Digital Projection Projector M-Vision Cine 3D Series User Manual

Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page 9Rev A  August 2011
Advanced Menu
Color Space
Set.this.to.Auto,.except.when.the.projector.has.problems.selecting.between.YPbPr,.YCbCr.and.RGB.
Gamma, Color Temperature and Color Gamut
Set.this.to.suit.the.specification.of.the.input.source,.or.to.improve.the.appearance.of.the.projected.image.
Brilliant Color® and Adaptive Contrast
Set.these.to.suit.your.brightness.and.contrast.requirements.
Fine Sync...

Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page 10Rev A  August 2011
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
System Menu
Language
This.product.is.available.only.in.English.at.present.
Menu Position
Set.this.to.determine.the.position.of.the.menus.on.the.screen.
Blank Screen
Set.this.to.determine.what.appears.on.screen.when.the.projector.is.searching.for.a.valid.input.source.
Auto Power Off...

Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page 11Rev A  August 2011
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
System Menucontinued
Rear Projection
Set.this.to.On.to.reverse.the.image.from.left.to.right,.for.use.in.Rear.Projection.Mode.
Ceiling Mode
Set.this.to.On.to.reverse.the.image.from.top.to.bottom,.for.use.in.Ceiling.Mode.
Lamp Power
Set.this.to.Economy.to.run.the.lamp.at.reduced.power.
•
•
• 

Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page 12Rev A  August 2011
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
 The Trigger outputs can be 
used to automatically control the 
screen or screen shuttering. See 
the Connection Guide for more 
information.
 To set what a ‘blank’ screen looks 
like, use the Blank Screen setting 
in the System menu.
Control Menu
Keys 1 to 5...

Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page 1Rev A  August 2011
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
Ser vice MenuInformation
Ser vice MenuFactor y Reset
 Do NOT do this unless you are 
sure that you want to restore ALL 
the current settings to their factory 
defaults.
Ser vice Menu
Information
Press.ENTER/SELECT.to.view.information.about.the.projector,.eg:
Factor y Reset...

Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page 1Rev A  August 2011
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
Ser vice Menucontinued
Blue Only
Set.this.to.On.to.display.only.the.blue.component.of.the.input.signal,.for.calibration.or.test.purposes.
Test Patterns
Use..or.to.select.from.a.range.of.test.patterns.
Press.MENU.to.return.to.the.menu,.or..ENTER/SELECT.to.return.to.the.currently.selected.input.signal....

Digital Projection M-Vision Cine 3D series  3. MENU MAP  Operating Guide
Page 1Rev A  August 2011
Menu Map
Menu Sub Menus and Controls
MAIN
Aspect Ratio  1:9, Theaterscope, :, : Narrow, Native
Presets
Recall..A, B, C, D, Default
Save..A, B, C, D
Brightness
Contrast
Saturation
Hue
Sharpness
Noise Reduction
Overscan  Off, Crop, Zoom
Input Select  all available inputs
Resync  Projector will re-synchronise with the current input signal
3D Settings
3D.Enable..Off, On...

Digital Projection M-Vision Cine 3D series  3. MENU MAP  Operating Guide
Page 1Rev A  August 2011
SYSTEM
Language  English only
Menu Position  Top Left, Top Right, Bottom Left, Bottom Right, Centre
Blank Screen  Logo, Black, Blue, White
Auto Power Off   On, Off
Auto Power On   On, Off
Rear Projection   Off, On
Ceiling Mode   Off, On
Lamp Power   Standard, Economy
CONTROL
1 Key   all available inputs
2 Key   all available inputs
3 Key   all available inputs
4 Key   all available inputs
5 Key   all...