Digital Projection Titan Sx+-500 User Manual
Have a look at the manual Digital Projection Titan Sx+-500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Rev B 02/2007 page 7.5 Digital Projection TITAN sx+-500 User Manual 7. Appendix Electrical InputsRGB1, RGB2, DVI, SDI, Composite Video, S-Video, Component Pixel clockup to 165MHz Control inputs1 x LAN 1 x wifi LAN 1 x RS232 serial: 19200 baud, 8 bits, 1 stop bit, no parity 1 x remote control Mains voltage100-230 VAC ±10%, 48-62Hz (single phase) Power consumption750 W International RegulationsMeets FCC Class B requirements Meets EMC Directives (EN 50081-1, EN 50082-1, EN 55022) MeetsLow Voltage Directive (EN60950) IndicatorsPower, Shutter, Error, IR, Lamp 1, Lamp 2 Physical Operating Temperature0 to 40°C Storage Temperature-10 to 50°C Thermal Dissipation2600 BTU/hr Operating Humidity20% to 80% non-condensing Weightapproximately 27 kg (50 lbs) FCC WIFI ID R68WIPORT
Rev B 02/2007 page 7.6 7. Appendix Digital Projection TITAN sx+-500 User Manual Lens Data 105-607 105-608 105-609 105-610 throw ratio0.73 : 1 fixed 1.2 : 1 fixed 1.2 : 1 fixed 1.5 - 2.02 : 1 zoom full DMD image width1.5m - 4.4m 2.5 - 12.4m 1 - 1.7m 2 - 16m (4.9 - 13.4ft) (8.1 - 40.6ft) (3.3 - 5.4ft) (6.6 - 52.5ft) throw distance1.1m - 3.2m 3 - 15m 1.2 - 2m 4 - 24m (3.6 - 10.5ft) (9.8 - 49ft) (3.9 - 6.6ft) (13 - 79ft) lens shift vertical*± 120 ± 525 ± 525 ± 525 (vs DMD height)± 0.11H ± 0.5H ± 0.5H ± 0.5H lens shift horizontal*± 95 ± 450 ± 450 ± 450 (vs DMD width)± 0.068W ± 0.32W ± 0.32W ± 0.32W ApertureF/2.5 F/2.5 F/2.5 F/2.5 Max object field size26.1mm 34.6mm to be confirmed34.6mm (1.03”) (1.36”) (1.36”) Effective focal length14.6mm 23.55mm to be confirmed28.94 - 38.95mm (0.58”) (0.93”) (1.14 - 1.53”) Distortion88% Mechanical Lens extension**204mm 268mm 268mm 194mm (8.0in) (10.6in) (10.6in) (7.6in) Length361mm 422.1mm 422.1mm 345mm (14.2in) (16.6in) (16.6in) (13.6in) Maximum diameter163mm 169mm 169mm 139mm (6.42in) (6.65in) (6.65in) (5.47in) Weight to be confirmed *Actual available lens shift is subject to limitations of the lens mount and is reduced when the lens is to be shifted in two directions combined (see Shifting the image, in Section 2. Installation). **Lens extension is the distance from the outer end of the lens to the front of the projector. It is measured when the lens is focussed at infinity and fully extended. At other focus settings, the extension could be up to 10mm less. It is important for calculating throw distance accurately (see Useful lens calculations, in Section 2. Installation). lens extension, measured from front of corner post
Rev B 02/2007 page 7.7 Digital Projection TITAN sx+-500 User Manual 7. Appendix 105-611 105-612 105-613 throw ratio2.02 - 2.77 : 1 zoom 2.77 - 4.51 : 1 zoom 4.51 - 7.53 : 1 zoom full DMD image width1.4 - 11.9m 2 - 16.3m 1.7 - 17.7m (4.7 - 39ft) (6.6 - 53.3ft) (5.6 - 58.2ft) throw distance4 - 24m 9.1m - 45m 12 - 80m (13 - 79ft) (30 - 148ft) (39 - 263ft) lens shift vertical*± 525 ± 525 ± 525 (vs DMD height)± 0.5H ± 0.5H ± 0.5H lens shift horizontal*± 450 ± 450 ± 450 (vs DMD width)± 0.32W ± 0.32W ± 0.32W ApertureF/2.5 F/2.5 F/2.5 Max object field size34.6mm 34.6mm 34.6mm (1.36”) (1.36”) (1.36”) Effective focal length39.0 - 53.43mm 52.4 - 85.3mm 84.86 - 142.03mm (1.54 - 2.1”) (2.06 - 3.36”) (3.34 - 5.59”) Distortion88% Mechanical Lens extension**159mm 152mm 118mm (6.2in) (6.0in) (4.7in) Length311mm 304mm 271mm (12.24in) (11.97in) (10.67in) Maximum diameter139mm 139mm 139mm (5.47in) (5.47in) (5.47in) Weight to be confirmed
Rev B 02/2007 page 7.8 7. Appendix Digital Projection TITAN sx+-500 User Manual Dimensions All dimensions in mm unless otherwise stated
Rev B 02/2007 page 7.9 Digital Projection TITAN sx+-500 User Manual 7. Appendix Input modes suppor ted Signal Resolution Refresh Total Horizontal Rate number of Frequency ( Hz ) lines (KHz) SDTV 480i 720 x 480 60 525 15.73999 9 576i 720 x 576 50 625 15.63999 9 HDTV 480p 720 x 480 60 525 31.5199 576p 720 x 576 50 625 31.2599 720p50 1280 x 720 50 750 37.51999 720p60 1280 x 720 60 750 45.00999 1080psf24 1920 x 1080 48 1125 27.0099 1080p24 1920 x 1080 24 1125 27.0099 1080i50 1920 x 1080 50 1125 28.1399 1080p25 1920 x 1080 25 1125 28.1399 1080i60 1920 x 1080 60 1125 33.7599 1080p30 1920 x 1080 30 1125 33.7599 1080p50 1920 x 1080 50 1125 56.249 1080p60 1920 x 1080 60 1125 67.489 COMPUTER 480p 640 x 480 60 525 31.5199 VGA72 640 x 480 72 520 37.8699 VGA75 640 x 480 75 500 37.5199 VGA85 640 x 480 85 509 43.2799 SVGA56 800 x 600 56 625 35.1699 SVGA60 800 x 600 60 628 37.8999 SVGA72 800 x 600 72 666 48.0899 SVGA75 800 x 600 75 625 46.8899 SVGA85 800 x 600 85 631 53.6899 XGA60 1024 x 768 60 806 48.3899 XGA70 1024 x 768 70 806 56.5099 XGA75 1024 x 768 75 800 60.0299 XGA85 1024 x 768 85 808 68.6899 XGA+75 1152 x 864 75 900 67.5299 SXGA-60 1280 x 960 60 1000 60.0299 SXGA-85 1280 x 960 85 1011 85.9899 SXGA60 1280 x 1024 60 1066 64.0299 SXGA75 1280 x 1024 75 1072 80.3299 SXGA85 1280 x 1024 85 1072 91.1699 SXGA+60 1400 x 1050 60 1089 65.3299 SXGA+75 1400 x 1050 75 1099 82.3099 SXGA+85 1400 x 1050 85 1105 93.9099 UXGA60 1600 x 1200 60 1250 75.0299 COMPOSITE S-VIDEO COMPONENT RGB1 RGB2 DVI SDI
Rev B 02/2007 page 7.10 7. Appendix Digital Projection TITAN sx+-500 User Manual NotesInput connections 1. RGB1 input 5 x 75 ohm BNC Used for computer, progressive video and analog HD video. RGsB RGBS RGBHV YCrCb R R R Pr/Cr G + Sync G G Y B B B Pb/Cb Sync H Sync V Sync 2. RGB2 input 15 way D-type connector All RGsB RGBS RGBHV YCrCb 1 R R R Pr/Cr 2 G + Sync G G Y 3 B B B Pb/Cb 4 ID2 5 Digital Ground 6 R Ground 7 B Ground 8 G Ground 9 N/C 10 Digital Ground 11 ID0 12 ID1 13 Sync H Sync 14 V Sync 15 ID3pin view of female connector
Rev B 02/2007 page 7.11 Digital Projection TITAN sx+-500 User Manual 7. Appendix 3. DVI-D input 24 way D-type connector 1 TMDS Data 2- 2 TMDS Data 2+ 3 TMDS Data 2 Shield 4 unused 5 unused 6 DDC Clock 7 DDC Data 8 unused 9 TMDS Data 1- 10 TMDS Data 1+ 11 TMDS Data 1 Shield 12 unused 13 unused 14 +5 V Power 15 Ground 16 Hot Plug Detect* 17 TMDS Data 0- 18 TMDS Data 0+ 19 TMDS Data 0+ 20 TMDS Data 0 Shield 21 unused 22 unused 23 TMDS Clock Shield 24 TMDS Clock+ * Hot plug detect (HPD) is fully DVI compliant. DVI sources detect the presence of a display device by providing +5V on pin 14 and looking for +5V on pin 16. Whenever the projector is operational, and 5V is present on pin 14, pin 16 will be held at +5V. EDID is available even when the projector is switched off. Operational means that the projector is powered up. Non operational states are powered down and some self test and reprogramming modes. Notes pin view of female connector
Rev B 02/2007 page 7.12 7. Appendix Digital Projection TITAN sx+-500 User Manual 4. SDI input 1 x 75 ohm BNC SMPTE 292 / HD-SDI signals are very high speed digital signals which require better quality coaxial cable than conventional analogue video. The data rate is 1.5 Gigabits per second. In choosing cable length and connectors for any installation the frequency response loss in decibels should be proportional to 1√f, from 1MHz, to 1.5GHz. The following or similar cable specification should be used to ensure fault free communication between source and projector. Belden 8281 cable or equivalent 5. Composite video input 1 x 75 ohm BNC PAL or NTSC video 6. S-Video input 4 pin mini-DIN 1 L Ground 2 C Ground 3 Lumunance (Y) 4 Chrominance (C) 7. Component video input 4 x 75 ohm BNC Used for standard definition interlaced signals only RGsB RGBS YCrCb RRCr G + Sync G Y + Sync BBCb Sync Notes pin view of female connector
Rev B 02/2007 page 7.13 Digital Projection TITAN sx+-500 User Manual 7. Appendix Control connections LAN connections TCP Port number 10001 Wireless 802.11b/g 10BaseT Unshielded Twisted Pair cable The standard wire colours as as follows: 1 White / Orange stripe 2 Orange 3 White / Green stripe 4 Blue 5 White / Blue stripe 6 Green 7 White / Brown stripe 8 Brown Crossed cable (used to connect directly to a computer with no hub or network.) (Note that only the green and orange pairs are crossed) 1 White / Orange stripe White / Green stripe 1 2 Orange Green 2 3 White / Green stripe White / Orange stripe 3 4 Blue Blue 4 5 White / Blue stripe White / Blue stripe 5 6 Green Orange 6 7 White / Brown stripe White / Brown stripe 7 8 Brown Brown 8 Notes Only one remote connection (RS232, LAN or Wireless LAN) should be used at any one time. Use: • a straight cable to connect to a hub or network, or • a crossed cable as shown here to connect ONLY to a computer directly. top view of cable connector (clip is underneath)
Rev B 02/2007 page 7.14 7. Appendix Digital Projection TITAN sx+-500 User Manual Serial control input 1 unused 2 Received Data (RX) 3 Transmitted Data (TX) 4 unused 5 Signal Ground 6 unused 7 unused 8 unused 9 unused Null-modem cable (used to connect the projector to a computer) RX 2 --- 3 TX TX 3 --- 2 RX GND 5 --- 5 GND Serial port settings •Baud rate 19,200 bps •Data length 8 bits •Stop bits one •Parity none •Flow control none Notes The projector is a DTE, so use: •a straight cable to connect to a modem, or •a null-modem cable as shown here to connect to another DTE such as a computer. Only one remote connection (RS232, LAN or Wireless LAN) should be used at any one time. pin view of female connector