Digital Projection Titan Reference 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual

Rev C  April 2011 Page 4.39
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 
Setup Menu 
 Projector Setup 
    Edge Blend
 
Setup Menu  
 Projector Setup 
    Edge Blend 
      Active Edges
Edge Blend
Used to improve the appearance of multi-projector displays, by blending \
overlapping 
edges to present a seamless image....

Page 4.40 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 The actual blend will be 
smoother than that shown here.
 Edges that have not been 
selected as Active, will be 
greyed out.
 To see the effect of the 
adjustment, turn the Overlap 
Markers ON..
 Input 8 is pixel-mapped directly 
to the DMDs, so the image...

Rev C  April 2011 Page 4.41
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Black Level Uplift
As it is not possible for any projector to produce an absolute black, an\
y ‘black’ areas 
in the overlapped edges may appear slightly less dark than those in the \
rest of the 
image.
Black Level Uplift can be used to counteract this effect,...

Page 4.42 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 To adjust Manually:
  Working on one projector at a 
time, display a test pattern of 
0% Field (black), set all four 
border adjustments to zero, 
then increase the size of each, 
until the border disappears.
Non-Addressable Border
Around the edge of the...

Rev C  April 2011 Page 4.43
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 
Setup Menu 
 Global Colourimetry
 Some menu items may be 
greyed out - unavailable due to 
the effect of settings made in 
other menus, or due to the type 
of input signal.
 Read these notes on Colour 
and Global Colourimetry 
before making any settings...

Page 4.44 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Read the notes on Colour and 
Global Colourimetry earlier 
in this section before making 
any settings in the Colour 
menus.
  Note that any changes made in 
the Global Colourimetry menu  
will affect ALL inputs, modes 
and presets for which  Global 
Mode...

Rev C  April 2011 Page 4.45
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Lamp Setup
Press  and   to select Lamp.
 Press  to open the Lamp submenu.
The middle row shows the current lamp setting.
Change Lamp Setting
Press  and   to select Change Lamp Setting.
Press  to open the Lamp Setting control box.
single lamp models
dual lamp...

Page 4.46 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Lamp power
Press  and   to select the Lamp Power setting.
 Press  and   to adjust the Lamp Power from:
  80 to 100%  in 1% steps
Lamp Mode
Press  and   to select Lamp Mode.
 Press  and   to select from:
single lamp modes
Lamp 1
  lamp 1 only
Lamp 2 lamp 2 only...

Rev C  April 2011 Page 4.47
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 
Setup Menu 
 On Screen Display
 The On Screen Display will 
move to the centre of the DMD 
when Blanking is turned On.
  (see Geometry menu, earlier in 
this section).
  If a menu is opened, and no 
other key is pressed within the 
period set in the  OSD...

Page 4.48 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Password
Entry to the password protected area is available to authorised service \
personel 
only.
Press 
 and   to select Password.
 Press  to open the Password control box.
Press  and   to select each digit in turn.
 Press  and   to adjust the digit from:
0 to...