Digital Projection Projector M-Vision Cine 3D Series User Manual

Rev A  August 2011
M-Vision Cine 3D series
High Brightness Digital Video Projector 
16:9 widescreen display
OPERATING GUIDE
112-022A 

Digital Projection M-Vision Cine 3D series  CONTENTS  Operating Guide
Rev A  August 2011
CONTENTS
About this Guide ........................................................................\
...................1
Symbols used in this guide ........................................................................\
..1
Warnings.........................................................................\
............................1
Notes.........................................................................\...

Digital Projection M-Vision Cine 3D series  ABOUT THIS GUIDE  Operating Guide
Page 1Rev A  August 2011
About this Guide
Please.read.this.guide.carefully.before.using.the.projector,.and.keep.it.handy.for.future.reference.
A.serial.number.is.located.on.the.side.of.the.projector..Record.it.here:.
Symbols used in this guide
Warnings
 ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
 WARNING: this symbol indicates that there...

Digital Projection M-Vision Cine 3D series  1. USING THE MENUS  Operating Guide
Page 2Rev A  August 2011
Using the Menus
Use.the.buttons.on.the.projector.control.
panel.or.on.the.remote.control,.to.access.the.
menu.system.
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded green on the actual menu.
Remote controlProjector control panel
Navigating the menus
To.open.another.menu,.first.close.the.
current.menu.by.pressing.MENU,....

Digital Projection M-Vision Cine 3D series  1. USING THE MENUS  Operating Guide
Page Rev A  August 2011
Submenus
Select.a.submenu.using
.and.
then.press.ENTER/SELECT.
•
•
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded green on the actual menu.
The.submenu.opens,.with.the.first.item.
highlighted.
•
To.close.the.submenu,.press.MENU.• 

Digital Projection M-Vision Cine 3D series  1. USING THE MENUS  Operating Guide
Page Rev A  August 2011
Selecting parameters
Most.parameters.are.changed.by.selecting.
from.a.list:
Select.from.the.list.using
.and..
The.change.will.be.made.immediately.
•
•
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded green on the actual menu.
Some.parameters.are.changed.by.selecting.
from.a.submenu.
Press.ENTER/SELECT.to.open.the.
submenu....

Digital Projection M-Vision Cine 3D series  1. USING THE MENUS  Operating Guide
Page Rev A  August 2011
Sliders
Activate.the.slider.by.pressing
.or..
•
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded green on the actual menu.
Commands
To.use.a.command,.press.ENTER/
SELECT.
In.the.example.below,
use..or.to.select.YES.or.NO,
then.press.ENTER/SELECT.to.confirm.
your.selection.
•
•
Use..or.to.adjust.the.value....

Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page Rev A  August 2011
A Tour of  the Menus
Main Menu
Aspect Ratio
Use..or..to.choose.between.16:9,.Theaterscope,.4:3,.4:3 Narrow.and.Native.
Examples
•
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
 The Native image examples shown 
here have far fewer pixels than 
the 1920 x 1080 of the DMD. Your 
image may be different.
 When displaying a 1:9 image, DO 
NOT use...

Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page Rev A  August 2011
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
 An anamorphic lens is used 
with the Theaterscope setting, to 
ensure that for a 2.35:1 image, the 
maximum area of the DMD is used, 
giving maximum image brightness.
 The 4:3 Narrow setting is used to 
compensate for the distortion that an 
anamorphic lens would cause to a 
: image.
 When...

Digital Projection M-Vision Cine 3D series  2. A TOUR OF THE MENUS  Operating Guide
Page 8Rev A  August 2011
Brightness, Contrast, Saturation, Hue, Sharpness and Noise Reduction
Adjust.the.sliders.for.these.settings.
Overscan
Choose.from.Off,.Crop.or.Zoom.
Input Select
Choose.which.input.source.to.display.
Resync
Press.ENTER/SELECT.to.force.the.projector.to.re-synchronise.with.the.current.input.signal.
3D Settings
Press.ENTER/SELECT.to.open.the.3D.settings.sub-menu.
Set.3D Enable.to.On.or.Off.
Set.3D...