Digital Projection Titan Hd-500, Hd-250 User Manual
Here you can view all the pages of manual Digital Projection Titan Hd-500, Hd-250 User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
Rev B 02/2007 Page 4.15 Digital Projection TITAN HD-500, HD-250 User Manual 4. Controlling the projector Notes Some menu controls can be accessed directly using the control keys (see earlier in this section). When the OSD is OFF, all menu navigation keys will be disabled. When the OSD is switched back ON, the menus will remain OFF until the key is pressed again. The menus will then reopen at the same point they were last viewed. If a menu is opened, and no other key is pressed...
Page 62
Page 63
Rev B 02/2007 Page 4.17 Digital Projection TITAN HD-500, HD-250 User Manual 4. Controlling the projector Slider bar The highlighted slider bar shows which control is active currently. To adjust the slider press and . Parameter selection To select from a number of parameters, (shown one at a time to the right), press and . These two items are greyed out and the values are blank, showing that they are not available, due to the effect of settings made in other menus, or due to the type of input...
Page 64
Page 65
Rev B 02/2007 Page 4.19 Digital Projection TITAN HD-500, HD-250 User Manual 4. Controlling the projector Notes Some menu controls can be accessed directly using the control keys (see earlier in this section). For more information about input modes and input presets, see earlier in this section, Input modes and settings. Input Menu Presets Input Menu Presets Recall Presets A ~ H Presets Sixteen sets of parameters can be saved and recalled (A – S). The parameters saved for each Preset...
Page 66
Page 67
Rev B 02/2007 Page 4.21 Digital Projection TITAN HD-500, HD-250 User Manual 4. Controlling the projector Notes Some menu controls can be accessed directly using the control keys (see earlier in this section). When using the menus, press OSD or to hide or reveal the On-Screen-Display. Picture Menu Some menu items may be greyed out - unavailable due to the effect of settings made in other menus, or due to the type of input signal. The Saturation slider is available for Composite, S-...
Page 68
Page 69
Rev B 02/2007 Page 4.23 Digital Projection TITAN HD-500, HD-250 User Manual 4. Controlling the projector Notes Aspect Ratio selection can be found in both the Picture and Geometry menus. When User Aspect is selected, the Aspect Ratio settings are taken from the User H Aspect and V Aspect settings made in the Geometry menu. The Sharpness slider is available for Composite, S-Video and Component SD inputs only. Aspect Ratio Press and to select Aspect Ratio. Press and to select from:...
Page 70
