Eiki Eip-3500 Dlp Projector Owners Manual

17
Page 30
4.Adjust the angle
5.Adjust the focus and the zoom
Page 32
7.Turn the Power off
Page 29
6.Select the INPUT mode
Page 33
HEIGHT ADJUST button
• •• •
•This projector is equipped with an “Auto Keystone
Correction” function that automatically corrects
any trapezoidal distortion within the projected
image. The correction is made automatically
provided the vertical incline or decline is within 12
degrees.
1  1  1  1 
1 Bring the projected image into focus
• •• •
•
When the projector is turned on,...

18
Storing the Projector
Lens cap
Fixing band
Info
Info
How to Use the
Storage Case
When storing the projector, attach the lens
cap to the lens, and place it in the supplied
storage case.
1Open the cover of the storage
case.
2Place the projector into the stor-
age case.
•Ensure the projector has cooled down
sufficiently before placing it in the case.
•Ensure the lens cap is attached to the
lens for protection.
•Place the projector into the storage
case with the lens facing the
handle.
•Ensure the...

19
Setting up the Projector
Position the projector perpendicular to the screen with the projector’s feet flat and level to achieve an
optimal image.
Note
•The projector lens should be centered in the middle of the screen. If the horizontal line passing through
the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
•For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling
directly on the screen washes...

20
Projecting a Reversed Image
Projection from behind the Screen
■Place a translucent screen between the projector and the audience.
■Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page 59.)
Projection Using a Mirror
■Place a mirror (normal flat type) in front of the lens.
■When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode”
menu. (See page 59.)
■When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See...

21
INPUT/OUTPUT Terminals and Connectable Main Equipment
INPUT 1, 2 terminalConnecting the computer. (See 
page 23.)
Connecting video equipment with 
component output terminal (DVD 
player, DTV decoder, DVD recorder 
with hard disc, etc.). (See page 25.)
INPUT 3 terminalConnecting video equipment without 
S-video output terminal. (See page 26.)
AUDIO INPUT 1, 2 terminalConnecting an audio cable. (Shared 
audio input terminal for INPUT 1 and 
2.) (See pages 23 and 25.)
INPUT 4 terminalConnecting video...

22
Terminal on the
projector
INPUT 1, 2
AUDIO INPUT
INPUT 1, 2
INPUT 1, 2
INPUT3
INPUT4
AUDIO INPUT
AUDIO INPUT
AUDIO OUTPUT
OUTPUT Equipment
Computer
Audio-visual
equipment
Amplifier
Monitor
Terminal on
connected equipment
RGB
output terminal
Audio
output terminal
Component
video
output terminal
Terminal
for using
the
dedicated
cable
Video
output terminal
S-video
output terminal
Audio
output terminal
Terminal
for using
the
dedicated
cable
Audio
input terminal
RGB input
terminal
Cable
RGB cable...

23
Connecting to a Computer
Before connecting, ensure the power cord of the projector from the AC outlet is unplugged,
and that the devices to be connected are turned off. After making all connections, turn on the
projector and then the other devices. When connecting a computer, ensure that it is the last
device to be turned on after all the connections are made.
Ensure the operation manuals of the devices to be connected have been read before making connections.
To audio output terminal
To RGB output...

24
Connecting to a Computer
Using the Remote Control as the Wireless Computer Mouse
When connecting the projector and the computer with the supplied RGB cable and USB
cable (see page 23), you can use the remote control as the computer mouse.
MOUSE/Adjustment button ('/"/\/|)
R-CLICK button
L-CLICK button
The mouse pointer can be operated in
the following way after it is connected.
■When moving the cursor
Press MOUSE/Adjustment button ('/"/
\/|).
■When left-clicking
Press 
.
■When...

25
Connecting to Video Equipment
The projector has a COMPUTER-RGB/COMPONENT terminal, an S-VIDEO terminal and VIDEO terminal for
video input. Refer to the listed illustrations on how to connect audio-visual equipment.
The image quality is highest in order of the component signal, the RGB signal, the S-video signal and the
video signal. If your audio-visual equipment has a component output terminal or RGB output terminal, use the
COMPUTER-RGB/COMPONENT terminal (INPUT 1 or INPUT 2) on the projector for...

26
When connecting video equipment with video output terminal
When connecting video equipment with S-video output terminal
Note
•ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input.
•When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com-
mercially available cable that fits in the projector terminal you want to connect.
ø3.5 mm minijack to RCA
audio cable (commercially
available) To audio output terminal
To S-video output...