Digital Projection Titan 1080p-500, 1080p-250 User Manual

							July 2007 Page 1.5
Digital Projection TITAN 1080p-500, 1080p-250 User Manual  1. Introduction
Side panel – connection and controlNotes
  For information about how 
to connect the projector, see 
Connecting the projector in 
section 2. Installation, and 
Connections in section 7. 
Appendix.
  For information about how 
to use the control panel, see 
section 4. Controlling the 
projector.
  For information about how to 
mount and stack projectors, see 
section 2. Installation.Input 
connectionsControl 
connections
Control panel
Adjustable 
foot 
						

							Page 1.6 July 2007
1. Introduction  Digital Projection TITAN 1080p-500, 1080p-250 User Manual 
						

							July 2007  Page 2.1
2. Installation
Contents
Screen requirements ......................................................................................................................... 2.2
Aspect ratio ...................................................................................................................................... 2.2
Fitting the image to the DMD ............................................................................................................. 2.2
Images displayed full width ............................................................................................................... 2.2
Images displayed full height .............................................................................................................. 2.2
 Diagonal screen sizes ..................................................................................................................... 2.3
Fitting the image to the screen ........................................................................................................... 2.4
Positioning the screen and projector ................................................................................................... 2.5
Choosing a lens .................................................................................................................................. 2.6
Choosing a lens using the lens charts ................................................................................................. 2.7
Full width images, including 2.35:1, 1.85:1 and 16:9 (native resolution) ....................................................... 2.7
example ....................................................................................................................................... 2.7
Full height image 1.66:1 (Vista) .......................................................................................................... 2.8
Full height image 4:3 ....................................................................................................................... 2.9
Full height image 5:4 ..................................................................................................................... 2.10
Choosing a lens by calculation .......................................................................................................... 2.11
example ...................................................................................................................................... 2.11
Useful lens calculations .................................................................................................................. 2.12
Lens extension ............................................................................................................................. 2.12
Fitting the lens ................................................................................................................................... 2.13
Shifting the image............................................................................................................................. 2.14
Mounting the projector .................................................................................................................... 2.15
Chassis adjustment ......................................................................................................................... 2.15
Fitting the optional rigging frame....................................................................................................... 2.15
Adjusting the rigging frame .............................................................................................................. 2.16
Stacking projectors .......................................................................................................................... 2.17
Connecting the projector ................................................................................................................ 2.18
Signal Inputs .................................................................................................................................. 2.18
EDID handshaking on the DVI and RGB2 inputs .................................................................................. 2.18
Control connection examples ........................................................................................................... 2.19
LAN connection ............................................................................................................................ 2.19
RS232 connection ......................................................................................................................... 2.19
Power connection ........................................................................................................................... 2.20 
						

							Page 2.2 July 2007
2. Installation  Digital Projection TITAN 1080p-500, 1080p-250 User Manual
Screen requirements
Aspect ratio
Fitting the image to the DMD
If the source image supplied to the projector is smaller than 1920 x 1080 pixels, 
then the image will not fi ll the DMD. The following example shows how a number 
of common formats may be displayed.
Images displayed full width
Images displayed full height
Notes
  The images are shown here 
scaled automatically by the 
projector.
  The image may be scaled 
differently if the Aspect Ratio is 
set differently in the Picture or 
Geometry menus.
2.35:1(Scope)
 =  817 pixels
full width = 1920 pixels
1.85:1
 = 1037 pixels
16:9 = 1.78:1
= 1080 pixels
(native resolution)
5:4 = 1.25:1 = 1350 pixels
4:3 = 1.33:1 = 1440 pixels
full height = 1080 pixels
1.66:2 (Vista) = 1792 pixels
16:9 = 1.78:1 = 1920 pixels
(native resolution) 
						

							July 2007 Page 2.3
Digital Projection TITAN 1080p-500, 1080p-250 User Manual  2. Installation
 Diagonal screen sizes
Screen sizes are sometimes specifi ed by their diagonal size (D) in inches. When 
dealing with large screens and projection distances at different aspect ratios, it is 
more convenient to measure screen width (W) and height (H).
The example calculations below show how to convert diagonal sizes in inches into 
width and height, at various aspect ratios.
2.35:1 (Scope)
W = D x 0.92in  (D x .023m) H = D x 0.39in  (D x .01m)
1.85:1
W = D x 0.88in  (D x .022m) H = D x 0.47in  (D x .012m)
16:9 = 1.78:1 (native aspect ratio)
W = D x 0.87in  (D x .022m) H = D x 0.49in  (D x .0125m)
1.66:1 (Vista)
W = D x 0.86in  (D x .022m) H = D x 0.52in  (D x .013m)
4:3 = 1.33:1
W = D x 0.8in  (D x .02m) H = D x 0.6in  (D x .015m)
5:4 = 1.25:1
W = D x 0.78in  (D x .02m) H = D x 0.625in  (D x .016m)
Notes
D = diagonal (inches)
W = width
H = height  
						

							Page 2.4 July 2007
2. Installation  Digital Projection TITAN 1080p-500, 1080p-250 User Manual
Fitting the image to the screen
It is important that your screen is of suffi cient height and width to display images at 
all the aspect ratios you are planning to use.
Use the conversion chart, or the sample calculations below to check that you are 
able to display the full image on your screen. If you have insuffi cient height or width, 
you will have to reduce the overall image size in order to display the full image on 
your screen.
Notes
1          2         3         4          5         6          7         8          9        10
Screen width
Screen height
4:3
5:4
16:9
2.35:1
Aspect ratio 10
9
8
7
6
5
4
3
2
1
2.35:1 (Scope)
W = H x 2.35 H = W x 0.426
1.85:1
W = H x 1.85 H = W x 0.54
16:9 = 1.78:1 (native aspect ratio)
W = H x 1.78 H = W x 0.56
1.66:1 (Vista)
W = H x 1.66 H = W x 0.6
4:3 = 1.33:1
W = H x 1.33 H = W x 0.75
5:4 = 1.25:1 
W = H x 1.25 H = W x 0.8
1.85:1
1.66:1 
						

							July 2007 Page 2.5
Digital Projection TITAN 1080p-500, 1080p-250 User Manual  2. Installation
Positioning the screen and projector
For optimum viewing, the screen should be a fl at surface perpendicular to the fl oor. 
The bottom of the screen should be 1.2m (4 feet) above the fl oor and the front row 
of the audience should not have to look up more than 30° to see the top of the 
screen.
The distance between the front row of the audience and the screen should be at 
least twice the screen height and the distance between the back row and the screen 
should be a maximum of 8 times the screen height. The screen viewing area should 
be within a 60° range from the face of the screen.
Notes
 The projector should be 
installed as close to the 
power outlet as possible.
  The power connection should 
be easily accessible, so that 
it can be disconnected in an 
emergency.
  Ensure that there is at least 
30cm (12in) of space between 
the ventilation outlets and 
any wall, and 10cm (4in) on 
all other sides.
  Do not install the projector 
close to anything that 
might be affected by its 
operational heat, for instance, 
polystyrene ceiling tiles, 
curtains etc.
  The image can be fl ipped for 
rear projection (see section 
4. Using the menus, Image 
menu) and displayed without 
the need for extra mirrors or 
equipment.
  However, you must ensure 
that there is suffi cient distance 
behind the screen for the 
projector to be correctly located.
  Rear installation is generally 
more complicated and advice 
should be sought from your 
local dealer before attempting it. 
						

							Page 2.6 July 2007
2. Installation  Digital Projection TITAN 1080p-500, 1080p-250 User Manual
Notes
  The High Brightness lenses 
are recommended for the 
1080p  
 
-500, for maximum light 
output.
  The High Contrast lenses 
are recommended for the 
1080p-250, for maximum 
contrast.
 
  For more information about 
Throw ratio factor (TRF), see 
Useful lens calculations, later 
in this section.
Choosing a lens
A number of lenses are available for use with the projector. Which lens you choose 
will depend on the screen size, image aspect ratio, projection distance and light 
output.
The lenses available and their part numbers are listed below:
    High Brightness  High Contrast
0.67 : 1 fi xed lens  105-607   107-195
1.12 : 1 fi xed lens (3 - 15m)  105-608      105-608
1.12 : 1 zoom lens (1.2 - 2m)  105-609      105-609
1.39 - 1.87 : 1 zoom lens  105-610      107-196
1.87 - 2.56 : 1 zoom lens  105-611      107-197
2.56 - 4.16 : 1 zoom lens  105-612      107-198
4.16 - 6.96 : 1 zoom lens  105-613      107-199
If you are simply connecting the output of a camera or computer directly to the 
projector, then the image size (in pixels) may well be fi xed. If, however, you are 
using commercially available image processing equipment, such as the Digital 
Projection VIP1000, you may be able to resize the image to fi t the DMD.
If the image does not fi ll the full width of the DMD, this effectively increases the 
throw ratio of the lens. This can be corrected for by applying a Throw ratio factor.
Method one: using the lens charts
For the screen sizes listed below, use the charts on the following pages, to choose 
the most suitable lens.
Full width images, including:
2.35:1 (Scope)  1920 x 817 pixels
1.85:1  1920 x 1037 pixels
16:9 = 1.78:1 1920 x 1080 pixels (native resolution)
Full height images
 A Throw ratio factor (TRF) has been applied to the following charts:
1.66:1 (Vista) 1792 x 1080 pixels    TRF = 1.07
4:3 = 1.33:1 1440 x 1080 pixels    TRF = 1.33
5:4 = 1.25:1 1350 x 1080 pixels    TRF = 1.42
Method two: by calculation
See the calculations, on the page immediately following the lens chart. 
						

							July 2007 Page 2.7
Digital Projection TITAN 1080p-500, 1080p-250 User Manual  2. Installation
Notes
  This chart has a TRF of 1.0, for 
use with the following images:
Choosing a lens using the lens charts
Use the charts on this page and on the following pages to choose which lens best 
suits your application.
Full width images, including 2.35:1, 1.85:1 and 16:9 (native resolution)
example
For a screen width of 10m at a distance of 30m, the 2.56- 4.16: 1 zoom lens 
would be best suited.
For the same screen size at a distance of 50m, the 4.16 - 6.96: 1 zoom lens 
would be best suited.
if you need to be more precise, then use the calculations on the page immediately 
following the lens charts. •
•2.35:1 (Scope),
1.85:1 and 16:9
1.12 : 1 fi xed lens
(1.2 - 2m)
105-609
105-6091.39 - 1.87 : 1 
zoom lens
105-610
107-1961.87 - 2.56 : 1 
zoom lens
105-611
107-1974.16 - 6.96 : 1 
zoom lens
105-613
107-199
0.67 : 1 fi xed lens
105-607
107-195
feet
metres Screen width
              10             20             30             40             50             60            70             80 metres
              33             66             98            131           164           197          230          262 feet  66 20
 49 15
 33 10
 16  5
Throw distance
2.56 - 4.16 : 1 
zoom lens
105-612
107-198
1.12 : 1 fi xed lens
(3 - 15m)
105-608
105-608 
						

							Page 2.8 July 2007
2. Installation  Digital Projection TITAN 1080p-500, 1080p-250 User Manual
Notes
  This chart has a TRF of 1.07, 
for use with the following 
images:
1.66:1 (Vista)
Lens charts continued
Full height image 1.66:1 (Vista)
Use the chart below to choose which lens best suits your application.
if you need to be more precise, then use the calculations on the page immediately 
following the lens charts.
1.12 : 1 fi xed lens
(1.2 - 2m)
105-609
105-6091.39 - 1.87 : 1 
zoom lens
105-610
107-1961.87 - 2.56 : 1 
zoom lens
105-611
107-1974.16 - 6.96 : 1 
zoom lens
105-613
107-199
0.67 : 1 fi xed lens
105-607
107-195
feet
metres Screen width
              10             20             30             40             50             60            70             80 metres
              33             66             98            131           164           197          230          262 feet  66 20
 49 15
 33 10
 16  5
Throw distance
2.56 - 4.16 : 1 
zoom lens
105-612
107-198
1.12 : 1 fi xed lens
(3 - 15m)
105-608
105-608