Dukane Imagepro 8949h Projector Users Manual

51

OPTION Menu

OPTION Menu (continued)

ItemDescription
SECURITY
(continued)
2.2-4   Move the cursor to the right side of the 
PASSWORD AGAIN BOX and press the 
► button to display the PASSWORD for 
about 20 seconds, please make note of the 
PASSWORD during this time. 
Pressing the 

ENTER button on the remote control 
or 
INPUT  button on the projector will return to 
MyScreen PASS WORD on/off menu.
When a PASSWORD is set for MyScreen:
• The MyScreen registration function (and menu) will be...

52

OPTION Menu

OPTION Menu (continued)

ItemDescription
SECURITY
(continued)
3.1-3    Input a 4 part PIN Code using the ▲/▼/◄/►/
RGB and 
INPUT  buttons. 
The PIN CODE AGAIN BOX will appear. 
Reenter the same PIN Code. This will 
complete the PIN Code registration.
• If there is no key input for about 55 seconds while 
the PIN BOX or the PIN CODE AGAIN BOX is 
displayed, the menu will close. If necessary, repeat 
the process from 3.1-1.
Afterwards, anytime the projector is restarted after 
the power...

53

OPTION Menu

OPTION Menu (continued)

ItemDescription
SECURITY
(continued)
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to 
supply to the projector, it might react as below.
• Transition Detector alarm shown below might appear on screen, if the 
projector has been moved or re-installed.
• Transition Detector alarm might appear on screen, if the MIRROR setting 
has been changed.
• Keystone adjustment feature has been prohibited...

54

OPTION Menu

OPTION Menu (continued)

ItemDescription
SECURITY
(continued) 4.3 Setting the Transition Detector off
4.3-1 
 Follow the procedure in 4.1-1 to display the Transition Detector on/off 
menu.
4.3-2 
 Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the 
Transition Detector on/off menu.
If an incorrect PASSWORD is input, the menu will close. If necessary, repeat 
the process from 4.3-1.
4.4 If you have forgotten your...

55

OPTION Menu

OPTION Menu (continued)

ItemDescription
SECURITY
(continued) 5.2 Displaying the MY TEXT
(1) 
 Use the ▲/▼ buttons on the SECURITY menu 
to select the MY TEXT DISPLAY menu and 
press the ► button to display the MY TEXT 
DISPLAY on/off menu.
(2) 
 Use the ▲/▼ buttons on the MY TEXT DISPLAY 
on/off menu to select on or off.
TURN ON  ó TURN OFF
When it is set TURN ON, the MY TEXT will be 
displayed on the START UP screen and the INPUT-
INFORMATION- when the INFORMATION on the 
SERVICE menu...

56

OPTION Menu

OPTION Menu (continued)

ItemDescription
SECURITY
(continued)
5.3-3   Turning the MY TEXT PASSWORD off
(1)   Follow the procedure in 5.3-1 to display the MY 
TEXT PASSWORD on/off menu.
(2) 
 Select TURN OFF to display the ENTER 
PASSWORD BOX (large). Enter the registered 
PASSWORD and the screen will return to the 
MY TEXT PASSWORD on/off menu. 
If an incorrect PASSWORD is input, the menu will close. If necessary, repeat 
the process from 5.3-3(1)
5.3.4 If you have forgotten your...

57

NETWORK Menu
Remember that incorrect network settings on this projector 
may cause trouble on the network. Be sure to consult with 
your network administrator before connecting to an existing 
access point on your network.
Select “NETWORK” from the main menu to access the 
following functions. 
Select an item using the ▲/▼ cursor buttons on the projector or remote control, 
and press the ► cursor button on the projector or remote control, or 

ENTER 
button on the remote control to execute the item....

58

NETWORK Menu

NETWORK Menu (continued)

ItemDescription
SETUP
(continued)
IP 
ADDRESS
Use the ▲/▼ /◄/► buttons to 
enter the IP ADDRESS. This 
function can only be used when 
DHCP is set to OFF.
• The IP ADDRESS is the number that identifies this 
projector on the network. You cannot have two devices 
with the same IP ADDRESS on the same network.
• The IP ADDRESS “0.0.0.0” is prohibited.
SUBNET  MASK Use the ▲/▼
/◄/► buttons to 
enter the same SUBNET MASK 
used by your PC. This function 
can only be...

59

NETWORK Menu

NETWORK Menu (continued)

ItemDescription
PROJECTOR  NAME (1) 
 Use the▲/▼ buttons on the NETWORK Menu to select the 
PROJECTOR NAME menu and press the  ► button. The 
PROJECTOR NAME dialog will be displayed.
(2) 
 The current PROJECTOR NAME 
will be displayed on the first 3 lines. 
If not yet written, the lines will be 
blank. 
Use the ▲/▼/◄/► buttons and 
the 

ENTER or 
INPUT button to 
select and enter characters. The 
RESET  button can be used to 
erase 1 character at a time. Also...

60

NETWORK Menu

NETWORK Menu (continued)

ItemDescription
MY IMAGE Selecting this item displays the 
MY 
IMAGE menu. 
The application software “PJImage” 
is required to store image(s) into the 
projector.
Use the ▲/▼ buttons to select an item which is a still image by the 
MY IMAGE  (
 MY IMAGE (Still Image Transfer) Display of the 
User’s Manual - Network Guide)  and the ► or 
ENTER button to 
display the image.
• The item without image stored cannot be selected.
• The image names are each displayed...