Dukane Imagepro 8949h Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 8949h Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
11 Setting up Connecting your devices (continued) • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Be sure to consult to the administrator of the network. Do not connect LAN port to any network that might have the excessive voltage. - Some signal may need an adapter to input this...
Page 12
12 Setting up Connecting power supply 1.Connect the connector of the power cord to the AC IN (AC inlet) of the projector. 2.Firmly plug the power cord's plug into the outlet. ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to get a new one. • Only plug the power cord into an outlet whose voltage is matched to the...
Page 13
13 Remote control Remote control Laser pointer This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER INDICATOR lights while the LASER button is pressed. ►The laser pointer of the remote control is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems. WARNING ►Use of controls or adjustments or performance of procedures other than those...
Page 14
14 Remote control Approx.3 m 30º 30º 30º 30º Approx. 3 m 20º 20º Approx. 3 m About the remote control signal The remote control works with the projector’s remote sensors. This projector has three remote sensors on the front, on the top, and on the back. The sensors can be respectively turned active or inactive using the “REMOTE RECEIV.” in the SERVICE item of OPTION Menu ( 48). Each sensor senses the signal within the following range when the sensor is active. The front and top sensors: 60...
Page 15
15 Remote control Using as a wired remote control The accessory remote control works as a wired remote control, when the wired control port at the bottom of the remote control connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.5 diameter stereo mini plugs. When the remote control signal is hard to reach surely to the projector in the environment, this function is effective. • To connect the remote control with the projector, use an audio cable with 3.5...
Page 16
16 Contents Power on/off BLANKLASER ASPECT PUSH ENTER PAGE UP LASER INDICATORMY SOURCE/ DOC.CAMERASEARCH STANDBY/ON VIDEORGB PAGE DOWNESCMENU RESET POSITION AUTOPbyPMAGNIFYON OFFMY BUTTON1 2VOLUME+ -FREEZE KEYSTONE MUTE 1.Make sure that the power cord is firmly and correctly connected to the projector and the outlet. Turning on the power 2.Remove the lens cover, and set the power switch to the ON position (marked “ I ”). The POWER indicator will light up in steady orange ( 69). Then wait...
Page 17
17 Operating BLANKLASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEORGB PAGE DOWN ESCMENU RESET POSITION AUTOPbyP MAGNIFYON OFFMY BUTTON1 2VOLUME+ - FREEZE KEYSTONE MUTE BLANK LASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEORGB PAGE DOWN ESCMENU RESET POSITION AUTOPbyP MAGNIFYON OFFMY BUTTON1 2VOLUME+ - FREEZE KEYSTONE MUTE Temporarily muting the sound BLANK LASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR...
Page 18
18 Operating BLANKLASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEORGB PAGE DOWN ESCMENU RESET POSITION AUTOPbyP MAGNIFYON OFFMY BUTTON1 2VOLUME+ - FREEZE KEYSTONE MUTE BLANK LASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEORGB PAGE DOWN ESCMENU RESET POSITION AUTOPbyP MAGNIFYON OFFMY BUTTON1 2VOLUME+ - FREEZE KEYSTONE MUTE 1.Press the VIDEO button on the remote control to select an input for video signal....
Page 19
19 Operating BLANKLASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEORGB PAGE DOWN ESCMENU RESET POSITION AUTOPbyP MAGNIFYON OFFMY BUTTON1 2VOLUME+ - FREEZE KEYSTONE MUTE • When the vertical lens shift is adjusted, it is recommended to shift the picture upward. NOTE 1.Use the zoom ring to adjust the screen size. Adjusting the zoom and focus 2.Use the focus ring to focus the picture. 1/2 1/10 1/10 Zoom ring Focus ring Top 1.Use the vertical lens shift...
Page 20
20 Operating BLANKLASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEORGB PAGE DOWN ESCMENU RESET POSITION AUTOPbyP MAGNIFYON OFFMY BUTTON1 2VOLUME+ - FREEZE KEYSTONE MUTE BLANK LASER ASPECT PUSH ENTER PAGE UP LASER INDICATOR MY SOURCE/ DOC.CAMERA SEARCH STANDBY/ON VIDEORGB PAGE DOWN ESCMENU RESET POSITION AUTOPbyP MAGNIFYON OFFMY BUTTON1 2VOLUME+ - FREEZE KEYSTONE MUTE 1.Press the POSITION button on the remote control when no menu is indicated. The...