Eiki Lc-Xb42n Multimedia Projector Owners Manual

41
Video Input
Choose  Computer  2  by  pressing  the  INPUT  button  on  the 
top  control  or  press  the  COMPUTER  button  on  the  remote 
control.
Before  using  these  buttons,  correct  input  source  should  be 
selected through Menu operation as described below.
1
Computer 2
Input Menu
Use  the  Point ▲▼  buttons  to  move  the  red  arrow 
pointer  to  Computer  2  and  then  press  the  SELECT 
button.  2
After  the  Source  Select  Menu  appeared  for  Computer 
2,  move  the  pointer  to...

42
Video InputVideo System Selection
Press the MENU button to display the On-Screen 
Menu. Use the Point 
◄► buttons to move the red 
frame pointer to the AV System Menu icon.1
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use the Point ▲▼ buttons to move the red arrow 
pointer to the desired system and then press the 
SELECT button.2
If  the  projector  cannot  reproduce  proper  video  image, 
select  a  specific  broadcast  signal  format  from  among  PAL, 
SECAM, NTSC, NTSC 4.43,...

4
Video Input
Move the red frame pointer to 
the desired image mode and 
press the SELECT button.
The selected image mode is check marked.
Image Select Menu
Standard
Cinema
Blackboard(Green)
For viewing with the user preset image mode in the Image 
Adjust Menu (pp. 44–45). Image1–4
Image Select Menu icon
Select  the  desired  image  mode  from  among  Dynamic, 
Standard,  Cinema,  Blackboard  (Green),  Image  1,  Image  2, 
Image 3, and Image 4 by pressing the IMAGE button on the 
remote control....

44
Video InputImage Adjustment
Press the MENU button to display the On-Screen Menu. 
Use the Point 
◄► buttons to move the red frame pointer 
to the Image Adjust Menu icon.1
2Use  the  Point ▲▼  buttons  to  move  the  red  frame 
pointer to the desired item and then press the SELECT 
button  to  display  the  adjustment  dialog  box.  Use  the 
Point 
◄► buttons to adjust the setting value.
Press the Point ◄ button to decrease the contrast; press the 
Point 
► button to increase the contrast (from 0 to...

45
Video Input
Use  the  Point ◄►  buttons  to  adjust  the  gamma  value  to 
obtain a better balance of contrast (from 0 to 15). Gamma
Press  the  Point ◄  button  to  decrease  the  sharpness  of  the 
image;  press  the  Point 
►  button  to  increase  the  sharpness 
of the image (from 0 to 15). Sharpness
An  interlaced  video  signal  can  be  displayed  in  progressive 
mode. Select one of the following options.
 
Off  ..........  Disabled.
  L1

 ..........  For an active picture.
  L2...

46
Video Input
This projector has the picture screen resize function, which enables you\
 to customize the image size.Normal
Screen Size Adjustment
Screen MenuPress  the  MENU  button  to  display  the  On-Screen 
Menu.  Use  the  Point 
◄►  buttons  to  move  the  red 
frame pointer to the Screen Menu icon.1
Use  the  Point ▲▼  buttons  to  move  the  red  frame  
pointer  to  the  desired  function  and  then  press  the 
SELECT button.2
Provide the image at the 4:3 normal video aspect ratio.
Custom...

47
Language
The  language  used  in  the  On-Screen  Menu  is  available  in 
English,  German,  French,  Italian,  Spanish,  Portuguese, 
Dutch,  Swedish,  Finnish,  Polish,  Hungarian,  Romanian, 
Russian, Chinese, Korean, and Japanese.
Set  the  red  frame 
pointer  to  the  item 
a n d   p r e s s   t h e 
SELECT button.
Press the SELECT button 
a t   L a n g u a g e ,   t h e n   t h e 
Language Menu appears.
Setting Menu (Language)
Setting Menu icon
Setting
Setting
Auto setup
This function enables...

48
Setting
Display
Blue back
When  this  function  is  “On,”  a  blue  image  is  displayed  while 
the input signal is not detected. Keystone
T h i s   f u n c t i o n   i s   u s e d   t o   s t o r e   o r   r e s e t   t h e   k e y s t o n e 
correction  when  the  AC  power  cord  is  unplugged.  Use  the 
Point 
◄► buttons to switch between each option.
  Store  ........ Keep  the  keystone  correction  even  when  the 
AC power cord is unplugged.
  Reset  ....... Release the keystone correction...

49
Setting
Select [Yes] to capture 
the projected image. 
Select [Yes] to 
stop capturing.  
Capture
Logo (Logo and Logo PIN code lock settings)
Logo select
This  function  allows  you  to  customize  the  screen  logo  with 
Logo select, Capture, and Logo PIN code lock functions.
Note:
  • When  “On”  is  selected  in  the  Logo  PIN  code  lock 
function,  Logo  select  and  Capture  functions  cannot  be 
selected.
Capture
This  function  enables  you  to  capture  an  image  being 
projected  to...

50
Logo PIN code lock
Setting
This  function  prevents  an  unauthorized  person  from 
changing the screen logo.
 Off  ............  The screen logo can be changed freely from 
the Logo Menu (p.49).
  On

 ............  The screen logo cannot be changed without 
a Logo PIN code.
If  you  want  to  change  the  Logo  PIN  code  lock  setting, 
press  the  SELECT  button  and  the  Logo  PIN  code  dialog 
box  appears.  Enter  a  Logo  PIN  code  by  following  the 
steps below. The initial Logo PIN code...