Dukane Projector 8933W User Manual

41
INPUT menu
ItemDescription
COMPUTER IN The computer input signal type for 
COMPUTER IN1 and IN2 ports 
can be set.
(1) 
 Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
(2)  Use the ◄/► buttons to select 
the computer input signal type.
     (COMPUTER IN1) AUTO  ó SYNC ON G OFF
     (COMPUTER IN2) AUTO  ó SYNC ON G OFF 
ó MONITOR OUT
• Selecting the 
AUTO mode allows you to input a sync on G signal 
or component video signal from the port (
 12).
• In the AUTO mode, the picture may be...

42
INPUT menu
ItemDescription
RESOLUTION The resolution for the COMPUTER IN1 and COMPUTER IN2 input 
signals can be set on this projector.
(1) 
 In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button. 
The RESOLUTION menu will be  
displayed.
(2) 
 In the RESOLUTION menu select the 
resolution you wish to display using 
the ▲/▼ buttons. 

 
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3) 
 Pressing the ► or ENTER button when 
selecting a STANDARD...

43
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
 KEYSTONEUsing the ◄/► buttons corrects the vertical keystone distortion.
Shrink the bottom of the image  ó Shrink the top of the image
• The adjustable range of this function will vary among inputs. For 
some input, this function...

44
SETUP menu
ItemDescription
ECO MODE Using the ▲/▼ buttons switches the ECO MODE. 
NORMAL  ó ECO 
ó INTELLIGENT ECO
ó SAVER
• When the ECO is selected, acoustic noise and screen brightness 
are reduced.
• When INTELLIGENT ECO is selected, the brightness of the 
lamp changes according to the level of the input signal. The lamp 
becomes brighter when the input signal level is high and darker 
when the level is low. If dark images are projected continuously, the 
brightness of the lamp may increase to...

45
ItemDescription
STANDBY MODE Using ▲/▼ buttons switches the standby mode setting between 
NORMAL and SAVING. 
NORMAL  ó SAVING
When SAVING is selected, the power consumption in the standby 
mode is lowered with some functional restriction as below:
• The RS-232C communication control is disabled except turning 
the projector on and changing the STANDBY MODE setting.
• When SAVING is selected, STANDBY setting of AUDIO SOURCE 
(
 46) is invalid, no signal is output from 
AUDIO OUT port and no 
sound...

46
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table 
below can be performed. Select an item using the 
▲/▼ cursor buttons, and press the ► cursor button 
or the ENTER button to execute the item. Then 
perform it according to the following table.
 
ItemDescription
VOLUME Using the ◄/► buttons adjusts the volume.     Low 
ó High
SPEAKER Using the ▲/▼ buttons turns on/off the built-in speaker.
ON  ó OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE While the image...

47
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
LANGUAGE Using the ▲/▼/◄/► buttons switches the OSD (On Screen 
Display) language.
ENGLISH  ó FRANÇAIS 
ó DEUTSCH 
ó  ESPAÑOL
       
   (shown in the LANGUAGE dialog)   
Press the ENTER or INPUT button to save the language...

48
SCREEN menu
ItemDescription
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected. MyScreen  ó ORIGINAL 
ó OFF
       
MyScreen :  Screen can be registered by the MyScreen item (below).ORIGINAL :  Screen preset as the standard screen.
OFF :  Plain black screen.
• To avoid remaining as an afterimage, the STAR
T UP screen will 
change to the AUTO BLANK screen after several minutes. 
• When...

49
SCREEN menu
ItemDescription
MyScreen Lock Using the ▲/▼ buttons turns on/off the MyScreen lock function.
ON  ó OFF
When the ON is selected, the item MyScreen is locked. Use this 
function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in SECURITY menu (
 61).
MESSAGE Using the ▲/▼ buttons turns on/off the message function.
ON  ó OFF
When the ON is selected, the following message function works. “AUTO IN PROGRESS” while...

50
SCREEN menu
ItemDescription
SOURCE NAME Each input port for this projector can have a name applied to it.
(1) 
 Use the ▲/▼ buttons on the SCREEN menu to select SOURCE 
NAME and press the ► or ENTER button.  
The SOURCE NAME menu will be displayed.
(2) 
 Use the ▲/▼ buttons on the SOURCE 
NAME menu to select the port to be 
named and press the ► button. The 
SOURCE NAME dialog will be displayed. 
Right side of the menu is blank until a 
name is specified.
(3) 
 Select an icon you would like to assign...