Eiki Lc-Xbl30 Multimedia Projector Owners Manual

21
Basic Operation
How to Operate the On-Screen Menu
The	projector	can	be	adjusted	or	set	via	the	On-Screen	
Menu.	The	menus	have	a	hierarchical	structure,	with	
a	main	menu	that	is	divided	into	submenus,	which	are	
further	divided	into	other	submenus.	For	each	adjustment	
and	setting	procedure,	refer	to	respective	sections	in	this	
manual.
Use	the	Point	
▲▼	buttons	to	highlight	or	select	a	main	
menu	item.	Press	the	Point	
►	or	the	SELECT	button	
to	access	the	submenu	items.	(The	selected	item	is...

22
Menu Bar
For	detailed	functions	of	each	menu,	see	“Menu	Tree”	on	pages	67-68.
Basic Operation
①
②
③
④
⑤
⑥
⑦
⑧
Main	MenuSub-Menu
⑨
⑩
③	Image select
	For	computer	source,	used	to	select	an	image	mode	from	among	 Dynamic,	Standard,	Real,	Blackboard(Green),	
Colorboard	and	image	1 - 4	(p.32).	
						For	Video	source,	used	to	select	an	image	mode	among	 Dynamic,	Standard,	Cinema,	Blackboard(Green),	Colorboard	
and	Image 1- 4	(p.39).
④	 Image adjust
	 For	computer	source,	used	to	adjust	computer	image	[...

23
Basic Operation
Rotate	the	Zoom	Ring	to	zoom	in	and	out.		
Rotate	the	Focus	Ring	to	adjust	the	focus	of	the	image.		
Zoom and Focus Adjustment
If	a	projected	picture	still	has	keystone	distortion	after	
pressing	the	AUTO	SETUP	button	on	the	top	control	or	the	
AUTO	SET	button	on	the	remote	control,	correct	the	image	
manually	as	follows:
Press	the	KEYSTONE	button	on	the	remote	control.	The	
Keystone	dialog	box	appears.	Use	the	Point	
▲▼	buttons	to	
correct	keystone	distortion.	The	keystone	adjustment...

24
Sound Adjustment
1
2
Press	the	MENU	button	to	display	the	On-Screen	Menu.	
Use	the	Point	
▲▼	buttons	 to	select	 Sound.	 Press	the 	
Point	
►	 or	 the	 SELECT	 button	 to	 access	 the	 submenu	
items.	
Press	 the	 VOLUME+/–	 buttons	 on	 the	 top	 control	 or	 on	 the	
remote	 control	 to	 adjust	 the	 volume.	The	 volume	 dialog	 box	
appears	on	the	screen	for	a	few	seconds.
Press	 the	 MUTE	 button	 on	 the	 remote	 control	 to	 select	 On	
to	 temporarily 	turn 	off 	the 	sound. 	To 	turn 	the...

25
Basic Operation
Remote Control Operation
Using	the	remote	control	for	some	frequently	used	operations	is	advisable.	Just	pressing	one	of	the	buttons	
enables	you	to	make	the	desired	operation	quickly	without	calling	up	the	On-Screen	Menu.
Press	the	COMPUTER	1/2,	VIDEO,	S-VIDEO	and	
COMPONENT	buttons	on	the	remote	control	to	select	the	
input	source.	See	pages	27,	36-37	for	details.
COMPUTER 1/2, VIDEO, S-VIDEO and COMPONENT  
buttons
Display	the	input	source	information:	 Input,	H-sync freq .,	
V-sync...

26
Basic Operation
black	out		→	normal	→	black	out	→	normal•	•	•	•	•
Press	 the	 NO	 SHOW	 button	 on	 the	 remote	 control	 to	 black	 out	
the	image. 	To 	restore 	to 	normal, 	press 	the 	NO 	SHOW	 button	
again	or	press	any	other	button.	The	screen	changes	each	time	
you	press	the	NO	SHOW	button	as	follows.
NO SHOw button
Press	the	P-TIMER	button	on	the	remote	control.	The	P-Timer	
display	 00:00	appears	on	the	screen	and	the	countdown	starts	
(00:00–59:59).
To 	stop	the	countdown,	press	the	P-TIMER...

27
Choose	 either	Computer 1(RGB) or	 Computer 2(RGB)	 by	 pressing	 the	 COMPUTER	 1	 or	 Computer	 2	 button	
on	the	remote	control.
Before 	using 	these 	buttons, 	correct 	input 	source 	should 	be 	selected 	through 	Menu 	operation 	as 	described 	
below.
1
Input Menu
2
3
Computer Input 
COMPUTER 1 button
Note:
	 	 When	the	Input	Search	function	is	set	to	On1	or	On2	in	 the	Auto	setup	function,	the	input	signal	will	be	searched	
automatically	(p.44).
Computer  1
Remote Control
Direct Operation...

28
Computer Input
PC System Menu
PC System Menu
Computer System Selection
This	projector	automatically	tunes	to	various	types	of	computers	with	its	Multi-scan	system	and	Auto	PC	
Adjustment.	If	a	computer	is	selected	as	a	signal	source,	this	projector	automatically	detects	the	signal	format	
and	tunes	to	project	a	proper	image	without	any	additional	settings.	(Signal	formats	provided	in	this	projector	are	
shown	on	page	70.)
One	of	the	following	messages	may	appear	when:
The	projector	cannot	recognize...

29
Computer Input
Auto	PC	Adjustment	function	is	provided	to	automatically	adjust	Fine sync,	Total dots,	Horizontal	and	Vertical	
positions	to	conform	to	your	computer.
PC adjust Menu
Auto PC Adjustment
To store adjustment parameters
The	adjusted	parameters	from	the	Auto	PC	Adjustment	can	
be	stored	in	the	projector.	Once	the	parameters	are	stored,	
the	setting	can	be	done	just	by	selecting	a	 Mode (1–5)	in	
the	PC	System	Menu	(see	page	28).	See	also	“Store”	on	
page	31.
Note:
	 •	 Fine sync,	Total dots...

30
Computer Input
PC adjust Menu
Manual PC Adjustment
Some	 computers	 employ	 special	 signal	 formats	 which	 may	 not	 be	 tuned	 by	 Multi-scan	 system	 of	 this	 projector.		
Manual	 PC	Adjustment	 enables	 you	 to	 precisely	 adjust	 several	 parameters	 to	 match	 those	 signal	 formats.	 The	
projector	has 	five 	independent 	memory 	areas 	to 	store 	those 	parameters 	manually 	adjusted. 	It 	allows 	you 	to 	
recall	the	setting	for	a	specific	computer.	
1
2
Use	the	Point	◄►	buttons	to	adjust...