Eiki Lc-Xb42n Multimedia Projector Owners Manual

1
Computer Input
Choose  Computer  1(Digital)  by  pressing  the  INPUT  button 
on  the  top  control  or  press  the  COMPUTER  button  on  the 
remote control.
Before  using  these  buttons,  correct  input  source  should  be 
selected through Menu operation as described below.
Press the MENU button to display the On-Screen Menu. 
Use  the  Point 
◄►  buttons  to  move  the  red  frame 
pointer to the Input Menu icon.1
Input MenuUse  the  Point ▲▼  buttons  to  move  the  red  arrow 
pointer  to...

2
Computer Input
The Auto PC Adjustment 
function operates to adjust 
the projector. 
PC System Menu
The PC System Menu icon 
 Selected system is    
  displayed.
Systems in this dialog box 
can be selected.
PC System Menu
Customized Mode (1–5) set in 
the PC Adjust Menu (pp.34–35).
Computer System Selection
This  projector  automatically  tunes  to  various  types  of  computers  based  on  VGA,  SVGA,  XGA,  SXGA,  WXGA, 
or  UXGA  with  its  Multi-scan  system  and Auto  PC Adjustment.  If  a...


Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical 
positions to conform to your computer.
Move the red frame pointer 
to Auto PC Adj. and press 
the SELECT button.
“Please wait...” appears 
while the Auto PC 
adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
Auto PC Adjustment
Remote Control
AUTO PC button
The  Auto  PC  adjustment  function  can  be  operated  directly 
by pressing the AUTO PC button on the...

4
Computer Input
PC Adjust Menu
Manual PC Adjustment
Some  computers  employ  special  signal  formats  which  may  not  be  tuned  by  Multi-scan  system  of  this  projector.  
Manual  PC Adjustment  enables  you  to  precisely  adjust  several  parameters  to  match  those  signal  formats.  The 
projector  has  five  independent  memory  areas  to  store  those  parameters  manually  adjusted.  It  allows  you  to 
recall the setting for a specific computer. 
Press  the  MENU  button  to...

5
Computer Input
VacantValues  of  “Total  dots”, 
“Horizontal”, “Vertical”, 
“ D i s p l a y   a r e a   H ” ,   a n d 
“Display area V”.
Close this dialog box.
To store adjusted data To clear adjusted data
This Mode has stored 
parameters.
Move  the  red  frame  pointer 
t o   t h e   d e s i r e d   i t e m   a n d 
press the SELECT button.
Use the Point ◄► buttons to adjust the horizontal area 
displayed by this projector. Display area H
Use the Point ◄► buttons to adjust the vertical area...

6
Computer Input
Move  the  red  frame  pointer  to 
the  desired  image  mode  and 
press the SELECT button.
The selected image mode is check marked.
Image Select Menu
Normal picture mode preset on the projector. Standard
Picture mode with improved halftone for graphics.Real
For  the  image  projected  on  a  blackboard.  See  above  for 
further description.Blackboard(Green)
Image Select Menu icon
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 
Image Mode Selection 
Image 4
For  viewing...

7
Computer Input
Use the Point ◄► buttons 
to adjust the setting value.
Move the red frame 
pointer to the desired 
item and then press 
the SELECT button.
Image Adjust Menu
Image Adjust Menu icon
Selected Image mode
Image Adjustment
Reset
Press the MENU button to display the On-Screen Menu. 
Use the Point 
◄►buttons to move the red frame pointer 
to the Image Adjust Menu icon.1
2Use the Point ▲▼ buttons to move the red frame pointer 
to the desired item and then press the SELECT button 
to display...

8
Computer Input
Store
Exit the Image Adjust Menu.
Quit
Store icon
To store the adjusted data, select Store and press the 
SELECT button. Use the Point 
▲▼buttons to select one 
from Image 1 to 4 and press the SELECT button. 
A confirmation box appears and then select [Yes]. Stored 
data can be called up by selecting an “Image (1–4)” in the 
Image Mode Selection on page 36.Image Mode Menu
Move  the  red  frame 
pointer  to  an  image 
i t e m   t o   b e   s e t   a n d 
t h e n   p r e s s   t h e...

9
Computer Input
Select Digital zoom +. The On-Screen Menu disappears and 
“D.  zoom  +”  appears.  Press  the  SELECT  button  to  expand 
the  image  size.  Use  the  Point 
▲▼◄►  buttons  to  pan  the 
image. The  Panning  function  can  work  only  when  the  image 
is larger than the screen size.
A  projected  image  can  be  also  expanded  by  pressing  the 
D.ZOOM + button on the remote control. 
To  exit  the  Digital  zoom  +/–  mode,  press  any  button  except 
the D.ZOOM  +/–  buttons,...

40
Choose  Video  by  pressing  the  INPUT  button  on  the  top 
control or the VIDEO button on the remote control.
Before  using  these  buttons,  correct  input  source  should  be 
selected through menu operation as described below.
Use  the  Point ▲▼  buttons  to  move  the  red  arrow 
pointer  to  Video  and  then  press  the  SELECT  button  to 
display the Source Select Menu.
1
2
Move  the  pointer  to 
Video  and  press  the 
SELECT button.
VIDEO
Move  the  pointer  to  the  source 
that  you...