Dukane Projector 8933W User Manual

51
SCREEN menu
ItemDescription
SOURCE NAME (continued )(6) 
 The current name will be displayed on 
the first line. Use the ▲/▼/◄/► buttons 
and the ENTER or INPUT

 button to 
select and enter characters. To erase 1 
character at one time, press the RESET 
button or press the ◄ and INPUT button 
at the same time. Also if you move the 
cursor to DELETE or ALL CLEAR on 
screen and press the  ENTER or INPUT 
button, 1 character or all characters will 
be erased. The name can be a maximum 
of 16...

52
SCREEN menu
ItemDescription
C.C.
(Closed Caption) The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from...

53
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to execute 
the item, except for the items LAMP TIME and FILTER 
TIME. Then perform it according to the following table.
ItemDescription
AUTO SEARCH Using the ▲/▼ buttons turns on/off the automatic signal search 
function.
ON 
ó OFF
When the ON is selected, detecting no signal automatically cycles 
through input...

54
OPTION menu
ItemDescription
AUTO POWER  OFF Using the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes)  ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with  
no-signal or an unsuitable signal reaches at the set time, the 
projector lamp will be turned off. 
If one of the projector's buttons or the remote control buttons 
is...

55
OPTION menu
ItemDescription
LAMP TIME The lamp time is the usage time of the lamp, counted after the last 
resetting. It is shown in the OPTION menu.
Pressing the RESET button on the remote control or the ► button 
of the projector displays a dialog. 
To reset the lamp time, select the OK using the ► button.
CANCEL
 ð OK
• Please reset the lamp time only when you have replaced the lamp, 
for a suitable indication about the lamp.
• 
For the lamp replacement, see the section Replacing the lamp ( 65)....

56
OPTION menu
ItemDescription
MY BUTTON This item is to assign one of the following functions to 
MY BUTTON 
1/2 on the remote control (
 6).
(1)
  Use the ▲/▼ buttons on the MY BUTTON menu to select a MY 
BUTT

ON - (1/2) and press the ► or ENTER button to display the 
MY BUTTON setup dialog. 
(2)
  Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the ENTER or 

INPUT 
button to save the setting.
• COMPUTER IN1: Selects the input from COMPUTER IN1 port.
•...

57
OPTION menu
ItemDescription
MY BUTTON (continued )• PICTURE MODE: Changes the PICTURE MODE (

31).
•  FILTER RESET: Displays the filter time reset confirmation dialogue  ( 55).
•  TEMPLATE: Makes the template pattern selected to the 
TEMPLATE item (
 51) appear or disappear.
•  AV MUTE: Turns the picture and audio on/of f.
• 
 RESOLUTION: Turns on/off the RESOLUTION dialog 

(
42).
•  ECO MODE: Changes the ECO MODE ( 44).
•  SAVER MODE: Changes the SAVER MODE ( 44 ECO MODE).
MY SOURCE Using ▲/▼...

58
OPTION menu
ItemDescription
SERVICE
(continued)
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the 
DISABLE is selected, the automatic adjustment feature is disabled.
FINE  ó FAST 
ó DISABLE
   
FINE: Finer tuning including H.SIZE adjustment.
FAST:  Faster tuning, setting H.SIZE to prearranged data for the 
input signal.
• 
Depending on conditions, such as input image, signal cable to the 
projector, environment around the projector, etc., the automatic adjustment 
may not work...

59
OPTION menu
ItemDescription
SERVICE
(continued) REMOTE FREQ.
(1)
  Use the ▲/▼ button to change the projector's remote sensor 
frequency setting 
(
17).
1:NORMAL  ó 2:HIGH
(2)
  Use the ◄/► button to change the 
projector's remote sensor on or off. ON  ó OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to be on. 
If the remote control does not function correctly, disable either of them.
It's not possible to disable both options at the same time.
INFORMATION
Selecting this...

60
SECURITY menu
(continued on next page) This projector is equipped with security functions.
From the SECURITY menu, items shown in the table 
below can be performed.
To use SECURITY menu: User registration is required 
before using the security functions.
Enter to the SECURITY menu
1.  Press the ► button. The ENTER PASSWORD box will be displayed.  
2. 
 Use the ▲/▼/◄/► buttons to enter the registered password. 
    The factory default password is as follows.
    
    
    This password can be changed...