Dukane Imagepro 8949h Projector Users Manual

31

IMAGE Menu

IMAGE Menu (continued)

ItemDescription
H PHASE
Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker.
Right  ó Left
• This item can be selected only for an RGB signal or a component 
video signal. (except 480i@60, 576i@50, SCART RGB input. )
H SIZE Using the ▲/▼ buttons adjusts the horizontal size.
Large  ó Small
• This item can be selected only for an RGB signal.
• When this adjustment is excessive, the picture may not be 
displayed correctly. In such a case, please...

32

INPUT Menu
INPUT Menu
From the INPUT Menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor 
button on the projector or remote control, or 

ENTER 
button on the remote control to execute the item. Then 
perform it according to the following table.

Item Description
PROGRESSIVE Using the ▲/▼ buttons switches the progress mode.
TV  ó FILM 
ó TURN OFF
  

• This function is performed only for an...

33

INPUT Menu

INPUT Menu (continued)

ItemDescription
COMPONENT Using the ▲/▼ buttons switches the function of the 
COMPONENT
 (Y, CB
/PB, Cr
/Pr) port.
COMPONENT  ó SCART RGB
When the SCART RGB is selected, the 
COMPONENT  (Y, CB
/PB, Cr
/Pr) and VIDEO ports will function as a SCART RGB port. 
A SCART adapter or SCART cable is required for a SCART RGB 
input to the projector. For details, contact your dealer.
VIDEO FORMAT Set the video format for the 
S-VIDEO port and VIDEO port.
(1) Use the ◄/►...

34

INPUT Menu

INPUT Menu (continued)

ItemDescription
FRAME LOCK Set the frame lock function on/off for each port.
(1) Use the ▲/▼ buttons to select one of 
following ports.
QUIT  ó RGB1 
ó RGB2 
ó HDMI
    

(2) Use the ◄/► buttons to turns the frame 
lock function on/off .
TURN ON  ó TURN OFF
• This item can be performed only on a signal   
with a vertical frequency of 50 to 60 Hz.
• When the TURN ON is selected, moving pictures are displayed 
more smoothly.
• This function may cause a certain...

35

INPUT Menu

INPUT Menu (continued)

ItemDescription
RESOLUTION The resolution for the 
RGB1 and RGB2 input signals can be set on 
this projector.
(1) In the INPUT Menu select the RESOLUTION using the ▲/▼ buttons and 
press the ► button.
The RESOLUTION menu will be displayed.
(2)  In the RESOLUTION menu select the 
resolution you wish to display using the ▲/▼ 
buttons. 
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3) Pressing the ► or 

ENTER button when 
selecting a...

36

SETUP Menu
SETUP Menu
From the SETUP Menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button 
on the projector or remote control, or the 

ENTER button 
on the remote control to execute the item. Then perform it 
according to the following table.

Item Description
AUTO 
KEYSTONE 

EXECUTE Selecting this item performs the Automatic keystone distortion 
correction. Projector automatically...

37

SETUP Menu

SETUP Menu (continued)

ItemDescription
KEYSTONE 

Using the ▲/▼ buttons corrects the horizontal keystone distortion. Shrink the right of the image  ó Shrink the left of the image
• The adjustable range of this function will vary among inputs. For 
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus), 
this function may be excessive. This function should be used when 
the zoom adjustment is set to the full WIDE (wide-angle focus)...

38

AUDIO Menu
AUDIO Menu
From the AUDIO Menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button 
on the projector or remote control, or 

ENTER button on 
the remote control to execute the item. Then perform it 
according to the following table.

Item Description
VOLUME Using the ▲/▼ buttons adjusts the volume.
High  ó Low
TREBLE Using the ▲/▼ buttons adjusts the treble level.
High  ó Low
BASS...

39

SCREEN Menu
SCREEN Menu
From the SCREEN Menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button 
on the projector or remote control, or 

ENTER button on 
the remote control to execute the item. Then perform it 
according to the following table.

Item Description
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.

�
TÜRKÇE �
POLSKI �
SUOMI �
ENGLISH � FRANÇAIS �...

40

SCREEN Menu

SCREEN Menu (continued)

ItemDescription
START UP Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected.
MyScreen  ó ORIGINAL 
ó TURN OFF
    

Feature
MyScreen Screen can be registered by the MyScreen item 
(
41).
ORIGINAL Screen preset as the standard screen.
TURN OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the...