Eiki Eip 1500t Dlp Dlp Projector Owners Manual

18
Setting Up the Projector
Projecting a Reversed Image
Projection from behind the Screen
■Place a translucent screen between the projector and the audience.
■ Reverse the image by setting “Rear” in the “PRJ Mode” menu. \
(See page  52.)
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of the lens.
■ When the translucent screen is placed between the mirror and audience, s\
et to “Front” in the “PRJ Mode”
menu. (See page  52.)
■ When the mirror is placed on the audience side, set to...

19
INPUT Terminals and Connectable Main Equipment
INPUT 5/DIGITAL terminalConnecting video equipment with 
component output terminal (DVD 
player, DTV decoder, DVD recorder 
with hard disc, etc.). (See pages 22, 
23 .)
Connecting the computer. (See 
pages  25, 26 .)INPUT 3 terminalConnecting video equipment with S-video 
output terminal (VCR, DVD player, etc.).
(See page  24.)
INPUT 1, 2 terminalConnecting video equipment with 
component output terminal (DVD 
player, DTV decoder, DVD recorder 
with hard...

20
Terminal on the
projector
INPUT 1, 2
INPUT 1, 2
INPUT 5/DIGITAL
INPUT 5/DIGITAL
INPUT 4
INPUT 4
INPUT 3
INPUT 3
RS-232C
Equipment
Audio-visual
equipment
Computer
Computer
T
erminal on
connected equipment
Component
video 
output
terminal
T erminal
for using
the
dedicated
cable
DVI output terminal
RGB output terminal
Video
output
terminal
T erminal
for using
the
dedicated
cable
S-video
output
terminal
T erminal
for using
the
dedicated
cable
RS-232C
terminal
Cable
Component cable (commercially...

21
Connecting to Video Equipment
Before connecting, ensure that you have unplugged the power cord of the \
projector from the
AC outlet and turned off the devices to be connected. After making all connections, turn on
the projector and then the other devices.
Ensure that you have read the owner’s manuals of the devices to be connected before making
connections.
When connecting the component video equipment to the component input ter\
minal on the
projector (INPUT 1 or INPUT 2)
Note
•When you connect...

22
When connecting the video equipment with RGB output terminal (INPUT 5)\
•Before connecting the cable, switch the digital input type switch to “\
VIDEO”.
INPUT 5 terminal
DVI to 15-pin D-sub adaptor(commercially available)
RGB output terminal
RGB cable
(commercially available)
DVD Player,etc.
4
32
Switch to “VIDEO”1
Connecting to Video Equipment
Note
•
For this connection, select “RGB” for “Signal Type” on the OSD menu or press  on the remote control.
(See page  48.)
EIP-1500T_E_P19_27.p65 5/24/05,...

23
DIGITAL terminal
DVI output terminal
DVI cable
(commercially available)
Switch to “VIDEO”DVD Player,etc.
2
3 1
Note
•
Select DIGITAL mode when connecting to video equipment with the digital output termina\
l. (See page
29 .)
When connecting the video equipment with DVI output terminal (DIGITAL INPUT)
•Before connecting the cable, switch the digital input type switch to “\
VIDEO”.
EIP-1500T_E_P19_27.p65 5/24/05, 9:22 AM
23 

24
When connecting video equipment with S-video output terminal (INPUT 3)\
When connecting video equipment with video output terminal (INPUT 4)
S-video cable
(commercially available)
S-video output terminal
INPUT 3 terminal
DVD Player,etc.
2
1
INPUT 4 terminal
Video output terminal
Video cable(supplied)
DVD Player,etc.
1
2
Connecting to Video Equipment
V
ideo cable
Supplied
accessory
Note
• When you connect video equipment with a 21-pin RGB output (Euro-scart)\
 to the projector, use a com-
mercially...

25
Connecting to a Computer
Connecting to a computer (INPUT 5)
•Before connecting the cable, switch the digital input type switch to “\
PC”.
RGB output terminal INPUT 5 terminal
RGB cable (commercially available)
DVI to 15-pin D-sub adaptor (commercially available)
Computer
4
32
Switch to “PC”1
Note
•Refer to “Computer Compatibility Chart” on page 
61 for a list of computer signals compatible with the projector. Use
with computer signals other than those listed may cause some of the func\
tions not to...

26
Connecting to a computer with DIGITAL RGB output Terminal (DIGITAL)
•Before connecting the cable, switch the digital input type switch to “\
PC”.
INPUT 5 terminal
DVI output terminal
DVI cable
(commercially available)
Switch to “PC”
Computer
2
3 1
Note
•
Select DIGITAL mode when connecting to digital output terminal of the computer. (See page  29.)
• Before switching “Digital input type switch” and connecting, ensur\
e to unplug the power cord of the pro-
jector from the AC outlet and turn off the...

27
Controlling the Projector by a Computer
When the RS-232C terminal on the projector is connected to a computer, the computer can be used to control
the projector and check the status of the projector.
When connecting to a computer using an RS-232C serial control cable
Note
•The RS-232C function may not operate if your computer terminal is not co\
rrectly set up. Refer to the
owner’s manual of the computer for details.
• See “RS-232C Specifications and Command Settings” on page 60 for d\
etails.
Info...