Eiki Lc-Xb42 Multimedia Projector Owners Manual

41

Video Input
Use  the  Point ◄►  buttons  to  adjust  the  gamma  value  to 
obtain a better balance of contrast (from 0 to 15).
Gamma
Press  the  Point ◄  button  to  decrease  the  sharpness  of  the 
image;  press  the  Point ►  button  to  increase  the  sharpness 
of the image (from 0 to 15).
Sharpness
An  interlaced  video  signal  can  be  displayed  in  progressive 
mode. Select one of the following options.
 Off  ..........  Disabled.
  L1  ..........  For an active picture.
  L2  .............

42

Video Input
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Normal
Screen Size Adjustment
Screen MenuPress  the  MENU  button  to  display  the  On-Screen 
Menu.  Use  the  Point ◄►  buttons  to  move  the  red 
frame pointer to the Screen Menu icon.
1
Use  the  Point ▲▼  buttons  to  move  the  red  frame  
pointer  to  the  desired  function  and  then  press  the 
SELECT button.
2
Provide the image at the 4:3 normal video aspect ratio....

43

Language
The  language  used  in  the  On-Screen  Menu  is  available  in 
English,  German,  French,  Italian,  Spanish,  Portuguese, 
Dutch,  Swedish,  Finnish,  Polish,  Hungarian,  Romanian, 
Russian, Chinese, Korean, and Japanese.
Set  the  red  frame 
pointer  to  the  item 
a n d   p r e s s   t h e 
SELECT button.
Press the SELECT button 
a t   L a n g u a g e ,   t h e n   t h e 
Language Menu appears.
Setting Menu (Language)
Setting Menu icon
Setting
Setting
Auto setup
This  function...

44

Setting
Display
Blue back
When  this  function  is  “On,”  a  blue  image  is  displayed  while 
the input signal is not detected. 
Keystone
T h i s   f u n c t i o n   i s   u s e d   t o   s t o r e   o r   r e s e t   t h e   k e y s t o n e 
correction  when  the  AC  power  cord  is  unplugged.  Use  the 
Point ◄► buttons to switch between each option.
  Store  ........  Keep  the  keystone  correction  even  when  the 
AC power cord is unplugged.
  Reset  .......  Release the keystone...

45

Setting
Select [Yes] to capture 
the projected image. 
Select [Yes] to 
stop capturing.  
Capture
Logo (Logo and Logo PIN code lock settings)
Logo select
This  function  allows  you  to  customize  the  screen  logo  with 
Logo select, Capture, and Logo PIN code lock functions.
Note:
  • When  “On”  is  selected  in  the  Logo  PIN  code  lock 
function,  Logo  select  and  Capture  functions  cannot  be 
selected.
Capture
This  function  enables  you  to  capture  an  image  being 
projected  to...

46

Logo PIN code lock
Setting
This  function  prevents  an  unauthorized  person  from 
changing the screen logo.
 Off  ............  The screen logo can be changed freely from 
the Logo Menu (p.45).
  On  ............  The screen logo cannot be changed without 
a Logo PIN code.
If  you  want  to  change  the  Logo  PIN  code  lock  setting, 
press  the  SELECT  button  and  the  Logo  PIN  code  dialog 
box  appears.  Enter  a  Logo  PIN  code  by  following  the 
steps below. The initial Logo PIN...

47

Setting
Ceiling 
Rear 
Ceiling
When  this  function  is  set  to  “On,”  the  picture  will  be  top/
bottom  and  left/right  reversed.  This  function  is  used  to 
project the image from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture will be left/right 
reversed.  This  function  is  used  to  project  the  image  from 
rear of the screen.
Input search
This  function  detects  the  input  signal  automatically.  When 
a  signal  is  found,  the  search  will...

48

Setting
Power management
Time left before Lamp is off.
Power management
For  reducing  power  consumption  as  well  as  maintaining 
the  lamp  life,  the  Power  management  function  turns  off  the 
projection lamp when the projector is not operated for a certain 
period.
If  the  input  signal  is  interrupted  and  no  button  is  pressed  for 
more  than  30  seconds,  the  timer  display  with  “No  signal” 
appears.  It  starts  the  countdown  until  the  lamp  is  turned  off. 
Use the...

49

Setting
This function allows you to change brightness of the screen.
Auto ........... The brightness according to the input signal 
(between High and Eco mode).
High ...........  Brighter than the Normal mode.
Normal  .......  Normal brightness 
Eco ............  Lower brightness reduces the lamp power 
consumption and extends the lamp life.
Lamp control 
Remote control
This  projector  provides  two  different  remote  control  codes; 
the  factory-set,  initial  code  (Code  1)  and  the...

50

Setting
Key lock
Key lockSecurity (Key lock and PIN code lock)
PIN code lockPIN code lock
This  function  locks  the  top  control  and  remote  control 
buttons to prevent operation by unauthorized persons. .....  Unlocked.
  .....  Lock  the  operation  of  the  top  control.  To 
unlock, use the remote control.
  .....  Lock  the  operation  of  the  remote  control.    
To unlock, use the top control.
If the top control accidentally becomes locked and you do 
not have the remote control nearby...