hot Plug Detect
9
13
10
1
11
14
15
16
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No Connect
T.M.D.S. Data0 Shield
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
17
1
18
0
19

3
4
Analog Red Input
Analog Ground (R/G/B)
Analog Green Input
Analog Horiz. sync
Analog Blue Input
C1
C5
C
C4
C3
CONTROL PORT CONNECTOR (D-sub 9 pin)
-----
R X D
T X D

3
4
1
-----
-----
5
6
7
8
SG
RTS
CTS
Serial
-----9
Configurations of Terminals 
						

							
80

Appendix
Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost 
the number and unable to operate the projector, contact the service station. 
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
Put the label below (supplied) on in a prominent place of the 
projector's body while it is locked with a PIN code.
While the projector is locked with the PIN code.
PIN Code Lock No .
Logo PIN Code Lock No .
*Should  the  four-digit  number  be  changed, 
the factory set number will be invalid.
PIN Code Number Memo