Home
>
Digital Projection
>
Projector
>
Digital Projection Titan Reference 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual
Digital Projection Titan Reference 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual
Here you can view all the pages of manual Digital Projection Titan Reference 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 161
Rev C April 2011 Page 7.15 Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix 3D sync 1 unused 2 Sync OUT 3 GND 4 GND 5 GND 6 unused 7 unused 8 unused 9 Sync IN Serial control input 1 unused 2 Received Data (RX) 3 Transmitted Data (TX) 4 unused 5 Signal Ground 6 unused 7 unused 8 unused 9 unused Null-modem cable (used to connect the projector to a computer) RX 2 --- 3 TX TX 3 --- 2 RX GND 5 --- 5 GND Serial port settings Baud rate 19,200 bps Data length 8 bits Stop bits...
Page 162
Page 163
Rev C April 2011 Page 7.17 Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix Operation Messages Operation messages are constructed using the following format: HeaderTypeSize CRCOper’n typeOperation Reserved 2 bytes 1 byte2 bytes 2 bytes1 byte2 bytes 2 bytes Data BEEF03190058580000000000 Byte # 123456789101112 Operation Target Operation ValueReserved 4 bytes 4 bytes4 bytes Data 000000000000000000000000 Byte # 131415161718192021222324 Reserved Reserved 4 bytes 4 bytes...
Page 164
Page 165
Rev C April 2011 Page 7.19 Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix Operation Command examples All operation commands are located at bytes 9 &10. All values are located at bytes 17 & 18 unless otherwise indicated power (0102) projector On or Standby Value On 00h Standby 04h Examples Set Projector (On) BEEF 03 1900 5858 01 0102 0000 00000000 00000000 00000000 00000000 00000000 Response 1E BEEF 03 1900 5858 01 0102 0000 00000000...
Page 166
Page 167
Rev C April 2011 Page 7.21 Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix Brightness (E502) Adjusts Brightness Range: -128 — +127 (00h - FFh) Centre (0): 128 (80h) For information about Brightness, Presets and Input 8: see Section 4, Overview . Examples Set Brightness 97 (128 + 97 = 225 = E1h) BEEF 03 1900 5858 01 E502 0000 00000000 E1000000 00000000 00000000 00000000 Response 1E BEEF 03 1900 5858 01 E502 0000 00000000 E1000000...
Page 168
Page 169
Rev C April 2011 Page 7.23 Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix Shutter (CF02) Closes and opens shutter Target Value (Set) (Get) Shutter Close 00h 01h Shutter Open 01h 00h Examples Set Shutter (Close) BEEF 03 1900 5858 01 CF02 0000 00000000 00000000 00000000 00000000 00000000 Response 1E BEEF 03 1900 5858 01 CF02 0000 00000000 00000000 00000000 00000000 00000000 Set Shutter (Open) BEEF 03 1900 5858...
Page 170
