Eiki Eip-3500 Dlp Projector Owners Manual
Here you can view all the pages of manual Eiki Eip-3500 Dlp Projector Owners Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
67 Optional accessoryLamp unit AH-35001Removing and Installing the Lamp Unit Info •Ensure the lamp unit is removed using the handle. Ensure the glass surface of the lamp unit or the inside of the projector are not touched. •To avoid injury to yourself and damage to the lamp, ensure to carefully follow the steps below. •Do not loosen other screws except for the lamp unit cover and lamp unit. 1Press on the projector or on the remote control to put the projector into standby mode. •Wait until the cooling...
Page 72
68 4Remove the lamp unit. •Loosen the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow. At this time, keep the lamp unit horizontal and do not tilt it. 5Insert the new lamp unit. •Press the lamp unit firmly into the lamp unit compartment. Fasten the securing screws. 6Replace the lamp unit cover. •Align the lamp unit cover and slide it to close. Then tighten the user service screw to secure the lamp unit cover. Info •If the lamp unit and lamp...
Page 73
69 Note •This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how to change display modes can be found in your notebook computer’s operation manual. •When this projector receives 640 × 350 VESA format VGA signals, “640 × 400” appears on the screen. •When projecting the RGB interlace signal using INPUT 1/2 with “Signal Type” set...
Page 74
70 Troubleshooting Check •Projector power cord is not plugged into the wall outlet. •Power to the external connected devices is off. •The selected input mode is wrong. •The AV MUTE function is working. •Cables incorrectly connected to rear panel of the projector. •Remote control batteries have run out. •External output has not been set when connecting notebook computer. •The lamp unit cover is not installed correctly. •Cables incorrectly connected to the rear panel of the projector. •“Bright” is set to...
Page 75
71 CheckProblemPage Picture is green on INPUT 1 (COMPONENT)/ INPUT 2 (COMPONENT). Picture is pink (no green) on INPUT 1 (RGB)/ INPUT 2 (RGB). Picture is too bright and whitish. The cooling fan becomes noisy. The lamp does not light up even after the projector turns on. The lamp suddenly turns off during projection. The image sometimes flickers. The lamp takes a long time to turn on. Picture is dark.•Change the input signal type setting. •Image adjustments are incorrectly set. •When temperature inside the...
Page 76
72 Specifications DLPTM Projector EIP-3500 NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/ DTV480I/DTV480P/DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I Single Chip Digital Micromirror Device TM (DMDTM) by Texas Instruments Panel size: 0.7 No. of dots: 786,432 dots (1,024 [H] × 768 [V]) 1.5 × electric zoom/focus lens, F2.0–2.5, f = 21.3–31.6 mm 275 W DC lamp 15-pin mini D-sub connector Y: 1.0 Vp-p, sync negative, 75 Ω terminated P B: 0.7 Vp-p, 75 Ω terminated P R: 0.7 Vp-p, 75 Ω terminated 750 TV...
Page 77
73 Glossary Aspect Ratio Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4:3. There are also wide images with an aspect ratio of 16:9 and 21:9. Auto Sync Optimizes projected computer images by auto- matically adjusting certain characteristics. Background Initial setting image projected when no signal is being output. Border Projects a 4:3 image fully within a 16:9 screen by keeping the aspect ratio at 4:3. Clock Clock adjustment is used to adjust vertical...
Page 78
743 RCA to 15-pin D-sub cable............................... 25 AC socket ............................................................. 29 Adjustment buttons.............................................. 40 Aspect ratio.....................................................36,37 AUDIO INPUT terminal........................................ 23 AUDIO OUTPUT terminal.................................... 28 Auto Focus......................................................32,57 AUTO FOCUS...
Page 79
EIP-3500 OWNERS MANUAL EIKI INDUSTRIAL CO., LTD. A-Key to better communications U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] Canada EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON,...