Eiki Lc-Xb42n Multimedia Projector Owners Manual

Multimedia ProjectorOwner's Manual
LC-XB42NMODEL
 Network Supported 
□		Wireless LAN
        IEEE802.11b/g
□		 Wired LAN
        100-Base-TX/10-Base-T
 Memory Viewer 
□		SD Card Memory Viewer  
*	 Refer to the owner
’s manuals below for details  
         about network and memory viewer function.
■			Network Set-up and Operation
■				Memory viewer 

2 


Features and Design
This Multimedia Projector is designed with the most advanced technology \
for portability, durability, and ease of use. 
This projector utilizes built-in multimedia features, a palette of 16.77\
 million colors, and matrix liquid crystal display 
(LCD) technology.
◆ Compact Design
 This projector is designed compact in size and weight. 
It  is  easy  to  carry  and  installed  anywhere  you  wish  to 
use.
◆ Capable of 60-degree Projection
 This projector is capable of...


Table of Contents
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its  respective 
corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .3
Table of Contents  .  .
  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
To the Owner  .  .
  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Safety Instructions  .  .
  .  .  .  .  .  .  .  .  .  .  .  ....

5
To the Owner
CAUTION: TO  REDUCE  THE  RISK  OF  ELECTRIC 
SHOCK,  DO  NOT  REMOVE  COVER  (OR 
BACK) .

  NO  USER-SERVICEABLE  PARTS 
INSIDE  EXCEPT  LAMP  REPLACEMENT  . 
R E F E R   S E R V I C I N G   T O   Q U A L I F I E D 
SER VICE PERSONNEL

 .
THIS  SYMBOL  INDICATES  THAT  DANGEROUS 
VOLTAGE  CONSTITUTING  A  RISK  OF  ELECTRIC 
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS  SYMBOL  INDICATES  THAT  THERE  ARE 
IMPORTANT  OPERATING  AND  MAINTENANCE 
I N S T R U C T I O N S   I N   T H E   O W N E...

6
Safety Instructions
All  the  safety  and  operating  instructions  should  be  read 
before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them 
for later use. Unplug this projector from AC power supply 
before  cleaning.  Do  not  use  liquid  or  aerosol  cleaners. 
Use a damp cloth for cleaning.
F o l l o w  a l l  w a r n i n g s  a n d  i n s t r u c t i o n s  m a r k e d  o n  t h e 
projector.
For  added  protection  to  the  projector  during  a...

7
Safety Instructions
Openings  in  the  cabinet  are  provided  for  ventilation.  To 
ensure  reliable  operation  of  the  product  and  to  protect  it 
from  overheating,  these  openings  must  not  be  blocked 
or covered. 
 CAUTION
Hot  air  is  exhausted  from  the  exhaust  vent.  When  using 
or  installing  the  projector,  the  following  precautions 
should be taken. 
–  Do not put any flammable object or spray can near the 
projector

, hot air is exhausted from the air vents.
–  Keep the...

8
Safety Instructions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe 
accident or fire hazard.
This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen as 
shown in the figure below.
Bottom 
Downward (Usual)Front 
DownwardBottom 
UpwardFront 
Upward
Installing the Projector in Proper Directions
Avoid positioning the projector as described below when installing.
Positioning...

9
Compliance
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful 
interference  in  a  residential  installation.  This  equipment  generates,  uses,  and  can  radiate  radio  frequency 
energy,  and  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause...

10
 Kensington Security Slot
 This  slot  is  for  a  Kensington  lock  used  to  deter 
theft of the projector.
 *  Kensington  is  a  registered  trademark  of ACCO  Brands 
Corporation.
Bottom Back
① Infrared Remote Receiver
②  wIRELESS Indicator
③  Focus Ring 
④  Projection Lens  　
⑤ Zoom Lever
⑥  Slide Shutter
⑦ Top Controls and Indicators
⑧ Air Intake Vent
⑨ Exhaust vent 
⑩ Speaker
⑪  Air Intake Vent (back and bottom)
⑫  Terminals and Connectors
⑬  Power Cord Connector
⑭  SD Card Slot
⑮  LAN...