Digital Projection Titan Reference 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual

Rev C  April 2011 Page 4.29
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 None of the Geometry controls 
are available for Input 8.
 
Geometry Menu 
  Resolution
 Input Detection  should 
normally be set to Automatic. 
However, if the incoming video 
signal is non-standard, the 
projector may not be able to 
select an...

Page 4.30 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
When Input Detection is set to Custom:
Press  and   to select one of the adjustment sliders.
 Press  and   to adjust the slider to match the resolution of the incoming 
video signal.
Blanking
Blanking curtains can be applied to each edge of the picture.
Press...

Rev C  April 2011 Page 4.31
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Colour Menu
 Some menu items may be 
greyed out - unavailable due to 
the effect of settings made in 
other menus, or due to the type 
of input signal.
 Read these notes on...

Page 4.32 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Read the notes on Colour and 
Global Colourimetry earlier 
in this section before making 
any settings in the Colour 
menus.
  Note that any changes made 
in the Global Colourimetry 
menu (see Setup Menu, later 
in this section) will affect ALL 
inputs,...

Rev C  April 2011 Page 4.33
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 The Trim submenu is available  
only if Global Colour Mode  is 
selected.
 
Colour Menu  
 Trim
 Read the notes on Colour and 
Global Colourimetry earlier 
in this section before making 
any settings in the Colour 
menus.
Trim
Press  and   to select...

Page 4.34 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Setup Menu
Setup menu
 To return to the main menu, press  up to three times.
 From the main menu:
Press 
 and   until Setup is highlighted.
Press  to open the Setup menu. The...

Rev C  April 2011 Page 4.35
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Projector Setup
Press  and   to select Projector.
 Press  to open the Projector submenu.
Orientation
Press  and   to select Orientation.
 Press  and   to select from:
Desktop Front
Desktop Rear
Ceiling Front
Ceiling Rear
Control panel Backlight
Press  and   to...

Page 4.36 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Keystone adjustment can be 
found in both the Geometry and 
Projector Setup menus.
 The Keystone adjustment is 
NOT available for Input 8.
  The range of adjustment will 
be dependent on the input 
resolution.
 Some computer graphics cards 
do not...

Rev C  April 2011 Page 4.37
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Test Patterns
Press  and   to select Test Patterns.
 Press  to open the Test Patterns submenu.
 Press  and   to select from:
Off
Alignment Grid
Screen Layout
    (shows outlines of various aspect ratios)
Chequerboard
Colour Bars
0% Field
      (black)
ColorMAX...

Page 4.38 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Setup menu, projector Setup continued
FastFrame
Used to reduce the artifacts and image blur typically associated with ra\
pidly moving 
images, by increasing the time the display is blanked between frames (d\
ark time).
From the Projector Setup menu, press 
 and...