Eiki Eip-3500 Dlp Projector Owners Manual

57
Auto Focus Setting
When the projector is turned on, the focus pat-
tern is displayed automatically and the focus is
adjusted automatically.
Menu operation  Page 42
Example: “Options2” screen menu
Description of Auto Focus
Note
•Auto Focus can be performed over a range of
40 to 100 inches.
•The ability to adjust the focus automatically de-
pends on the screen conditions and the sur-
rounding brightness.
•When the distance between the projector and
the screen does not change (fixing installation),
it is...

58
Setting the Audio Output
Type
This function determines whether the audio level
output from the AUDIO OUTPUT terminal is fixed
or variable by linking with VOLUME.
Menu operation  Page 42
Example: “Options2” screen menu
Description of Audio Out Settings
Info
•When “Audio Out” has been set to “VAO”, first make
sure to lower the volume of the projector before
turning the power on or off and when switching the
input.
Description
Audio output that does not vary in
strength with the volume level of the...

59
Reversing/Inverting Pro-
jected Images
This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.
Menu operation  Page 42
Example: “Options2” screen menu
Description of PRJ Modes
Note
•This function is used for the reversed image and
ceiling-mount setups. (See page 20.)
Description
Normal image
Inverted image
Reversed image
Reversed and inverted image
Selectable items
Front
Ceiling + Front
Rear
Ceiling + Rear...

60
Monitor Output Settings
When the Monitor Out has been set to “Enable”,
the monitor output is activated and power is con-
sumed even in the standby mode. It is recom-
mended that the Monitor Out be set to “Disable”
when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
Menu operation  Page 42
Example: “Options2” screen menu
Description of Monitor Out
Description
The monitor output function is activated
even if the projector is in standby mode.
The monitor...

61
Returning to the Default
Settings
This function allows you to initialize the settings
you have made in the projector.
Menu operation  Page 42
Example: “Options2” screen menu
Note
About the network settings
•“Projector” and “IP Address” on the “Options2”
menu and the network setting items described
on the “SETUP GUIDE” are initialized.
The following items or menu cannot be initialized.
•“Fine Sync” menu
Special Modes
•“Options1” menu
Lamp Timer (Life)
System Lock
•“Language” menu
Confirming the Network...

62
Selecting the On-screen
Display Language
The projector can switch the on-screen display
language among 11 languages: English, German,
Spanish, Dutch, French, Italian, Swedish, Portu-
guese, Chinese, Korean or Japanese.
Example: “Language” screen menu for
INPUT 1 (RGB) mode
1Press  on the remote control.
•The “Picture” menu will be displayed.
2Press \ or | to select the “Lan-
guage” menu icon (
).
•The “Language” menu will be displayed.
3Press ' or " to select the desired
language, and then...

63
Cleaning the lens
■Use a commercially available blower or lens clean-
ing paper (for glasses and camera lenses) for clean-
ing the lens. Do not use any liquid type cleaning
agents, as they may wear off the coating film on the
surface of the lens.
■As the surface of the lens can easily get damaged,
ensure not to scrape or hit the lens.
Cleaning the exhaust and intake vents
■Use a vacuum cleaner to clean dust from the ex-
haust vent and the intake vent.
Info
•If you want to clean the air vents during...

64
Power indicator
Lamp indicator
Temperature warning indicator
Maintenance Indicators
Maintenance Indicators
■The warning lights on the projector indicate problems inside the projector.
■If a problem occurs, either the temperature indicator or the lamp indicator will illuminate red, and
the projector will enter the standby mode. After the projector has entered the standby mode, follow
the procedures given below.
About the temperature warning indicator
If the temperature inside the projector increases,...

65
Maintenance indicator
Problem
Cause Possible solution
Temperature
warning
indicatorNormalAbnormal
OffRed on
(Standby)The internal
temperature is
abnormally high. Abnormal
• Blocked air intake•Relocate the projector to an area
with proper ventilation (see page
7).
•Cooling fan break-
down
•Internal circuit failure
•Clogged air intake•Take the projector to your nearest
EIKI Authorized Projector Dealer
or Service Center for repair.
•Clean the exhaust and intake
vents. (See page 63.)
Lamp
indicator
Red...

66
Lamp
■It is recommended that the lamp unit (optional: AH-35001) be replaced when the remaining lamp life
becomes 5% or less, or when you notice a significant deterioration in the picture and color quality.
The lamp life (percentage) can be checked with the on-screen display. See page 50.
■ Purchase a replacement lamp unit of type AH-35001 from your place of purchase, nearest EIKI Au-
thorized Dealer or Service Center.
Caution Concerning the Lamp
■This projector utilizes a pressurized mercury lamp. A...