Dukane Projector 6430 User Manual

14
English ...
Introduction
Battery Installation
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not place the battery upside down.
• Replace only with the same or equivalent type recommended by 
the manufacturer.
• Dispose of used batteries according to your local regulations.
1. Press firmly and slide the battery cover off.
2.   Install new batteries (AAA). 
Ensure that you have the...

15... English
Introduction
Using the utility software “Virtual Remote Tool” that you can 
download from our web site (http://www.nec-display.com/ 
dl/en/index.html), Virtual Remote screen (or toolbar) can be 
displayed on your computer screen.
This will help you perform operations such as projector’s 
power on or off and signal selection via a LAN connection.
Toolbar
Virtual Remote screen
This section provides an outline of preparation for use of 
Virtual Remote Tool.
For information on how to use...

16
English ...
Introduction
Step 1: Install Virtual Remote Tool on the computer
•   Supported OS
Virtual Remote Tool will run on the following operating systems.
Windows 8.1 *1, Windows 8.1 Pro *1, Windows 8.1 Enterprise *1, Windows 8 *1,  Windows 8 Pro *1, Windows 8 Enterprise *1, 
Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 Professional, Windows 7 Enterprise, Windows 7 Ultimate
Windows Vista Home Basic, Windows Vista Home Premium, Windows Vista  Business,
Windows Vista Enterprise, Windows...

17... English
Introduction
Read “END USER LICENSE AGREEMENT” carefully.
4  If you agree, click “I accept the terms in the license agreement” \
and then 
click “Next”.
Follow the instructions on the installer screens to complete the 
installation.
After the installation is completed, the shortcut icon for Virtual 
Remote Tool.
TIP:Uninstalling Virtual Remote Tool
•   Preparation
        Exit Virtual Remote Tool before uninstalling. To uninstall Virtual Remote
        Tool, the Windows user account must...

18
English ...
Introduction
Step 3: Start Virtual Remote Tool
Start using the shortcut icon
Start from the Start menu
Click [Start] -> [All Programs] or [Programs] -> [NEC Projector 
User Supportware] -> [Virtual Remote Tool] -> [Virtual Remote 
Tool].
When Virtual Remote Tool starts for the first time, “Easy Setup” 
window will be displayed.
The “Easy Setup” feature is not available on this model. Click 
“Close Easy Setup”. 
Closing the “Easy Setup” window will display the “Projector 
List” window....

19... English
Introduction
Exiting Virtual Remote Tool
1  Click the Virtual Remote Tool icon  on the Taskbar.
The pop-up menu will be displayed.
2 Click “Exit”.
The Virtual Remote Tool will be closed.
Viewing the help file of Virtual Remote Tool
Displaying the help file using the taskbar
1  Click the Virtual Remote Tool icon on the taskbar when Virtual Remote 
Tool is running.
The pop-up menu will be displayed.
2 Click “Help”.
The Help screen will be displayed.
Displaying the help file using the Start...

20
English ...
Introduction
Controlling the Projector over a LAN 
[Using on Windows]
Using the utility software “PC Control Utility Pro 4” that you 
can download from our web site  
(http://www.nec-display.com/dl/en/index.html), the projector 
can be controlled from a computer over a LAN.
Control Functions
Power On/Off, signal selection, picture freeze, picture mute, 
audio mute, adjusting, error message notification, event 
schedule.
Screen of PC Control Utility Pro 4
This section provides an outline of...

21... English
Introduction
Step 1: Install PC Control Utility Pro 4 on the computer
 •  Supported OS - PC Control Utility Pro 4 will run on the following operating systems.
Windows 8.1*1, Windows 8.1 Pro *1, Windows 8.1 Enterprise *1, Windows 8 *1, Windows 8 Pro *1, Windows 8 Enterprise *1,
Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 
Professional, Windows 7 Enterprise, Windows 7 Ultimate
Windows Vista Home Basic, Windows Vista Home Premium, 
Windows Vista Business, Windows Vista Enterprise,...

22
English ...
Introduction
Read “END USER LICENSE AGREEMENT” carefully.
4   If you agree, click “I accept the terms in the license agreement” \
and then 
click “Next”.
Follow the instructions on the installer screens to complete the 
installation.
TIP:Uninstalling PC Control Utility Pro 4
•   To uninstall PC Control Utility Pro 4, do the same procedures stated as in 
“Uninstalling Virtual Remote Tool”. Read “Virtual Remote Tool” as “PC 
Control Utility Pro 4”
Step 2: Connect the projector to a LAN...

23... English
Introduction
5  Click “Open” in the dialog box. If prompted, enter an administrato\
r name 
and password.
The installer will start.
6   Click “Next”.
“END USER LICENSE AGREEMENT” screen will be displayed.
7  Read “END USER LICENSE AGREEMENT” and click “Next”. 
The confirmation window will be displayed.
8  Click “I accept the terms in the license agreement”.
Follow the instructions on the installer screens to complete the install\
ation.
Step 2: Connect the projector to a LAN
Connect the...