Eiki Lc-Xb42 Multimedia Projector Owners Manual

61

Appendix
 The image is distorted or runs off .  – Check "PC adjustment" menu or "Screen" menu and adjust them.  
     (see pages 29,30, 34,35)
  PIN code dialog box appears  – PIN code lock is being set. Enter a PIN code (the “1234” or numbers 
 at start-up .    you have set).( See pages 19, 50,51)
  The Remote Control does  – Check the batteries.
 
 not work .   – Make sure no obstruction is between the projector and remote   
       control.
 
    – Make sure you are not too far...

62

wARNING :
High voltages are used to operate this projector  . Do not attempt to open the cabinet .
If problems still persist after following all operating instructions, co\
ntact the dealer where you purchased the 
projector or the service center. Specify the model number and explain about the problem. We will advise you 
how to obtain service.
This  symbol  on  the  nameplate 
m e a n s  t h e  p r o d u c t  i s  L i s t e d 
by  Underwriters  Laboratories 
I n c .   I t   i s   d e s i g n e d...

63

Appendix
Menu Tree
SVGA 1Mode 1Mode 2 - - - -
Auto PC Adj.
Total dotsHorizontalVertical
Display area HDisplay area VReset
Dynamic
RealBlackboard (Green)Image 1Image 2Image 3
Image AdjustContrastBrightnessColor temp.
Red
Gamma
Store
Quit
NormalTrue
Digital zoom –
Full 
0–630–63
Computer Input
PC Adjust
Mode 1Mode 2Mode 3Mode 4Mode 5
Image Select
High
0–63
0–15
Image 1Image 2Image 3Image 4
Screen
Quit
Yes/No
* 
Systems displayed in the System Menu vary depending on an input signal.
ResetYes/No...

64

Appendix
AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N
Video Input
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard (Green)
Image 1Image 2Image 3
Quit
Normal
0–630–63
Off
Setting
Image Select
System (2)
System (3)
Image AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15 0–15
Image 1
Screen
Yes/No
Quit
Image 4
LanguageSetting16 languages provided.
On/OffOn/Countdown off/Off Logo select
On/OffOn/Off
Off
On/OffAuto/High/Normal/Eco
Code 1 or Code 2...

65

Check the indicators for projector condition.                           \
         
• • • green.• • • red• • • off
• • • blinks green.
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator 
lights  yellow,  replace  the  projection  lamp  with  a  new  one  promptly.  Reset  the  lamp  replacement  counter  after 
replacing the lamp. See pages 57-58.
The projector is off. (The AC power cord is unplugged.)
The  projector  is  in  stand-by...

66

Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below 
and less than 140 MHz of Dot Clock for analog signal.
  When selecting these modes, PC adjustment can be limited.
ON-SCREEN DISPLA yRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC...

67

Appendix
Technical Specifications
Mechanical Information  
 Projector Type  Multi-media Projector 
  Dimensions (W x H x D) 
334 mm x 78 mm x 262 mm (Not including protrusion) 
  Net Weight  3.6 kg
 
  Feet Adjustment  0˚ to 8.9˚           
              
Panel Resolution  
 LCD Panel System  0.8” TFT Active Matrix type, 3 panels  
  Panel Resolution  1,024 x 768 dots
 
  Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)              
             
Signal Compatibility   
 Color System PAL,...

68

     Model No.
COMPONENT-VGA Cable                       : AH-98771 
SCART-VGA Cable                                  : AH-98881  
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. 
to the sales dealer.
Optional Parts
Accessories
 Owner’s Manual (CD-ROM)
   Quick Reference Guide 
  AC Power Cord
 
  Remote Control and Batteries                     
  VGA Cable 
   Serial Control Cable 
  PIN Code Label                     
  Soft...

69

Terminal : Mini DIN 8-PIN
SERVICE PORT CONNECTOR
R X D
-----
-----
GND
-----
-----
-----
1
2
3
4
5
6
7
8
COMPUTER IN 1 /COMPUTER IN 2 /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red (R/Cr) Input/ R Output   
Ground (Horiz.sync.)
 Green (G/Y) Input/ G Output
-----
 Blue (B/Cb) Input/ B Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
+5V Power / ---
  Horiz. sync. Input (Composite H/V sync.)
Ground...

70
Appendix
Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost 
the number and unable to operate the projector, contact the service station. 
PIN Code Number Memo
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
Put the label below (supplied) on in a prominent place of the 
projector's body while it is locked with a PIN code.
While the projector is locked with the PIN code.
PIN Code Lock No .
Logo PIN Code Lock No ....