Home
>
Digital Projection
>
Projector
>
Digital Projection Titan Wuxga 3d , Dual 3d, Titan Wuxga 330, 660 User Manual
Digital Projection Titan Wuxga 3d , Dual 3d, Titan Wuxga 330, 660 User Manual
Have a look at the manual Digital Projection Titan Wuxga 3d , Dual 3d, Titan Wuxga 330, 660 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 110
Page 4.56 Rev A April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Dark time
Ghosting can be caused by the left and right images overlapping during t\
he time
that the Z screen or 3D glasses are switching.
Press
and to select Dark Time.
Press and to adjust the slider (0 to 6000 µS).
Frame Dominance
The outgoing 3D frames are...](http://img.usermanuals.tech/thumb/5761/87961/w64_digital-projection-titan-wuxga-dual-3d-ultra-contrast-manual_d-109.png "Page 110
Page 4.56 Rev A April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Dark time
Ghosting can be caused by the left and right images overlapping during t\
he time
that the Z screen or 3D glasses are switching.
Press
and to select Dark Time.
Press and to adjust the slider (0 to 6000 µS).
Frame Dominance
The outgoing 3D frames are...")
![Page 112
Page 4.58 Rev A April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Output Shuttering (Frame rate Multiplication)
If the 3D video is available only at low frame rates, it will be necessa\
ry to multiply
the frame rate to obtain a flicker-free image. For example, a 60Hz frame rate can be
doubled to 120Hz, or a 48Hz frame rate could be...](http://img.usermanuals.tech/thumb/5761/87961/w64_digital-projection-titan-wuxga-dual-3d-ultra-contrast-manual_d-111.png "Page 112
Page 4.58 Rev A April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Output Shuttering (Frame rate Multiplication)
If the 3D video is available only at low frame rates, it will be necessa\
ry to multiply
the frame rate to obtain a flicker-free image. For example, a 60Hz frame rate can be
doubled to 120Hz, or a 48Hz frame rate could be...")
Rev A April 2011 Page 4.57 Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Notes 3D may not be present on some models None of the 3D options are avialable unless 3D Mode is set to Consumer or Professional. In order to achieve maximum light output and a smooth greyscale, whilst eliminating ghosting, the following procedure is recommended: Set the Dark Time (see previous page) to a value appropriate to the glasses or Z-screen, say 1000 µS. Adjust the Sync Delay time to eliminate ghosting and achieve a smooth greyscale. Repeat steps 1 and 2 until the best result is obtained. Use this if the left and right images appear to be swapped. 1. 2. 3. 3D Sync Delay The sync signal from the 3D server will be in phase with the frames gene\ rated by its graphics card. However, to compensate for processing delays in the projector, this control is provided to introduce a delay to the sync output signal \ sent to the Z screen or 3D glasses. Press and to select Sync Delay. Press and to adjust the slider (-1500 to +1500 µS). 3D Sync Source Press and to select 3D Sync Source. Press and to select from: External Internal 3D Sync Output Polarity Press and to select 3D Sync Output Polarity. Press and to select from: Positive Negative • • • Setup menu, 3D Setup continued Incoming video Incoming sync signal Video signal with processing delays (and dark time adjustment) Sync output signal after delay adjustment
Page 4.58 Rev A April 2011 4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Output Shuttering (Frame rate Multiplication) If the 3D video is available only at low frame rates, it will be necessa\ ry to multiply the frame rate to obtain a flicker-free image. For example, a 60Hz frame rate can be doubled to 120Hz, or a 48Hz frame rate could be tripled to 144Hz. Press and to select Output Shuttering. Press and to select from: x1 x2 x3 x2 Example • Setup menu, 3D Setup continued Notes 3D may not be present on some models None of the 3D options are avialable unless 3D Mode is set to Consumer or Professional. WUXGA models only: The maximum Frame Rate Multiplication available for WUXGA and UXGA images is x2. L1 R1 L2 R2 L1 L1 R1R2 L2 L3 R2 R1 L3 L2 INOUt
Rev A April 2011 Page 4.59 Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Lens Setup Press and to select Lens. Press to open the Lens submenu. Centre Lens Press and to select Centre Lens. Press to centre the lens. Calibrate Focus Press and to select Calibrate Focus. Press . The focus mechanism will operate for about a minute, whilst the minimum and maximum travel distances are determined. Calibrate Zoom Press and to select Calibrate Zoom. Press . The zoom mechanism will operate for about a minute, whilst the minimum and maximum travel distances are determined. • • • • Setup menu, continued Notes Each time a new lens is fitted to the projector, the calibration procedure must be carried out. Note that two shortcuts are available using the remote control: Calibrate Focus: Calibrate Zoom:
Page 4.60 Rev A April 2011 4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Notes Restore Defaults will restore all settings to factory defaults. All ISF settings will be lost (see next page). If you are not sure this is what you want to do, then either: make a record of all settings first or select No, then press . Following a restore to factory defaults, the projector will perform a self-test and enter Standby mode. This process will take up to 10 seconds. During this time the projector will not respond to any commands. When complete, all settings will be restored to factory condition and all user settings will be removed except for downloaded colour and gamma parameters. Restore Defaults Press and to select Restore Defaults. Press . The following message will be displayed. Press and to select from: Yes Press to confirm your that you really wish to restore all default settings. All settings will be restored to factory defaults. or No Press or to exit without making the change. • • Setup menu, continued
Rev A April 2011 Page 4.61 Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Notes When using the menus, press OSD or to hide or reveal the On-Screen-Display. Information Menu If Distributed By is visible, then the installer is ISF Certified, and the Save and Delete Preset options will not be available. Contact the installer for more information. Information Menu Projector Information Lightning projectors have only one lamp. Titan projectors may have one or two lamps. Information Menu Source Information Information menu To return to the main menu, press up to three times. From the main menu: Press and until Information is highlighted. Press to open the Information menu. The blue highlight moves to the first item in the menu. Projector Information Press and to select Projector Information. Press to open the Projector Information submenu. Source Information Press and to select Source Information. Press to open the Source Information submenu. • • • Input Picture Geometry Colour Setup Information Input: DVI Standard: 720p 60 Frequency V: 60Hz H: 45.0KHz SOURCE INFORMATION
Page 4.62 Rev A April 2011 4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Digital Projection Information Press and to select Digital Projection. Press to see the DP Information screen. • Information menu continuedNotes When using the menus, press OSD or to hide or reveal the On-Screen-Display. Information Menu DP Contact Information
Rev A April 2011 Page 5.1 5. Userware continued Contents Introduction ........................................................................\ ..................................................................5.4 Applet version........................................................................\ ...........................................................5.4 Disconnect ........................................................................\ ............................................................5.4 Reconnect........................................................................\ .............................................................5.4 Standalone version ........................................................................\ ...................................................5.5 Disconnect ........................................................................\ ............................................................5.5 Reconnect........................................................................\ .............................................................5.5 Show page ........................................................................\ ....................................................................5.6 On / Off ........................................................................\ ....................................................................5.6 Shutter Open / Closed ........................................................................\ ...............................................5.6 Freeze / Un-Freeze ........................................................................\ ...................................................5.6 Picture sliders ........................................................................\ ...........................................................5.6 Input Presets ........................................................................\ ............................................................5.7 Recall ........................................................................\ ..................................................................5.7 Save ........................................................................\ ....................................................................5.7 Orientation ........................................................................\ ...............................................................5.8 Input ........................................................................\ ........................................................................5.8 Test Pattern ........................................................................\ ..............................................................5.8 Aspect Ratio ........................................................................\ .............................................................5.8 Lens page ........................................................................\ .....................................................................5.9 Lens controls ........................................................................\ ............................................................5.9 Shutter Open / Closed ........................................................................\ ...............................................5.9 Calibrate Focus ........................................................................\ ........................................................5.9 Calibrate Zoom ........................................................................\ .........................................................5.9 Edge Blend page ........................................................................\ .......................................................5.10 Markers On / Off ........................................................................\ .....................................................5.10 Active Edges ........................................................................\ ..........................................................5.10 Input 8 DVI 3D Resolution ........................................................................\ .......................................5.10 Overlap Width........................................................................\ .........................................................5.10 Black Level Uplift page ........................................................................\ .............................................5.11 x2, x4 Region Uplift ........................................................................\ ..................................................5.11 Non-Addressable Border ........................................................................\ ..........................................5.11 Back to Edge Blend........................................................................\ ..................................................5.11
Page 5.2 Rev A April 2011 5. Userware Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Image page ........................................................................\ .................................................................5.12 Colour Space ........................................................................\ .........................................................5.12 Component ........................................................................\ ............................................................5.12 Phase slider ........................................................................\ ...........................................................5.12 Gamma ........................................................................\ ..................................................................5.12 Parametric slider ........................................................................\ .....................................................5.12 Convergence controls ........................................................................\ .............................................5.13 Horizontal Convergence ........................................................................\ ..........................................5.13 Vertical Convergence ........................................................................\ ..............................................5.13 Close ........................................................................\ .....................................................................5.13 Screen page ........................................................................\ ...............................................................5.14 Blanking On / Off ........................................................................\ ....................................................5.14 Blanking adjust ........................................................................\ .......................................................5.14 Keystone adjust ........................................................................\ ......................................................5.14 Position adjust ........................................................................\ ........................................................5.14 MCGD page ........................................................................\ ................................................................5.15 The MCGD measurement procedure ........................................................................\ ........................5.15 MCGD edit boxes ........................................................................\ ...................................................5.16 Write to Projector ........................................................................\ ....................................................5.16 Read from Projector ........................................................................\ ................................................5.16 Save File ........................................................................\ ................................................................5.16 Open File ........................................................................\ ...............................................................5.16 TCGD page ........................................................................\ .................................................................5.17 TCGD values ........................................................................\ ..........................................................5.17 Update Graph ........................................................................\ .........................................................5.18 Save File ........................................................................\ ................................................................5.18 Open File ........................................................................\ ...............................................................5.18 Write User 1, User 2 ........................................................................\ ................................................5.18 Read User 1, User 2 ........................................................................\ ...............................................5.18 3D page ........................................................................\ .......................................................................5.19 3D Enable ........................................................................\ ..............................................................5.19 3D Input ........................................................................\ .................................................................5.19 Dark Time ........................................................................\ ..............................................................5.19 Sync Delay ........................................................................\ .............................................................5.19 Frame Dominance ........................................................................\ ..................................................5.19 3D Sync Output Polarity ........................................................................\ ..........................................5.19 Frame Rate Multiplier ........................................................................\ ..............................................5.20 continued
Rev A April 2011 Page 5.3 Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 5. Userware For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . 3D Format ........................................................................\ ..............................................................5.20 Create 3D Preset ........................................................................\ ....................................................5.20 Recall 3D Preset ........................................................................\ .....................................................5.20 Global Colour page ........................................................................\ ..................................................5.21 Global Colour Mode ........................................................................\ ................................................5.21 Modal Colour page ........................................................................\ ...................................................5.22 Modal Colour Mode ........................................................................\ .................................................5.22 Lift and Gain sliders ........................................................................\ ................................................5.23 Temperature slider ........................................................................\ ..................................................5.23 Information page ........................................................................\ .......................................................5.24 Projector Information ........................................................................\ ...............................................5.24 Digital Projection ........................................................................\ .....................................................5.24 FastFrame page ........................................................................\ ........................................................5.25 FastFrame Enable ........................................................................\ ..................................................5.25 Dark Time ........................................................................\ ..............................................................5.25 System page ........................................................................\ ..............................................................5.26 OSD ........................................................................\ ......................................................................5.26 Backlight ........................................................................\ ................................................................5.26 DMD controls ........................................................................\ .........................................................5.26 Lamp mode ........................................................................\ ............................................................5.26 Lamp Power slider ........................................................................\ ..................................................5.26 Connect page ........................................................................\ .............................................................5.27 Refresh ........................................................................\ ..................................................................5.27 Connect ........................................................................\ .................................................................5.27 Disconnect ........................................................................\ .............................................................5.27
Page 5.4 Rev A April 2011 5. Userware Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Notes To use the Titan Userware the java Runtime Environment software must be installed on your browser. This software can be downloaded, free of charge from www.java.com. The LAN IP Address of the projector can be found in the Network submenu of the Setup menu, as described in section 4. Controlling the projector. Whenever the projector is connected to mains power, whether in Running mode or Standby mode, the Applet version of the Userware will be available. The Applet version of the Userware can be used only to control the projector from which it was downloaded. The Userware can be used to control only one projector at a time, and only one instance can be running at one time. More than one computer can be used to control more than one projector on the same network. Introduction The Titan Userware provides an intuitive interface to enable control of many of the features of the projector from a personal computer, via a LAN connection. There are two versions of the Userware: the Applet version, stored on the projector and the Standalone version, supplied on disk or from the Digital Projection website. Applet version To activate the Userware, simply point the browser at the projector by typing its LAN IP Address into the address bar, then press the Enter key. The Applet version does not require installation on the personal computer, as it is in the form of a Java applet, downloaded automatically from the proje\ ctor by the browser. The first time the applet is downloaded, you may see the following message: Tick the box and click OK. In future, the Userware will load immediately. The Userware interface is organised into a number of pages, as listed below: Show Lens Blend Image Screen MCGD TCGD 3D Global Modal info FastFrame System Each page is described in full later in this section. When the Userware is started, the Show page will display immediately. The Page buttons are always visible at the bottom of the display: Disconnect Navigate away from the projector to disconnect. reconnect To reconnect re-type the IP Address in the browser address box then press Return. • • • • New Java applet download: Tick the box only if you trust the source. o I trust this applet. OK