Eiki Eip 1500t Dlp Dlp Projector Owners Manual

8
Caution regarding usage of the projector
■When using the projector, be sure not to sub-
ject it to hard impact and/or vibration, as this
can result in damage. Take extra care with the
lens. If you are not to use the projector for a
long time, be sure to unplug the power cord
from the wall outlet, and disconnect any other
cables connected to it.
■Do not use the projector by holding the lens.
■
When you are not to use the projector for a long
time, or storing the projector, re-attach the lens
cap to the...

9
38Adjustment buttons 
(' /" /\ /| )
Select menu items and other 
settings.
29INPUT buttonSwitch input mode 1, 2, 3, 4, 
5 or DIGITAL.
30
10
5410
54
ZOOM-FOCUS buttonAdjust the projected image 
size or adjust the focus.
Temperature warning 
indicator Lamp indicator
10Power indicator
31
31
13Remote control sensor
HEIGHT ADJUST button Front adjustment foot 
(on the bottom of the projector)
38MENU buttonDisplay adjustment and 
setting screens.
39ENTER buttonSet items selected or 
adjusted on the...

10
About the Indicators on the Projector
Power indicator
Green on ...
 Normal (Standby)
Red on ...
 Normal (Power on)
Temperature warning indicator
Off ...
 Normal
Red on ...
The internal temperature is abnormally high. 
(See page 54.)
Lamp indicator
Green on ...
 Normal
Green blinks ...
 
The lamp is warming up or shutting down.
Red on ...
 The lamp has been shut down abnormally or 
needs to be changed. (See page 54.)
Part Names and Functions
EIP-1500T_E_P06_15.p654/25/05, 11:59 AM 10 

11
Projector (Rear View)
Using the Kensington Lock
•This projector has a Kensington Security Standard connector for use with\
 a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructi\
ons on how to use it to secure the
projector.
Numbers in  refer to the main pages in  this owner’s m anual where the topic is explained.
13Remote control sensor
28AC socketConnect the supplied 
power cord.
11Kensington Security 
Standard connector
31
537
Rear adjustment...

12
Remote Control
Adjustment buttons
(' /" /\ /| )
38
30
MENU button
Display adjustment and setting 
screens.
38
ON button
Turn the power on.
28
30ZOOM-FOCUS button
Adjust the projected image 
size or adjusting the focus.
29INPUT 3 button
29INPUT 5 button
34
34
44
RESIZE button
Switch the picture display
(STRETCH, SIDE BAR, etc.).
29DIGITAL INPUT button
PICTURE MODE button
Select the picture setting (Memory) 
stored in “Picture Mode” on the 
“Picture” menu.
28STANDBY button
Put the projector into...

13
Using the Remote Control
Inserting the Batteries
1Pull down the tab on the cover
and remove the cover towards
the direction of the arrow.
2Insert the included batteries
(two “AA” size).
•Insert the batteries making sure the po-
larities correctly match the 
 and 
marks inside the battery compartment.
3Insert the lower tab of the cover
into the opening, and lower the
cover until it clicks in place.
Incorrect use of the batteries may cause them to leak or explode. Please\
 follow the precautions below....

14
Quick Start
8  STANDBY button
3  ON button
7  KEYSTONE button
6, 7   Adjustment buttons
        ( '/" /\ /| )
6   ZOOM-FOCUS button
4  INPUT buttons,
    DIGITAL INPUT button
6   HEIGHT ADJUST button
3, 8   STANDBY-ON button
4   INPUT button
6 
 ZOOM-FOCUS button
6   
Adjustment buttons (' /" /\ /| )
Page 16
1.Place the projector facing a screen
Pages 21-28
Page 28
On the remote control
On the projector
This section shows the basic operation. For details, see the page descri\
bed below...

15
Page 29
4.Select the INPUT mode
6.Adjust the projector angle, focus and zoom
Select the “INPUT 3” using the INPUT button on the projector or th\
e INPUT 3 button on the remote control.
•
• •
•
• When pressing  on the projector, input mode switches in order of :
INPUT 1 INPUT 2 INPUT 3 INPUT 4INPUT 5DIGITAL
•
• •
•
•When using the remote control, press /////  to switch the INPUT mode.
On the remote
control
On the
projector "
" "
"
"  On-screen Display
5.Tu rn the video equipment on...

16
Setting Up the Projector
Position the projector perpendicular to the screen to achieve an optimal image.
Note
•The projector lens should be centered in the middle of the screen. If the horizontal line passing through
the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
•For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling
directly on the screen washes out the colors, making viewing difficult....

17
HL
Side View
Screen
Lens center
Screen Size and Projection Distance
The projection screen size varies according to the distance from the len\
s of the projector to the screen.
Install the projector so that projected images are projected onto the sc\
reen at the optimum size by referring
to the table below. Use the values in the table as a reference when installing the project\
or.
Picture (Screen) size Projection distance [L]
Diag. [χ
] Width Height Minimum [L1] Maximum [L2]
200 (508 cm) 443 cm (174)...