Eiki Lc-Xbl30 Multimedia Projector Owners Manual

Multimedia Projector 
MODEL LC-XBL30
Owner’s Manual
  Network Supported 
□		 Wired	LAN
Refer	to	the	Owner's	Manuals	below	for	
details	about	network	function.
□ 			 Network	Set-up	and	Operation
□ 			 PJ	Network	Manager 

2
Features and Design
This	Multimedia	Projector	is	designed	with	the	most	advanced	technology	for	portability,	durability,	and	ease	of	use.	
This	projector	utilizes	built-in	multimedia	features,	a	palette	of	16.77	million	colors,	and	matrix	liquid	crystal	display	
(LCD)	technology.
♦ Compact Design
	 This	 projector	 is	 designed	 compact	 in	 size	 and	 weight.	It	 is	 easy	 to	 carry	 and	 installed	 anywhere	 you	 wish	 to	
use.
♦ Simple Computer System Setting
	 The	 projector	 has	 the	 Multi-scan...

3
Table of Contents
Trademarks
Each	name 	of 	corporations 	or 	products 	in 	this 	book 	is 	either 	 a	registered 	trademark 	or 	 a	 trademark 	of 	its 	respective 	
corporation.
Features and Design   . . . . . . . . . . . . . . . . . . .2
Table of Contents  . . . . . . . . . . . . . . . . . . . . . .3
To the Owner  . . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions  . . . . . . . . . . . . . . . . . . . . .5
Air	Circulation	 6
Installing	the	Projector	in	Proper	Position	 6...

4
To the Owner
CAUTION:     TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR 
BACK) . NO USER-SERVICEABLE PARTS 
INSIDE EXCEPT LAMP REPLACEMENT . 
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL .
THIS	SYMBOL	INDICATES	THAT	DANGEROUS	
VOLTAGE	CONSTITUTING	A	RISK	OF	ELECTRIC	
SHOCK	IS	PRESENT	WITHIN	THIS	UNIT.
THIS	SYMBOL	INDICATES	THAT	THERE	ARE	
IMPORTANT	OPERATING	AND	MAINTENANCE	
INSTRUCTIONS	IN	THE	OWNER'S	MANUAL	
WITH	THIS	UNIT.
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
Before...

5
Safety Instructions
All	the 	safety 	and 	operating 	instructions 	should 	be 	read 	
before	the	product	is	operated.
Read 	all 	of 	the 	instructions 	given 	here 	and 	retain 	them 	
for	 later	 use.	 Unplug	 this	 projector	 from	AC	 power	 supply	
before 	cleaning. 	Do 	not 	use 	liquid 	or 	aerosol 	cleaners. 	
Use	a	damp	cloth	for	cleaning.
Follow 	all 	warnings 	and 	instructions 	marked 	on 	the 	
projector.
For 	added 	protection 	to 	the 	projector 	during 	 a	lightning 	
storm, 	or 	when 	it...

6
Safety Instructions
Openings	 in	 the	 cabinet	 are	 provided	 for	 ventilation.	To	
ensure	 reliable	 operation	 of	 the	 product	 and	 to	 protect	 it	
from	 overheating,	 these	 openings	 must	 not	 be	 blocked	
or	covered.	
	 CAUTION
Hot	 air	 is	 exhausted	 from	 the	 exhaust	 vent.	 When	 using	
or	 installing 	the	 projector, 	the	 following	 precautions 	
should	be	taken.	
–	Do	not	put	any	flammable	object	or	spray	can	near	the	 projector,	hot	air	is	exhausted	from	the	air	vents.
–	Keep	the...

7
Safety InstructionsCompliance
Federal Communications Commission Notice
Note:	This	equipment	has	been	tested	and	found	to	comply	with	the	limits	for	a	Class	B	digital	device,	pursuant	
to	Part 	15 	of 	the 	FCC 	Rules. 	These 	limits 	are 	designed 	to 	provide 	reasonable 	protection 	against 	harmful 	
interference 	in 	 a	 residential 	installation. 	This 	equipment 	generates, 	uses, 	and 	can 	radiate 	radio 	frequency 	
energy, 	and 	if 	not 	installed 	and 	used 	in 	accordance 	with 	the...

8
Part Names and Functions
⑤⑦⑧
③
②
Front
Back
⑥
①	 Top controls and Indicators
②	 Zoom Ring
③	 Focus Ring
④	 Speaker
⑤ Infrared Remote Receiver
⑥	 Projection Lens
⑦	 Lens Cap
	 (See	page	60	for	attaching.)
⑧	 Air Intake Vent
⑨	 Lamp Cover
⑩	 Terminals and Connectors
⑪	 LAN Connection Terminal
⑫ Power Cord Connector
⑬ Exhaust Vents
CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.	Do	not	put	
heat-sensitive	objects	near	this	side.
⑭	Filters
⑮	 Adjustable Foot
Note:
⑪ 	LAN	Connection	Terminal	is	for	the...

9
Part Names and Functions
Rear Terminal 
② ③①④
⑥
⑦⑤
⑦	AUDIO IN
	 Connect	the	audio	output	signal	from	computer	or	 video	equipment	to	this	jack	(pp.14-16).
⑤	VIDEO IN
	 Connect	the	composite	video	output	signal	to	this	 jack	(p.15).
②	COMPUTER IN 1 /S-VIDEO IN / COMPONENT IN
	 Connect	analog	RGB	output	signal	from	a	 computer,	S-VIDEO	output	signal	from	video	
equipment,	or	RGB	scart	21-pin	video	output	or	
component	video	output	to	this	terminal	(pp.14-16).
④	AUDIO OUT (VARIABLE)
	 Connect	an	external...

10
Part Names and FunctionsTop Control
⑦	LAMP REPLACE indicator
	 Lights	yellow	when	the	projection	lamp	reaches	its	 end	of	life	(pp.61,	69).
⑧	wARNING indicator
	 –	Lights	red	when	the	projector	detects	an	 abnormal	condition.	
	 –	Blinks	red	when	the	internal	temperature	of	the	 projector	exceeds	the	operating	range	(pp.58,	
69).
④	ON/STAND–By button
Turn	the	projector	on	or	off 	(pp.18-20).
⑤	POwER indicator
	 –	Lights	red	when	the	projector	is	in	stand-by	mode.
	 –	Lights	green	during	operations....