Digital Projection Titan Reference 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual

Rev C  April 2011 Page 4.59
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Lens Setup
Press  and   to select Lens.
 Press  to open the Lens submenu.
Centre Lens
Press  and   to select Centre Lens.
 Press  to centre the lens.
Calibrate Focus
Press  and   to select Calibrate Focus.
 Press .
The focus mechanism will operate for about a...

Page 4.60 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Restore Defaults will restore 
all settings to factory 
defaults. All ISF settings will 
be lost (see next page).
  If you are not sure this is 
what you want to do, then 
either:
 make a record of all settings 
first 
 
or 
select No, then press 
....

Rev C  April 2011 Page 4.61
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Information Menu
 If Distributed By is visible, then 
the installer is  ISF Certified, 
and the Save and Delete 
Preset  options will not be 
available. Contact the...

Page 4.62 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Digital Projection Information
Press  and   to select Digital Projection.
 Press  to see the DP Information screen.
•
Information menu continuedNotes
  When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Information Menu  
 DP...

Rev C  April 2011 Page 5.1
5. Userware
continued
Contents
Introduction ........................................................................\
..................................................................5.4
Applet version........................................................................\
...........................................................5.4
Disconnect ........................................................................\...

Page 5.2 Rev C  April 2011
5. Userware Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Image page ........................................................................\
.................................................................5.12
Colour Space ........................................................................\...

Rev C  April 2011 Page 5.3
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Global Colour page ........................................................................\
..................................................5.21
Global Colour Mode ........................................................................\...

Page 5.4 Rev C  April 2011
5. Userware Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 To use the Titan Userware the 
java Runtime Environment 
software must be installed on 
your browser. This software can 
be downloaded, free of charge 
from www.java.com.
  The LAN IP Address of the 
projector can be found in the 
Network submenu of the  Setup 
menu, as...

Rev C  April 2011 Page 5.5
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Standalone version
To install the Userware, simply copy the file (from the CD, or downloaded from 
the Digital Projection website), to a folder on the computer.
Double click on the filename to start the software.
The Userware interface is organised into a number of pages, as...

Page 5.6 Rev C  April 2011
5. Userware Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Show page
The Show page is the first to display when the browser connects to the projector .
To return to the Show page  at any time, click on Show.
On / Off
Click On to switch the projector On.
Click Off to switch the projector into Standby mode.
Shutter Open / Closed
Click on...