Eiki Lc-Xb42 Multimedia Projector Owners Manual

31

Computer Input
VacantValues  of  “Total  dots”, 
“Horizontal”, “Vertical”, 
“ D i s p l a y   a r e a   H ” ,   a n d 
“Display area V”.
Close this dialog box.
To store adjusted data
To clear adjusted dataThis Mode has stored 
parameters.
Move  the  red  frame  pointer 
t o   t h e   d e s i r e d   i t e m   a n d 
press the SELECT button.
Use the Point ◄► buttons to adjust the horizontal area 
displayed by this projector.
Display area H
Use the Point ◄► buttons to adjust the vertical area...

32

Computer Input
Move  the  red  frame  pointer  to 
the  desired  image  mode  and 
press the SELECT button.
The selected image mode is check marked.
Image Select Menu
Normal picture mode preset on the projector.
Standard
Picture mode with improved halftone for graphics.
Real
For  the  image  projected  on  a  blackboard.  See  above  for 
further description.
Blackboard(Green)
Image Select Menu icon
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Image Mode Selection 
Image 4
For  viewing  with...

33

Computer Input
Use the Point ◄► buttons 
to adjust the setting value.
Move the red frame 
pointer to the desired 
item and then press 
the SELECT button.
Image Adjust Menu
Image Adjust Menu icon
Selected Image mode
Image Adjustment
Reset
Press the MENU button to display the On-Screen Menu. 
Use the Point ◄►buttons to move the red frame pointer 
to the Image Adjust Menu icon.
1
2Use the Point ▲▼ buttons to move the red frame pointer 
to the desired item and then press the SELECT button 
to display...

34

Computer Input
Store
Exit the Image Adjust Menu.
Quit
Store icon
To store the adjusted data, select Store and press the 
SELECT button. Use the Point ▲▼buttons to select one 
from Image 1 to 4 and press the SELECT button. 
A confirmation box appears and then select [Yes]. Stored 
data can be called up by selecting an “Image (1–4)” in the 
Image Mode Selection on page 32.
Image Mode Menu
Move  the  red  frame 
pointer  to  an  image 
i t e m   t o   b e   s e t   a n d 
t h e n   p r e s s   t h e...

35

Computer Input
Select Digital zoom +. The On-Screen Menu disappears and 
“D.  zoom  +”  appears.  Press  the  SELECT  button  to  expand 
the  image  size.  Use  the  Point ▲▼◄►  buttons  to  pan  the 
image. The  Panning  function  can  work  only  when  the  image 
is larger than the screen size.
A  projected  image  can  be  also  expanded  by  pressing  the 
D.ZOOM + button on the remote control. 
To  exit  the  Digital  zoom  +/–  mode,  press  any  button  except 
the D.ZOOM  +/–  buttons,...

36

Input Source Selection (Video, S-video)
Video Input
Choose  Video  by  pressing  the  INPUT  button  on  the  top 
control or the VIDEO button on the remote control.
Before  using  these  buttons,  correct  input  source  should  be 
selected through menu operation as described below.
P r e s s  t h e  M E N U  b u t t o n  t o  d i s p l a y  t h e  O n - S c r e e n 
Menu.    Press  the  Point  ◄►  buttons  to  move  the  red 
frame pointer to the Input Menu icon.
Press  the  Point ▲▼  buttons  to...

37

Video Input
Choose  Computer  2  by  pressing  the  INPUT  button  on  the 
top  control  or  press  the  COMPUTER  button  on  the  remote 
control.
Before  using  these  buttons,  correct  input  source  should  be 
selected through Menu operation as described below.
1
Use  the  Point ▲▼  buttons  to  move  the  red  arrow 
pointer  to  Computer  2  and  then  press  the  SELECT 
button.  
2
After  the  Source  Select  Menu  appeared  for  Computer 
2,  move  the  pointer  to  Component  or...

38

Video Input
Video System Selection
Press the MENU button to display the On-Screen 
Menu. Use the Point ◄► buttons to move the red 
frame pointer to the AV System Menu icon.
1
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use the Point ▲▼ buttons to move the red arrow 
pointer to the desired system and then press the 
SELECT button.
2
If  the  projector  cannot  reproduce  proper  video  image, 
select  a  specific  broadcast  signal  format  from  among  PAL, 
SECAM, NTSC, NTSC 4.43,...

39

Video Input
Move the red frame pointer to 
the desired image mode and 
press the SELECT button.
The selected image mode is check marked.
Image Select Menu
Standard
Cinema
Blackboard(Green)
For viewing with the user preset image mode in the Image 
Adjust Menu (pp. 40–41).
Image1–4
Image Select Menu icon
Select  the  desired  image  mode  from  among  Dynamic, 
Standard,  Cinema,  Blackboard  (Green),  Image  1,  Image  2, 
Image 3, and Image 4 by pressing the IMAGE button on the 
remote control....

40

Video Input
Image Adjustment
Press the MENU button to display the On-Screen Menu. 
Use the Point ◄► buttons to move the red frame pointer 
to the Image Adjust Menu icon.
1
2Use  the  Point ▲▼  buttons  to  move  the  red  frame 
pointer to the desired item and then press the SELECT 
button  to  display  the  adjustment  dialog  box.  Use  the 
Point ◄► buttons to adjust the setting value.
Press the Point ◄ button to decrease the contrast; press the 
Point ► button to increase the contrast (from 0 to...