Eiki Lc-Xbl30 Multimedia Projector Owners Manual

31
Computer Input
Store
To	store	the	adjusted	data,	select  Store and	then	press	the	
Point	
►	or	the	SELECT	button.	Move	the	highlight	to	one	of	
the	Modes	1	to	5	in	which	you	want	to	store,	and	then	press	
the	SELECT	button.
Mode free
To 	clear	the	stored	data,	select	Mode free	and	then	press	
the	Point	
►	or	the	SELECT	button.	Move	the	highlight	to	the	
Mode	that	you	want	to	clear	and	then	press	the	SELECT	
button.
Note:
	 •	 Display area (H/V) cannot	 be	 selected	 when	 480i,	575i,	480p,	 575p,...

32
Computer Input
Image select Menu
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Image Mode Selection 
Image 4
Blackboard(Green)
Standard
Remote Control
IMAGE button
Select	the	desired	image	mode	among	Dynamic,	
Standard,	
Real,	Blackboard (Green),	Colorboard,	 Image 1,	Image 2,	
Image 3	and	 Image 4	by	pressing	the	IMAGE	button	on	the	
remote	control.
Standard
Picture	mode	with	improved	halftone	for	graphics. Real
Blackboard (Green)
Image 1–4
For	the	image	projected	on	a	blackboard.
This	mode	helps...

33
Computer Input
Image Adjust Menu
Image Adjustment
Reset
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
▲▼	buttons	to	select	Image 
adjust	and	then	press	the	Point	
►or	the	SELECT	
button.
1
2Use	the	Point	▲▼	buttons	select	the	desired	item	
and	then	press	the	SELECT	button	to	display	the	
adjustment	dialog	box.	Use	the	Point	
◄►	buttons	to	
adjust	the	setting	value.
Note:•	When	White	balance  Red,	Green	or	Blue	is		
		adjusted,	Color temp .	will	change	to	User .
•	When...

34
Computer Input
Store
This	projector	has	the	picture	screen	resize	function,	which	
enables	you	to	customize	the	image	size.Screen Menu
Screen Size Adjustment
Provide	the	image	to	fit	the	screen	size. Normal
True
Provide	the	image	in	its	original	size.	When	the	original		
image	size	is	larger	or	smaller	than	the	screen	size	
(1024	x		768),	the	projector	enters	to	the	panning		mode		
automatically.	Use	the	Point	
▲▼◄►	buttons	to	pan	the	
image.	When	adjusted,	the	arrows	will	turn	red.	When	
reached	to...

35
Computer Input
Select	Digital zoom +.	The	On-Screen	Menu	disappears	and	
D . zoom +	appears.	Press	the	SELECT	button	to	expand	the	
image	size.	Use	the	Point	
▲▼◄►	buttons	to	pan	the	image.	
The	Panning	function	can	work	only	when	the	image	is	larger	
than	the	screen	size.
A	 projected	 image	can	be	also	 expanded 	by	 pressing 	the 	
D.ZOOM	
▲	or	the	SELECT	button	on	the	remote	control.	
To 	exit	the	Digital	zoom	+/–	mode,	press	any	button	except	
the	D.ZOOM	
▲▼	buttons,	SELECT	and	Point	buttons....

36
Choose	Video	or	 S-video 	by	 pressing	 the	VIDEO 	or	 the 	
S-VIDEO	button	on	the	remote	control.
Before	 using	 these	 buttons,	 correct	 input	 source	 should	 be	
selected	through	menu	operation	as	described	below.
1
2
Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When 	video 	input 	signal 	is 	connected 	to 	the 	
VIDEO	jack,	select	Video.Video
When	 video	 input	 signal	 is	 connected	 to	 the	 S-
VIDEO	jack,	select	S-video.S-video
Note:...

37
Video Input
Choose	Computer 1(Component)	or	Computer 1(Scart) by	pressing	the	COMPONENT	or	the	COMPUTER	1	
button	on	the	remote	control.
Before	using	these	buttons,	correct	input	source	should	be	selected	through	Menu	operation	as	described	
below.
1
Input Menu
2Use	the	Point	▲▼	buttons	to	select	Computer 1	and	
then	press	the	Point	
►	button.
Input Source Selection (Component, RGB Scart 21-pin)
When	the	input	source	is	coming	from	video	
equipment	connected	to	the	COMPUTER	
IN	1/S-VIDEO	IN/COMPONENT...

38
Video InputVideo System Selection
1AV System Menu (Video or S-video)
AV System Menu (Component)
2
If	the	 projector	 cannot	reproduce	 proper	video	image, 	
select	 a	 specific	 broadcast	 signal	 format	 from	 among	 PA L,	
SECAM,	NTSC,	NTSC 4 .43,	PAL-M,	and	PAL-N. PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The 	projector	 automatically 	detects 	an 	incoming 	video 	
signal,	and	adjusts	itself	to	optimize	its	performance.
If	the	projector	cannot	reproduce	proper	video	image,	select	
a	specific	component...

39
Video Input
Image select Menu
Select	the	desired	image	mode	among	Dynamic,	Standard,	
Cinema,	Blackboard (Green),	Colorboard,	Image 1,	
Image 2,	Image 3	and	Image 4	by	pressing	the	IMAGE	
button	on	the	remote	control.
Standard
Picture	mode	adjusted	with	fine	tone. Cinema
Blackboard (Green)
Image 1–4
IMAGE button
Dynamic
Cinema
Image Mode Selection 
For	the	image	projected	on	a	blackboard.
This	mode	help	enhance	the	image	projected	on	a	
blackboard.	This	is	mainly	effective	on	a	green	colored	
board,...

40
Video InputImage Adjustment
1
2
Press	the	Point	◄	button	to	decrease	the	contrast;	press	the	
Point	
►	button	to	increase	the	contrast	(from	0	to	63).
Press	the	Point	◄	button	to	decrease	the	brightness;	press		
the	Point	
►	button	to	increase	the	brightness	(from	0	to	63).
Contrast
Brightness
Press	the	Point	◄	button	to	lighten	red	tone;	press	the	Point	
►	button	to	deepen	red	tone	(from	0	to	63).
white balance (Red)
Press
	the 	Point 	◄	button 	to 	lighten 	green 	tone; 	press 	the 	
Point	
►	button...