Dukane Projector 6430 User Manual

54
English ...
User Controls
 CEILING FRONT:
When selected, the image will turn upside down.
 CEILING REAR
This is the default selection. The image will appear reversed in 
upside down position.
ORIENTATION
DESKTOP FRONT
CEILING FRONT
DESKTOP REAR
CEILING REAR
  HDMI SETTINGS
Use this feature to set HDMI1/MHL or HDMI2
HDMI SETTINGS
AUTO
COMPUTER SELECT
EXIT MOVE
AUDIO SELECT VIDEO LEVEL
HDMI1
HDMI1 HDMI2
 VIDEO LEVEL:  Select “AUTO” to automatically detect 
video level. If automatic detection may not...

55... English
User Controls
 AUDIO SELECT: Use this function to select the audio souce 
from “HDMI1/MHL ”, “HDMI2”or “COMPUTER ”. 
AUDIO SELECT
HDMI1/MHLCOMPUTER
AUDIO SELECT
HDMI2COMPUTER
  MUTE
 Choose “ON” to turn mute on. 
 Choose “OFF” to turn mute off. 
MUTE
OFF
ON
  VOLUME
  Press the  button to decrease the volume.
  Press the  button to increase the volume.
VOLUME
EXIT ADJUST
EXIT 

56
English ...
User Controls
SCREENIMAGE SETTINGOPTIONS
GENERAL SIGNAL
PHASE
CLOCK
H. POSITION
V. POSITION
COMPUTERSELECT
EXITMOVE MOVE
ADVANCED
 
PHASE 
Synchronize the signal timing of the display with the graphic card. 
If the image appears to be unstable or flickers, use this function to 
correct it.
PHASE
EXIT ADJUST
EXIT
  CLOCK
Change the display data frequency to match the frequency of 
your computer’s graphic card. Use this function only if the image 
appears to flicker vertically.
CLOCK
EXIT...

57... English
User Controls
 H. POSITION
 Press the  button to move the image left.
 Press the  button to move the image right. 
H. POSITION
EXIT ADJUST
EXIT
  V. POSITION
 Press the  button to move the image down.
 Press the  button to move the image up. 
V. POSITION
EXIT ADJUST
EXIT 

58
English ...
User Controls
SCREENIMAGE SETTINGOPTIONS
GENERAL SIGNAL
LOGO
NETWORK
CLOSED CAPTION
SECURITY
TEST PATTERN OFF
COMPUTER SELECT
EXIT
MOVE MOVE
ADVANCED
OFF
OFF
  LOGO
Use this function to display the startup screen (NEC logo).
 ON: Displays the NEC logo.
 OFF: Not display the NEC logo.
LOGO
OFFON
  NETWORK
Please see the pages 64-68.
 CLOSED CAPTION
Use this function to enable closed caption and activate the closed 
caption menu. Select an appropriate closed captions option: OFF, 
CC1,...

59... English
User Controls
 SECURITY
 OFF: Choose “OFF” to be able to switch on the projector 
without password verification.
 ON: Choose “ON” to use security verification when turning on the projector.
SECURITY
OFFON
 
ENTER CURRENT SECURITY CODE
SECURITY KEYWORD
EXIT
ENTER INVALID-KEYWORD TOO SHORT
First Time: 
1. The default password :  puqt
2. Use the remote to enter your password, and then press  ENTER to confirm your password.
 TEST PATTERN
Press ENTER to make the selection. Then press MENU or...

60
English ...
User Controls
SECURITY
ADJUST
EXIT
SECURITY
OFF
SECURITY TIMER
CHANGE PASSWORD
SELECT MOVE
 
SECURITY TIMER
Use this function to set how long (MONTH/DAY/HOUR) the 
projector can be used. Once this time has elapsed you will be  
requested to enter your password again.
 
MONTH EXIT MOVE ADJUST
SECURITY TIMER
DAY
HOUREXIT
The “SECURITY TIMER” will restart to count down when the projector is turned off and then turned back on.
  CHANGE PASSWORD
1.  Press ENTER  to enter SECURITY KEYWORD...

61... English
User Controls
4. Use direction keys, to enter your new password and then 
press  ENTER to confirm your password. 
 Confirm new password 
CONFIRM NEW SECURITY CODE
CHANGE PASSWORD
EXIT
ENTER
5.  Enter the new password again and press ENTER to 
confirm.
 
 If the incorrect password is entered 3 times, the projector will 
automatically shut down. (When turn on the projector.)
 If you have forgotten your password, please contact your local 
office for support. 

62
English ...
User Controls
NETWORK
NETWORK STATUS DISCONNECT
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
APPLY OFF
 
NETWORK STATUS
Display the network connection status. (default: DISCONNECT)
 DHCP
Use this function to select your desired startup screen. If you 
change the setting from one to another, when you exit the OSD 
menu, the new setting will take effect on next open.
 ON: Assign an IP address to the projector from an external 
DHCP server automatically.
 OFF: Assign an IP address manually.
DHCP...

63... English
User Controls
 SUBNET MASK
Select subnet mask number.
SUBNET MASK
ADJUST
SELECT MOVE
EXIT
  GATEWAY
Select the default gateway of the network connected to the 
projector.
GATEWAY
ADJUSTMOVE
SELECT
EXIT
 APPLY
Press ENTER  to apply the selection.